|
The passenger side just pulled apart. I believe a very small screwdriver, or similar, is needed to slide along the blue connector. Just don't drop the tool in the door.
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
06-20-2016, 01:53 PM
|
#30 (permalink) |
|
Base Member
Join Date: Mar 2016
Location: Fort Lauderdale
Posts: 73
Drives: '16 370z NISMO
Rep Power: 10  |
The passenger side just pulled apart. I believe a very small screwdriver, or similar, is needed to slide along the blue connector. Just don't drop the tool in the door. It really is a PITA to uncouple if they are tightly fitted. I ended up marking the wires (they were both solid black) and spliced them back together. It was not what I intended, but I spent too much time on that connector.
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Door Panel Removal & Door Speaker Size | jikhead | DIY Section (Do-It-Yourself) | 46 | 07-16-2016 10:04 PM |
| Door handle rattles from outside...anyone? | zaust | Exterior & Interior | 1 | 02-27-2012 03:21 PM |
| 370z door handle swap? | ThoriumHotdog | Exterior & Interior | 11 | 11-03-2010 10:44 PM |
| EVO-R door handle review by SIMOTA1 | simota1 | Exterior & Interior | 12 | 09-09-2010 09:56 PM |
| tried to remove door handle...Fail | Soon | DIY Section (Do-It-Yourself) | 4 | 08-02-2010 04:03 PM |
27Likes
Threaded Mode
