Stillen G3 Intake Install

joshs09slvrZ · 07-30-2011, 12:26 PM

What's up guys! I ordered my intake about 3 weeks ago and now that I'm back from my wedding and honeymoon, I finally had time to install it. I had actually planned on doing it today, but when I got home last night I started removing the bumper and just didn't stop lol.

This isn't a big write up; but I did take a few pictures along the way.

Removing the bumper=super easy (1 man job).

I have these little wind deflectors in front of both front tires so I had a couple extra bolts to remove than the DIY said.

Here we have the stock intakes removed:

The dreaded "cutting" part of the install was super easy as well. I used a Dremel tool with a round sanding bit attached to it. I went with this versus a cutting type tip because it was easier and made the hole cleaner and was much safer around the AC lines. Here is the tip I used. This picture is AFTER I cut the holes...that's the black junk you see on the tip:

Here is the hole after I enlarged it:

Got the passenger side installed first:

Here are the final shots with everything installed:

Driver's side:

Passenger's side:

All in all, this was a super easy install. I did not use the instructions provided in the box, but instead followed AK370's write up which was very detailed and easy to follow. Also, resetting the windows and clock took like 2 minutes to do once the battery was reconnected.

I only took it for a quick test drive, but the sound and performance were definitely improved. I would recommend this to anyone who's looking for a great mod. Reasonably priced and very easy to install.

Questions and comments welcomed!!

ggiwin · 07-30-2011, 12:55 PM

so you wrapped the ac line with the rubber piece they gave you right?

joshs09slvrZ · 07-30-2011, 01:15 PM

Quote:

Originally Posted by ggiwin

so you wrapped the ac line with the rubber piece they gave you right?

Yep! Zip tied them and everything!

40TH4ME · 08-16-2011, 01:28 PM

Can't believe you had the guts to do that job yourself! How was the fitment of the bumper going BACK on? That's what I dread the most. Parts coming off without a hitch, but look like hammered dog doodoo when they go back on.

red6spd · 08-16-2011, 01:49 PM

Quote:

Originally Posted by 40TH4ME

Can't believe you had the guts to do that job yourself! How was the fitment of the bumper going BACK on? That's what I dread the most. Parts coming off without a hitch, but look like hammered dog doodoo when they go back on.

Most guys think the same way when they look at what you have to do in order to do this install, I'm one of them. But everything worked out fine.

joshs09slvrZ · 08-17-2011, 08:52 AM

Quote:

Originally Posted by red6spd

Most guys think the same way when they look at what you have to do in order to do this install, I'm one of them. But everything worked out fine.

Yes...taking the bumper off and putting it back on was cake. I know one of the write ups said to have two people do it...but I had no trouble doing it myself. The fitment was perfect as well.

wstar · 08-17-2011, 09:39 AM

I've had my bumper off and back on in my own garage at least 10 times over the life of the car so far. It's an easy job, and it's fits back together just fine every time

Alchemy · 08-17-2011, 03:59 PM

This install couldnt be easier, nobody should fear it. My advice, grab a beer, do it yourself, then sit back, look at the finished product and bask in your manhood.

techumper · 08-17-2011, 06:13 PM

nice write up, can't wait to do this on my Z!! That and the exhaust cause it's stock right now :/

Alchemy · 08-17-2011, 06:37 PM

Quote:

Originally Posted by techumper

nice write up, can't wait to do this on my Z!! That and the exhaust cause it's stock right now :/

Too bad you just missed Stillens buy a cat back exhaust get a gen3 intake free sale!! It just ended. I took advantage of the same deal last year round xmas. Keep an eye on their site, seems they run the sale a few times a year.

joshs09slvrZ · 08-19-2011, 10:41 PM

You know...with this intake, it makes the stock exhaust sound so much better!

Alchemy · 08-20-2011, 08:01 AM

Quote:

Originally Posted by joshs09slvrZ

You know...with this intake, it makes the stock exhaust sound so much better!

Ya know what makes the stock exhaust sound even better??? Replacing it with an aftermarket CBE

joshs09slvrZ · 09-07-2011, 08:52 PM

Quote:

Originally Posted by Alchemy

Ya know what makes the stock exhaust sound even better??? Replacing it with an aftermarket CBE

Funny you should say this. I just ordered a Berk CBE/HFC combo.

Alchemy · 09-08-2011, 01:11 AM

Quote:

Originally Posted by joshs09slvrZ

Funny you should say this. I just Oordered a Berk CBE/HFC combo.

Awesome

ShockWave · 05-12-2012, 08:15 PM

I didnt get any wrapped rubber piece for the ac line. Should I contact them?

07-30-2011, 12:26 PM	#1 (permalink)
joshs09slvrZ Track Member Join Date: May 2010 Location: Spring Hill, FL Posts: 547 Drives: 09 7AT 370Z Rep Power: 16	Stillen G3 Intake Install What's up guys! I ordered my intake about 3 weeks ago and now that I'm back from my wedding and honeymoon, I finally had time to install it. I had actually planned on doing it today, but when I got home last night I started removing the bumper and just didn't stop lol. This isn't a big write up; but I did take a few pictures along the way. Removing the bumper=super easy (1 man job). I have these little wind deflectors in front of both front tires so I had a couple extra bolts to remove than the DIY said. Here we have the stock intakes removed: The dreaded "cutting" part of the install was super easy as well. I used a Dremel tool with a round sanding bit attached to it. I went with this versus a cutting type tip because it was easier and made the hole cleaner and was much safer around the AC lines. Here is the tip I used. This picture is AFTER I cut the holes...that's the black junk you see on the tip: Here is the hole after I enlarged it: Got the passenger side installed first: Here are the final shots with everything installed: Driver's side: Passenger's side: All in all, this was a super easy install. I did not use the instructions provided in the box, but instead followed AK370's write up which was very detailed and easy to follow. Also, resetting the windows and clock took like 2 minutes to do once the battery was reconnected. I only took it for a quick test drive, but the sound and performance were definitely improved. I would recommend this to anyone who's looking for a great mod. Reasonably priced and very easy to install. Questions and comments welcomed!!

08-17-2011, 09:39 AM	#7 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	I've had my bumper off and back on in my own garage at least 10 times over the life of the car so far. It's an easy job, and it's fits back together just fine every time __________________ 7AT Track Car! Journal thread / Car setup details

08-17-2011, 03:59 PM	#8 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	This install couldnt be easier, nobody should fear it. My advice, grab a beer, do it yourself, then sit back, look at the finished product and bask in your manhood. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen 3 Intake + Nismo - My Install Results	torpedo2k	Nismo 370Z	10	03-14-2015 07:49 PM
Stillen Gen 3 Cold air intake Install Cost?	Joe711	Intake/Exhaust	7	06-03-2011 11:43 PM
Stillen Generation 3 Ultra Long Tube Dual Intake Kit- NISMO Install	torpedo2k	Nismo 370Z	4	02-13-2011 01:00 AM
Stillen gen.3 intake install complications...	Zrod	Intake/Exhaust	3	01-27-2010 09:49 PM

07-30-2011, 12:55 PM	#2 (permalink)
ggiwin Base Member Join Date: Jun 2010 Location: orange county Posts: 226 Drives: 2010 AT PW Rep Power: 15	so you wrapped the ac line with the rubber piece they gave you right?

08-16-2011, 01:28 PM	#4 (permalink)
40TH4ME Base Member Join Date: Jun 2010 Location: West Texas Lubbock Posts: 68 Drives: 2011 PPW Rep Power: 15	Can't believe you had the guts to do that job yourself! How was the fitment of the bumper going BACK on? That's what I dread the most. Parts coming off without a hitch, but look like hammered dog doodoo when they go back on.

08-17-2011, 06:13 PM	#9 (permalink)
techumper Base Member Join Date: Jul 2011 Location: cali Posts: 26 Drives: 09 370z M6 Touring Rep Power: 14	nice write up, can't wait to do this on my Z!! That and the exhaust cause it's stock right now :/

08-19-2011, 10:41 PM	#11 (permalink)
joshs09slvrZ Track Member Join Date: May 2010 Location: Spring Hill, FL Posts: 547 Drives: 09 7AT 370Z Rep Power: 16	You know...with this intake, it makes the stock exhaust sound so much better!

05-12-2012, 08:15 PM	#15 (permalink)
ShockWave Enthusiast Member Join Date: Dec 2011 Location: houston Posts: 303 Drives: 350z Rep Power: 13	I didnt get any wrapped rubber piece for the ac line. Should I contact them?