|
I know this is an old post but I figured I would share my old install pics.. the piece I found to mount the cooler was an actual "tool" I
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
10-25-2016, 11:22 AM
|
#38 (permalink) |
|
Track Member
 
Join Date: May 2012
Location: Kentucky
Posts: 541
Drives: Like a batouttahell!
Rep Power: 14  |
I know this is an old post but I figured I would share my old install pics.. the piece I found to mount the cooler was an actual "tool" I found in home depot. Just drilled for custom mounting. It had a slotted groove on both sides that slid onto the mounting area and the cooler. Then I just drilled and secured with bolts. I also removed the metal "bumper" underneath the bumper for airflow and weight reduction. Say what you will but that metal bar is not stopping something traveling at 60+ mph regardless... might stop the engine from ending up in your lap... just drive correctly and be careful. Thats my disclaimer. Hope this helps.
__________________
| AEM | INVIDIA | GREDDY | STANCE | NISMO | SETRAB | STOPTECH | HAWK | TOYO | HANKOOK | BRIDE (wishlist) |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Real Auto Dynamics built and R/T tuned built motor TT | Mr.Squeeze | Forced Induction | 132 | 04-18-2014 06:09 PM |
| Anyone done a DIY for a 34r cooler install? | bigdog1250 | DIY Section (Do-It-Yourself) | 7 | 07-05-2012 10:38 AM |
| Oil Cooler Install | Zedx | Engine & Drivetrain | 10 | 05-19-2011 02:35 AM |
| install oil cooler? | Mt Tam I am | Nissan 370Z General Discussions | 5 | 08-25-2010 09:08 AM |
17Likes
Threaded Mode
