DIY: TWM Short Shifter and Leather Shifter Boot

Mitco39 · 04-13-2013, 11:35 AM

Yup I will do that, I am pretty sure it has a ring? Could be wrong though. Its on the list of things to do. Thanks!

GaleForce · 04-13-2013, 11:59 AM

Quote:

Originally Posted by Mitco39

Yup I will do that, I am pretty sure it has a ring? Could be wrong though. Its on the list of things to do. Thanks!

You're right. I just went back through my pictures and see the TWM has a white plastic ring. Weird that I don't have the rattle. Possibly because of the rubber o-ring I added. I'm sure it'll rattle now that I said it doesn't.

simota1 · 04-17-2013, 07:46 AM

repped

for having an awesome write up

Dzel · 04-26-2013, 04:04 PM

Great job!

N0SL3N · 05-02-2013, 01:29 PM

Just finished installing this. Write Up made it really easy. I took my time so it took a couple hours. Hardest parts for me were removing the bolt from the bottom of the linkage and removing the white cup from the stock shifter.

I found that pulling down on the shifter from under the car (ie compress the spring like when reversing) it made it more accessible to get the socket on the bolt head.

To remove the white cup I found that adding new grease made it come off easier.

Funny enough getting the dust boot back on was the easiest part of this install and took me 30 seconds. The key is starting from the front and using two hands to pull around on both sides.

Haven't driven it yet so I cannot comment on that.

GaleForce · 05-02-2013, 05:23 PM

Good job

Live4Driving · 06-05-2013, 07:35 AM

I used this to install mine last night. It was very helpful. Thanks +1

GaleForce · 06-05-2013, 08:13 AM

Quote:

Originally Posted by Live4Driving

I used this to install mine last night. It was very helpful. Thanks +1

I'm glad it helped.

I think TWM should send me a t-shirt or something

Dzel · 06-05-2013, 08:21 AM

I hung around with Z34_nismo and he did his ST shifter. Can't wait till I'm able to get mine.

JARblue · 08-13-2013, 09:04 AM

I picked up a TWM short shifter from a fellow forum member this weekend and will be tackling this soon. Seems like just about every question has been asked and answered, so

to everyone for that.

However, I was wondering if you guys had to jack up the car to get to the underside of the shifter assembly? Being a big fat a$$, I am concerned whether I can get far enough under the car to reach the linkage without jacking it up

GaleForce · 08-13-2013, 09:21 AM

Quote:

Originally Posted by JARblue

I picked up a TWM short shifter from a fellow forum member this weekend and will be tackling this soon. Seems like just about every question has been asked and answered, so

to everyone for that.

However, I was wondering if you guys had to jack up the car to get to the underside of the shifter assembly? Being a big fat a$$, I am concerned whether I can get far enough under the car to reach the linkage without jacking it up

No chance, unless you're a 99lb girl, you are not going to fit. It's best to jack the car up on jack stands or a hoist.

kenchan · 08-13-2013, 09:48 AM

nismo doesn't even use jackstands or jacks. he just lifts the car with one arm.

JARblue · 08-13-2013, 10:13 AM

Quote:

Originally Posted by GaleForce

No chance, unless you're a 99lb girl, you are not going to fit. It's best to jack the car up on jack stands or a hoist.

I figured as much.

Quote:

Originally Posted by kenchan

nismo doesn't even use jackstands or jacks. he just lifts the car with one arm.

I thought he was only bench pressing a 350Z

kenchan · 08-13-2013, 10:17 AM

JARblue · 09-28-2013, 02:21 PM

I just did this install

Thanks for the DIY, BFG

04-13-2013, 11:35 AM	#61 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	Yup I will do that, I am pretty sure it has a ring? Could be wrong though. Its on the list of things to do. Thanks! __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

04-17-2013, 07:46 AM	#63 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	repped for having an awesome write up GaleForce likes this. __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

04-26-2013, 04:04 PM	#64 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Great job! __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

05-02-2013, 01:29 PM	#65 (permalink)
N0SL3N Enthusiast Member Join Date: Dec 2011 Location: Toronto Posts: 376 Drives: 2009 PG 370z 6MT Rep Power: 35	Just finished installing this. Write Up made it really easy. I took my time so it took a couple hours. Hardest parts for me were removing the bolt from the bottom of the linkage and removing the white cup from the stock shifter. I found that pulling down on the shifter from under the car (ie compress the spring like when reversing) it made it more accessible to get the socket on the bolt head. To remove the white cup I found that adding new grease made it come off easier. Funny enough getting the dust boot back on was the easiest part of this install and took me 30 seconds. The key is starting from the front and using two hands to pull around on both sides. Haven't driven it yet so I cannot comment on that. navyflyer72 likes this. __________________ \| Akuma \| Motordyne \| Z1 \| NST \| CNT \| Stillen \| Avant Garde \| RJM \| Performix \| Tint \| LED \| GTR \| Nissan \|

05-02-2013, 05:23 PM	#66 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Good job __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

06-05-2013, 07:35 AM	#67 (permalink)
Live4Driving Base Member Join Date: Nov 2012 Location: Michigan Posts: 78 Drives: 12 Nissan 370Z PG M6 Rep Power: 13	I used this to install mine last night. It was very helpful. Thanks +1 GaleForce likes this. __________________ 12' Nissan 370Z - Build Thread: Link 15' Nissan GTR Previous Toys: 15' Nissan 370Z, 12' Nissan 370Z, 00' Chevrolet Corvette, 00' Toyota MRS 2ZZ & 6MT Swap

06-05-2013, 08:21 AM	#69 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	I hung around with Z34_nismo and he did his ST shifter. Can't wait till I'm able to get mine. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

08-13-2013, 09:04 AM	#70 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I picked up a TWM short shifter from a fellow forum member this weekend and will be tackling this soon. Seems like just about every question has been asked and answered, so to everyone for that. However, I was wondering if you guys had to jack up the car to get to the underside of the shifter assembly? Being a big fat a$$, I am concerned whether I can get far enough under the car to reach the linkage without jacking it up __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

08-13-2013, 09:48 AM	#72 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	nismo doesn't even use jackstands or jacks. he just lifts the car with one arm.

08-13-2013, 10:17 AM	#74 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521

09-28-2013, 02:21 PM	#75 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I just did this install Thanks for the DIY, BFG GaleForce likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Shifter Boot fix with after market shift knob	Dembflyr	DIY Section (Do-It-Yourself)	11	05-21-2014 10:21 PM
[FOR SALE] AMS Short Throw, Blox Racing Ball, Redline shortend shifter boot	The Shocker	Parts for sale (Private Classifieds)	32	08-16-2011 11:21 PM
Need advise with new shifter knob and boot	The Shocker	Exterior & Interior	12	05-20-2011 12:19 PM
Aftermarket shift knob with short throw shifter and factory boot	m4a1mustang	Exterior & Interior	18	06-09-2009 09:15 AM
Short Shifter	Trolling222	Engine & Drivetrain	2	03-13-2009 06:00 PM