|
So... If anyone reading this DIY runs into this issue or doesn't want to run into this issue, Before you screw the 2 top torques, place the lower black lip
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
08-07-2014, 07:39 AM
|
#1 (permalink) |
|
Base Member
Join Date: May 2014
Location: NOVA
Posts: 60
Drives: 09 Nissan370z PW M6
Rep Power: 11  |
So... If anyone reading this DIY runs into this issue or doesn't want to run into this issue,
Before you screw the 2 top torques, place the lower black lip behind the metal slot at a 45° angle, top leaving towards you. Push top back making sure 2 springs in rear are in contact. Hold in place at top while you re screw torque screws. 
|
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Non oem steering wheel | zzdudaka | Exterior & Interior | 11 | 05-15-2015 11:23 PM |
| Steering wheel | jmmy | DIY Section (Do-It-Yourself) | 3 | 09-26-2010 08:28 AM |
| WTB: OEM Steering wheel | JSD-ZX | Wanted | 0 | 07-23-2010 02:21 AM |
| Steering wheel hub with SRS fix? | SE | Exterior & Interior | 3 | 04-05-2010 11:06 AM |
| Steering Wheel? | The BlueMax | Exterior & Interior | 1 | 02-02-2010 10:24 PM |
47Likes
Hybrid Mode
