370Z 40th Anniversary: Zex NoS Installtion

One_Quick_Z

Cool glad you like your set up!


I went with the same on my old 350Z, Once you get some more track time and new tires get the 100 shot jets in and a tune and you will be breaking into the 11's



DAN

__________________
-My BRZ with exhaust will decimate all if we overnight parts from Japan-

10 Civic EX Sedan- Current Daily

Gunzero

This is awesome

__________________

spdn370z

Excited to hear that... I want to see the 11's!

__________________
2010 370Z 40th Anniversary Edition, Zex Nitrous (75 Shot), Injen Intake, Berk HFC and Stillen cat back exhaust.

tyler20c

What are your other mods? also, the nitrous didn't quite cut a second off your time most likely more like a half second or less. Your 60 foot was 2.4 on the n/a run and 2.0 on the nitrous run, which isn't effected by the nitrous. Great results on the nitrous run though! I cant wait to see what mine will do when my nitrous finally is finished getting installed.

Nismo221

well i see in his pic he has ingen long tube intake.

__________________
Stillen Gen 3, Motordyne M370 Intake Manifold,
25 row oil cooler, Z1 test pipes, Greddy Ti-C 70mm dual exhaust, 15mm front/20mm rear spacers, RE-11's, V1 detector, LED interior lights, LED tag lights, Password JDM CF engine and radiator cooling covers.

spdn370z

Thanks for the feedback guys. I do need to work on my times... practice makes perfect. Will say I was trying to go for a clean install that hid the components.

I installed the heater and purge kit. Will post pics soon.

__________________
2010 370Z 40th Anniversary Edition, Zex Nitrous (75 Shot), Injen Intake, Berk HFC and Stillen cat back exhaust.

red6spd

Nice, would really like to see what he can pull of on a fully bolted and tuned Z

__________________
2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness.
???Whp ???WTQ (Will find out come spring time)

JC671

Ordering my kit today....

Was the install hard? I want to attempt to do this with my uncle who is a great mechanic but scared to do it since its my first install with Nitrous...

Big J

Nitrous is not a difficult thing, don't let all the negative hype(usually from pople who have never used it) scare you away.

JC671

Ordered my entire kit on the 6th of April Just waiting for it to come in with my purge kit,


I'll post results....

Big J

From where? Why is it taking so long to come in?

JC671

To the OP, I pmed you about some things.. I've had my kit in but installing later this weekend.. I also got the nitrous purge kit.. My question is I plan to run the 100 shot jets but it says I need to retard timing by 4 degrees??? How did you do that or how do I do it?

One_Quick_Z

Yes you need to take a few deg of timing off and also run 1 step colder plugs If you are going to run a 100-shot personally I would also get an UpRev Tune to make sure everything is running how it should be..... thats what I did on my old 06 350Z



DAN

__________________
-My BRZ with exhaust will decimate all if we overnight parts from Japan-

10 Civic EX Sedan- Current Daily

JC671

Thanks for the reply Dan, but how do you exactly take timing off on the 370z? I don't have the uprev or another piggy back to do it with. How can I adjust without it? Please elaborate.. I plan on running the Zex plugs when they come in but any particular plug I can get before that arrives? I plan on running two steps colder just in case..

HoneyBadger

Good looking setup. I ran a Zex kit on my 2000 Maxima back in the day.

__________________
HoneyBadger don't care.