DIY: SpawnAero CF B-Pillars

[bullitt5897]

Hey everybody,

Here is the long over due DIY for the CF B-pillars from SpawnAero. Enjoy the pictures and videos!

Step 1: Remove the OEM B-pillars try not to break the brackets on the back

Step 2: Put all the tabs into their places

Step 3: Apply strips of 3M double sided tape to the back of the clips (3 strips for the top clip and 4 strips for the bottom 2 clips)

Step 4: Align and place the CF B-Pillars ontop of the clips (press down onto the clips)

Step 5: Slowly remove the CF B-Pillar from the door to the back (make sure all the 3M tape stay on the CF B-Pillar)

Step 6: Remove the clips and place them on the CF B-Pillars

Step 7: Apply the Super glue around the base of the clips and cover the 3M all the way to the CF backing (make sure to have a good bead of glue on the CF backing)

Step 8: Let it dry for about 5-10 minutes

Step 9: Plug them in

Step 10: Your Done go Drink a Beer!

Vids:

YouTube - SpawnAero DIY B Pillars 1/4

YouTube - SpawnAero DIY B Pillars 2/4

YouTube - SpawnAero DIY B Pillars 3/4

YouTube - SpawnAero DIY B Pillars 4/4