DIY: Oil Cooler (scratch built install, lottsa pics).....>.

iceman21_23 · 10-08-2009, 01:03 PM

alright all my parts have been ordered ill be undergoing this job soon! i also went with the 36 row cooler instead of the 24, just to be on the safe side

iceman21_23 · 10-28-2009, 01:06 PM

just an update everything is installed and oil temps haven't seen above 190-200 degrees and that's me pushing it as much as i could on the street.

370Zsteve · 10-28-2009, 01:11 PM

Quote:

Originally Posted by iceman21_23

just an update everything is installed and oil temps haven't seen above 190-200 degrees and that's me pushing it as much as i could on the street.

That's great news. Did you do the install as per the OP? I've done a couple of oil coolers in my time, also used the Aeroquip lines and never had issues.

Whether on the track or the street, Heat = bad

My first Mod will be an oil cooler, prolly the same spec as the OP. Great post, Modshack, ftw!

Rogue Z · 10-28-2009, 01:28 PM

Could you flip an oil cooler upside down to have the oil coming out the bottom or do you have to buy one designed like that?

Modshack · 10-28-2009, 01:49 PM

Quote:

Originally Posted by Rogue Z

Could you flip an oil cooler upside down to have the oil coming out the bottom or do you have to buy one designed like that?

Huh? I'm confused...My install DOES have the lines coming out the bottom. If the question is can any cooler be set-up this way, then the answer is yes. It makes no difference, Top, Bottom, or side. Just keep in mind, if you have the feeds lines coming out of the top of the cooler, you'll always have a quart of dirty oil in there when you do oil changes...

Rogue Z · 10-28-2009, 03:29 PM

ohh...i guess what i was asking was the setrab oil coolers show the setup with the hoses coming out of the top( stillen, Nissan Motor sport) if you were to get one of these would you be able to flip it so the hoses are on the bottom..-----sorry if this is a stupid question.

Modshack · 10-28-2009, 03:31 PM

Quote:

Originally Posted by Rogue Z

ohh...i guess what i was asking was the setrab oil coolers show the setup with the hoses coming out of the top( stillen, Nissan Motor sport) if you were to get one of these would you be able to flip it so the hoses are on the bottom..-----sorry if this is a stupid question.

Sure...Just a matter of fabbing up the right brackets..

sylenze · 10-28-2009, 04:24 PM

mod, does setrab,mocal, or trucool have a cooler core thats wider but shorter... just like ARC's oil cooler....

Modshack · 12-31-2009, 01:32 PM

Some info on winter temps and a simple mod to keep your temps up now posted at the end of the DIY

yellowZ · 12-31-2009, 01:46 PM

I ordered the parts, they were shipped, and I'm awaiting arrival. I'm excited to do this upgrade and will post when I'm finished! Thanks!

Update 1/19/09 - Finished the install, cleared up any leaks & also did the differential & transmission fluids. Running it hard results in a temp of 185F (ambient temp 60F). Since I live in Texas, the reason for doing this was the summer heat. I'll report back when its 110F outside.

vipor · 01-05-2010, 11:55 AM

Spec'd out a 25 Row Setrab cooler and pretty much everything else the same. Have to buy the bracket separately. Increases the price a lot though. $500 shipped.

here's the bracket:
Mocal Oil Coolers - Mocal 235 Matrix Oil Cooler Bracket

thanks for the info Mod, that site is cheap compared to everyone else

teejnut · 01-06-2010, 03:04 AM

2 questions...

1. Has anyone tried doing the install without removing the bumper? I was doing my oil change the other day and it seems like this is definitely possible. Just wondering if anyone else has tried.

2. Are you guys attaching the bracket to the 2 holes on the plastic cross member? How are you doing this? Just bolts, washers, and nuts?

Modshack · 01-19-2010, 01:03 PM

Quote:

Originally Posted by teejnut

2 questions...

1. Has anyone tried doing the install without removing the bumper? I was doing my oil change the other day and it seems like this is definitely possible. Just wondering if anyone else has tried.

2. Are you guys attaching the bracket to the 2 holes on the plastic cross member? How are you doing this? Just bolts, washers, and nuts?

1) NOT advisable. Don't be freaked out by the bumper removal...It's basically a 15 minute job, if that. Once you have the lower pan off, it is 6-8 plastic rivets along the top and (2) 10mm bolts at the sides.

2) Yes, I just attached my bracket to those holes with some bolts, washers and nylock nuts that won't vibrate loose.

AK370Z · 01-20-2010, 02:31 AM

Quote:

Originally Posted by Modshack

While your at it, upgrade your filter. See this thread Don't Use Nissan OEM Oil Filters (Long Post - Lotsa Pics) - MyG37

Hey Modshak,

this is probably off topic and I apologize in advance for changing the topic, but how are you liking the purolator oil filter? I have been using K&N HP-1008 but I have heard great things about Purolator. I am kinda looking for your own input on the purolator vs others you've used in past . I think I want to try some other oil filters.

Thanks.

LiquidZ · 01-20-2010, 07:40 AM

AK, I hope you don't mind me chiming in here. Purolator is a great oil filter. In my opinion, I would run it over the K&N in a heartbeat. Another brand I would try would be Wix. I currently am using a Wix filter on my Z.

10-28-2009, 01:06 PM	#77 (permalink)
iceman21_23 Track Member Join Date: Jan 2009 Location: league city, tx Posts: 757 Drives: 09' Solid Red 370z Rep Power: 17	just an update everything is installed and oil temps haven't seen above 190-200 degrees and that's me pushing it as much as i could on the street. 370Zsteve likes this.

10-28-2009, 01:28 PM	#79 (permalink)
Rogue Z Track Member Join Date: May 2009 Location: Los Angeles Posts: 559 Drives: 2009 Silver MT 370Z Rep Power: 18	Could you flip an oil cooler upside down to have the oil coming out the bottom or do you have to buy one designed like that? __________________

10-28-2009, 03:29 PM	#81 (permalink)
Rogue Z Track Member Join Date: May 2009 Location: Los Angeles Posts: 559 Drives: 2009 Silver MT 370Z Rep Power: 18	ohh...i guess what i was asking was the setrab oil coolers show the setup with the hoses coming out of the top( stillen, Nissan Motor sport) if you were to get one of these would you be able to flip it so the hoses are on the bottom..-----sorry if this is a stupid question. __________________

12-31-2009, 01:32 PM	#84 (permalink)
Modshack A True Z Fanatic Join Date: Mar 2009 Location: Greenville NC Posts: 2,883 Drives: 370Z Sport Rep Power: 976	Some info on winter temps and a simple mod to keep your temps up now posted at the end of the DIY __________________ Steal my car! (SOLD)...Now Porsche Cayman S Oil Cooler DIY: Here!

12-31-2009, 01:46 PM	#85 (permalink)
yellowZ Base Member Join Date: Jun 2009 Location: Austin, TX Posts: 77 Drives: Nissan 370Z - Yellow Rep Power: 16	I ordered the parts, they were shipped, and I'm awaiting arrival. I'm excited to do this upgrade and will post when I'm finished! Thanks! Update 1/19/09 - Finished the install, cleared up any leaks & also did the differential & transmission fluids. Running it hard results in a temp of 185F (ambient temp 60F). Since I live in Texas, the reason for doing this was the summer heat. I'll report back when its 110F outside. Last edited by yellowZ; 01-19-2010 at 07:42 PM.

10-08-2009, 01:03 PM	#76 (permalink)
iceman21_23 Track Member Join Date: Jan 2009 Location: league city, tx Posts: 757 Drives: 09' Solid Red 370z Rep Power: 17	alright all my parts have been ordered ill be undergoing this job soon! i also went with the 36 row cooler instead of the 24, just to be on the safe side

10-28-2009, 04:24 PM	#83 (permalink)
sylenze Base Member Join Date: Mar 2009 Location: So Cal/SB county Posts: 222 Drives: 370z 6mt+SP PG Rep Power: 16	mod, does setrab,mocal, or trucool have a cooler core thats wider but shorter... just like ARC's oil cooler....

01-05-2010, 11:55 AM	#86 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	Spec'd out a 25 Row Setrab cooler and pretty much everything else the same. Have to buy the bracket separately. Increases the price a lot though. $500 shipped. here's the bracket: Mocal Oil Coolers - Mocal 235 Matrix Oil Cooler Bracket thanks for the info Mod, that site is cheap compared to everyone else __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

01-06-2010, 03:04 AM	#87 (permalink)
teejnut Base Member Join Date: Sep 2009 Location: Burbank, CA Posts: 206 Drives: 09 Z34 Sport/6MT Rep Power: 16	2 questions... 1. Has anyone tried doing the install without removing the bumper? I was doing my oil change the other day and it seems like this is definitely possible. Just wondering if anyone else has tried. 2. Are you guys attaching the bracket to the 2 holes on the plastic cross member? How are you doing this? Just bolts, washers, and nuts? __________________ \|KW v3\|SSR Type F\|Invidia\|Berk\|Stillen\|Kenwood/Focal/Image Dynamics/Alpine\|

01-20-2010, 07:40 AM	#90 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	AK, I hope you don't mind me chiming in here. Purolator is a great oil filter. In my opinion, I would run it over the K&N in a heartbeat. Another brand I would try would be Wix. I currently am using a Wix filter on my Z. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 06:47 AM
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 07:09 PM
Anyone done a DIY for a 34r cooler install?	bigdog1250	DIY Section (Do-It-Yourself)	7	07-05-2012 11:38 AM
Oil Cooler Install	Zedx	Engine & Drivetrain	10	05-19-2011 03:35 AM
install oil cooler?	Mt Tam I am	Nissan 370Z General Discussions	5	08-25-2010 10:08 AM