The only "impact" I had was hitting a curb and getting two wheels off track. Also my home track of Sebring is very bumpy. The other thing, it seems the
|
|
LinkBack | Thread Tools | Display Modes |
08-02-2021, 04:34 AM | #106 (permalink) |
Base Member
Join Date: Feb 2017
Location: Florida
Posts: 68
Drives: 12 M6
Rep Power: 6776 |
The only "impact" I had was hitting a curb and getting two wheels off track.
Also my home track of Sebring is very bumpy. The other thing, it seems the Autometer sending unit seems larger than some other units that I see. I'm looking at getting an AN adapter and installing it on top of the oil cooler, or even running a line from there and chassis mounting it. I did find a thread where someone else cracked the port at that location, he did not mention what caused the damage. |
08-02-2021, 08:14 AM | #107 (permalink) |
A True Z Fanatic
Join Date: Mar 2011
Location: Austin, TX
Age: 43
Posts: 36,450
Drives: 11 Z34, 98 E36 M3
Rep Power: 2684440 |
I've heard of a few people cracking the port due to over torqueing the sensor.
This guy on the 350Z forum had a solution that might be worth checking out before replacing the upper oil pan. It's a common BMW solution. https://my350z.com/forum/2003-2009-n...imple-fix.html
__________________
2011 370Z 6MT Sport Gun Metallic | ARC | CJM | Ecutek | FI | Fujimura | R2C | SPL | Stillen | TWM | Z1 | ZSpeed | |
08-04-2021, 04:42 AM | #109 (permalink) |
Base Member
Join Date: Feb 2017
Location: Florida
Posts: 68
Drives: 12 M6
Rep Power: 6776 |
It is also interesting that in the first picture in this thread the T fitting is the exact one that I used, but pictures of the actual install show a different and much stronger looking brass T.
|
03-13-2022, 08:17 AM | #112 (permalink) | |
A True Z Fanatic
Join Date: Aug 2018
Location: Chicagoland
Age: 37
Posts: 5,261
Drives: A Garage Queen
Rep Power: 2684371 |
Quote:
https://www.amazon.com/Pressure-Sens.../dp/B08LQN61K6 |
|
12-06-2022, 11:38 AM | #115 (permalink) |
Track Member
Join Date: May 2021
Location: slovenia
Posts: 554
Drives: 370z pack
Rep Power: 125427 |
I don't wanna open a new thread, so I'll reuse this one to post a few questions before I get on to installing an oil cooler. All of the parts arrived so I just wanna make sure I got everything conceptualized as I should, so I have several questions (some of which are pretty simple and maybe stupid, but bear with me pls).
1. Does the oil cooler have a direction how it's supposed to be turned? I'm guessing it doesn't. I bought the thermostatic plate adapter. 2. The side with the rubber, I'm guessing goes toward the engine, correct? The other side is flat, so the oil filter should attach on that side, yes? 3. On the thermostatic plate, the black hex screw is probably factory sealing the thermostat, nothing to do there, correct? 4. Thermostat itself is now probably closed, as the temperature isn't hot. But when I look through it - I can see the path for oil is partially open. Is this by design? I thought it would be completely closed until a certain temperature, and open only then to let the flow get to the oil cooler. Do I misunderstand something here? 5. These fittings on the sandwich plate and the same fittings on the oil cooler - should I use teflon or threadlocker or any other stuff to make sure it's tight and doesn't leak? This is the pressure sensor and I just places the T-fitting on top of it to check threading. Here I have the following issue: 6. The thread on the sensor is for whatever reason, cone-shaped. It literally expands just a slightly bit going from top to bottom. It's barely visible, but you feel it the moment you start threading the T-fitting. Threads are 100% same width. Is this normal or is this a manufacturer's defect? I can imagine it being deliberate, so to have better thread engagement to get a super snug fit, but I'm worried the T-fitting might break if I thread it fully. I would sandpaper the bottom part of the threads so they fit easier, because it will be snug anyway, and I'd teflon or threadlock there. Thoughts? Last question is regarding wiring. I know just the basics about wiring so I'd like to reconfirm something that's probably very obvious.... This is the schematics I got with the pressure gauge Large pic: https://imgur.com/6QKmbk6 7. I want to have amber-amber lighting, which is described as ignoring the WHITE wire, and connecting only the ORANGE to the battery. BLACK and RED being the + and - wires, naturally. Am I right to assume that I need to tie both ORANGE and RED to the + terminal of the battery, BLACK to the ground and that's it? Wouldn't that inevitably drain the battery? I suspect I should connect it to something that turns on with the car.... Thank you! Last edited by filip00; 12-06-2022 at 11:41 AM. |
12-06-2022, 04:06 PM | #116 (permalink) |
Enthusiast Member
Join Date: Apr 2013
Location: Kimberley, BC, CANADA
Posts: 447
Drives: 13 370Z BS M6 Sport
Rep Power: 439 |
A few questions to start:
1. What brand/model of oil cooler? 2. What brand/model of thermostatic plate? 3. What brand/model of oil pressure gauge and sensor? The answers will be helpful to those who can assist you with the install. |
12-07-2022, 03:17 AM | #117 (permalink) | |
Track Member
Join Date: May 2021
Location: slovenia
Posts: 554
Drives: 370z pack
Rep Power: 125427 |
Quote:
Oil cooler: setrab, 25 row Pressure gauge and sensor: RSP gauges Sandwich plate (with thermostat) - mocal |
|
12-07-2022, 03:37 PM | #118 (permalink) | |
Enthusiast Member
Join Date: Apr 2013
Location: Kimberley, BC, CANADA
Posts: 447
Drives: 13 370Z BS M6 Sport
Rep Power: 439 |
Quote:
1. In terms of the installation of the thermostatic plate, you are correct. The side with the rubber o-ring should be mounted against either the upper oil pan or the factory oil cooler depending on the model year of the Z. (Earlier Z's were not equipped with the oil cooler). The oil filter will screw into the opposite side of the plate. Even with the plate installed, there should be enough space for the oil filter. 2. In terms of the fittings, I would recommend applying a small amount of Permatex high-temperature thread sealant (or an equivalent brand-name sealant) to the threads as opposed to using teflon or threadlocker. I've found that the Permatex sealant works well. That said, follow the manufacturers' instructions. If they say to use teflon, use it. 3. In terms of the sensor fittings, it's important to recognize that different thread types exist. The most common ones are NPT and BSPT. They have different thread pitches and are not interchangeable. The port in the engine block where the factory sensor is mounted is a BSPT thread type. You will need to determine the thread type of your T-fitting as well as the aftermarket sensor. It is important that the thread types match. Adaptors are available that allow "bridging" between fittings of different thread types. 4. In terms of the wiring, I would recommend running the sensor wires through the large rubber grommet located in the firewall behind the battery. Afterwards, make sure to apply some silicone or RTV sealant around the opening that may need to be created to feed the wires through. Once inside, you can run the wires to the gauge, wherever you decide to place it. In terms of the gauge wires, I'd recommend running them to the driver's footwell where you'll find a fuse box. Connect the load wire from the gauge to an "add-a-circuit" (or fuse tap) of suitable amperage that you can install in the fuse box. You can select what circuit you want to tap into. The ground wire from the gauge can be connected to a nearby grounding surface, such as a screw or bolt mounted into metal. Make sure to disconnect the battery before proceeding with the wiring. Trust this helps! |
|
12-08-2022, 01:58 AM | #119 (permalink) |
Track Member
Join Date: May 2021
Location: slovenia
Posts: 554
Drives: 370z pack
Rep Power: 125427 |
Thanks for the help, it does help and confirms most of what I suspected so far.
Regarding threadlock - there is nothing in the instructions that would suggest using any teflon nor threadlock, just "lubricant". (https://cdn.z1motorsports.com/upload...tallManual.pdf) I will look a bit more what do other installation manuals suggest, I'm guessing a bit of teflon can't hurt. I'll see if I can get permatex instead too. Regarding threads - Well, the more you know I didn't know this about the threads and now that I'm looking into it - definitely the threads on the sensor and the T-fitting are different. I also found this thread where there is more information: Oil Pressure Sensor threads size I'll see what adapter I need and I'll get those too. Thanks for this help! And lastly, regarding wiring - no problem in pulling wires from the battery to the inside, I already located all the holes in the firewall and how/where to do it. I'm more confused by the instructions identifying 3 wires I need to connect (+, -, orange), and it tells me that orange needs to go to the battery. This part confuses me. I guess Orange needs to either go to the fuse or somewhere else? Please help Thanks! |
12-08-2022, 09:46 AM | #120 (permalink) |
Enthusiast Member
Join Date: Apr 2013
Location: Kimberley, BC, CANADA
Posts: 447
Drives: 13 370Z BS M6 Sport
Rep Power: 439 |
Can you post or provide a link to the instructions? I suspect that the orange wire may control the illumination of the gauge ... however, I would need to see the instructions to confirm.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
370 oil pressure and AEM gauge | binto100 | Nissan 370Z General Discussions | 0 | 05-26-2010 07:04 PM |
Oil Pressure Gauge | jpit | Engine & Drivetrain | 3 | 03-16-2010 09:33 PM |
Oil Pressure Gauge | jpit | Exterior & Interior | 6 | 03-07-2010 08:36 PM |
Oil Pressure Gauge | 37Z | Exterior & Interior | 0 | 06-14-2009 09:21 PM |
What happened to the tire pressure gauge and speedo in the middle gauge cluster? | rbratton | Nissan 370Z General Discussions | 33 | 01-24-2009 10:28 PM |