DIY-Door handle removal

LukasC · 10-14-2012, 08:58 PM

Quote:

Originally Posted by Grindkiezer

When it says to "pop out the two clips holding the black wire" do you mean take out the two small screws that are on the actual handle? one of those screws on my handles are stripped so there really isn't any way that I can take them out.

Someone please help me, I have an appointment to get these painted on Friday but I can't seem to disconnect the black wire.

I found the two clips on the inside of the door frame, but no matter how hard I pull on them the first clip won't come free. How do I get it loose?

You can unscrew one of the screws and swivel that plate and then take that black wire out that has your unlock button then take the actual button off the black wire and get it painted too. Is that what ur talking about?

Grindkiezer · 10-14-2012, 09:51 PM

yeah that was the part that I was talking about, but I figured it out already. Thanks anyways

cooltoy · 10-15-2012, 04:12 PM

Quote:

Originally Posted by pfdaxe

Here ya go:

EVO-R INC. Nissan 370Z Z34 Carbon Fiber Exterior Door Handle Covers

What a bout painting these body colour and then attaching them? Instead of removing the handles?

Vichtz · 10-15-2012, 04:20 PM

could do it i'm sure, but talk about a waste of money and carbon fiber...

Volk Z · 01-19-2013, 05:20 PM

I noticed a ton of people saying they had issues with removing the drivers side handle due to the hard to reach screw... Solution is don't remove that screw! Remove the hex head screw on the door.

So in short 2 bolts for both handles drivers side remove hex head screw on door that is the only difference...

pbhakta · 03-02-2013, 04:14 PM

I'm at the point where I'm needing to disconnect the blue harness. Do I need to pull the entire harness free from the door frame first before disconnecting? I can barely get my hands in there and just wondering if it can come off the frame first so i can unplug the harness easier.

Sent from my PG86100 using Tapatalk 2

pbhakta · 03-02-2013, 04:56 PM

Well after messing with it for some time, I was able to get it loose from the frame. However disconnecting the harness is another issue. Having lots of trouble trying to unplug. I tried to remove the screws,that hold the back plate for the electronic push button lock, but basically started to strip them as an alternate to disconnecting the harness. Feel like I'm destroying my thumb trying to push the square tab down to release the harness. Anyone have any tips or tricks to release?

Sent from my PG86100 using Tapatalk 2

Trips · 03-02-2013, 07:27 PM

Quote:

Originally Posted by pbhakta

Well after messing with it for some time, I was able to get it loose from the frame. However disconnecting the harness is another issue. Having lots of trouble trying to unplug. I tried to remove the screws,that hold the back plate for the electronic push button lock, but basically started to strip them as an alternate to disconnecting the harness. Feel like I'm destroying my thumb trying to push the square tab down to release the harness. Anyone have any tips or tricks to release?

Sent from my PG86100 using Tapatalk 2

Try using a pair of small vise-grips either needle-nose or the standard type

The screws have locktite unfortunate.

pbhakta · 03-02-2013, 09:37 PM

Quote:

Originally Posted by Triple's

Try using a pair of small vise-grips either needle-nose or the standard type

The screws have locktite unfortunate.

Thanks for the suggestion. After messing with it for a while I was able to release the harness on the driver side. The thought of going through the same on the passenger side was frustrating. I luckily was able to call my wife out who was able to put her smaller hands in there and release the harness and made short work of the passenger side.

Pheonix · 06-04-2013, 03:27 AM

Hey guys/girls

I need to know the name and size of the sleeve that these two 4m screws sit in. I was doing this last night and had to call a buddy over cuz these two screws were being particularly nasty on the driver's side. We ended up stripping one, drill bitting and extracting them...long story short, one was salvageable, one was not...I know from these threads that the screws are 4m and should be carried at a Home Depot or similar store, but nobody can advise what the sleeve that the screw sits in is called, or where I can find one.

I'd love an answer ASAP, as I'm having these painted in the AM and I'd love to reinstall right away.

Thanks!!

MarlinZ · 09-06-2013, 04:22 PM

Does anybody know the size of the little screws?

Volk Z · 09-06-2013, 08:28 PM

Quote:

Originally Posted by MarlinZ

Does anybody know the size of the little screws?

I belive they were 4MM X 1/4 inch. Just go to the hardware store you can get stainless for half the price and not have to wait for Nissan to waste. Hours of your life finding out what screws they are and 1 week to order/receive.

If anyone stripped them like I did I took a hacksaw and made a straight line across then simply used a flathead and they came out.

HockeyAnimal1 · 12-11-2013, 08:48 AM

I think I got a little carried away with my door handle paint project!

I also used tape rolled up (sticky side out) to help ensure I didn't drop the screws inside the door! Worked Great!

equalme · 01-03-2014, 11:59 PM

Yeah those two little screws were stupid. It has blue loctite on the threads and the head strips with barely any force.

equalme · 01-07-2014, 07:50 PM

Quote:

Originally Posted by Volk Z

I belive they were 4MM X 1/4 inch. Just go to the hardware store you can get stainless for half the price and not have to wait for Nissan to waste. Hours of your life finding out what screws they are and 1 week to order/receive.

If anyone stripped them like I did I took a hacksaw and made a straight line across then simply used a flathead and they came out.

They are #6 screws. I happened to first purchase the #4, too small, then went back and got #8, too big, and finally got the #6 - perfect. I got the stainless steel flat screws with washers.

#6-1/2" is the what I ended up using.

10-14-2012, 09:51 PM	#62 (permalink)
Grindkiezer Track Member Join Date: Sep 2012 Location: San Diego Posts: 824 Drives: A Car Rep Power: 14	yeah that was the part that I was talking about, but I figured it out already. Thanks anyways __________________ Z

10-15-2012, 04:20 PM	#64 (permalink)
Vichtz Track Member Join Date: May 2012 Location: Unknown Posts: 538 Drives: PG 09 Nissan 370z Rep Power: 14	could do it i'm sure, but talk about a waste of money and carbon fiber... __________________ очень быстро ... Stillen Gen 3 CAI// Stillen CBE// B&M SS with PWJDM Shift Knob// Custom OCC// Drilled/Slotted Rotors//Halo/painted Headlights// Under-hood dress up

01-19-2013, 05:20 PM	#65 (permalink)
Volk Z A True Z Fanatic Join Date: Aug 2011 Location: Laguna Beach, CA Posts: 2,214 Drives: Nismo Z Rep Power: 3066	I noticed a ton of people saying they had issues with removing the drivers side handle due to the hard to reach screw... Solution is don't remove that screw! Remove the hex head screw on the door. So in short 2 bolts for both handles drivers side remove hex head screw on door that is the only difference... BeemaaZ likes this. __________________ AMUSE * TOMEI * STILLEN * CRAFTSQUARE RECARO * 3M * TOP SECRET * SLICKCARBON

03-02-2013, 04:56 PM	#67 (permalink)
pbhakta Enthusiast Member Join Date: Dec 2011 Location: Kansas City Posts: 333 Drives: 11 GM 370z T/S 6MT Rep Power: 13	Well after messing with it for some time, I was able to get it loose from the frame. However disconnecting the harness is another issue. Having lots of trouble trying to unplug. I tried to remove the screws,that hold the back plate for the electronic push button lock, but basically started to strip them as an alternate to disconnecting the harness. Feel like I'm destroying my thumb trying to push the square tab down to release the harness. Anyone have any tips or tricks to release? Sent from my PG86100 using Tapatalk 2 __________________ 2011 6MT 370Z Gun Metallic :: Stillen G3 CAI :: Swift Springs :: EvoR :: JWM LEDs :: TommyKaira :: Forgestar F14 :: Motordyne Shockwave))) E370 :: CS Spec-Me Lip :: AeroJacket Last edited by pbhakta; 03-02-2013 at 06:43 PM.

12-11-2013, 08:48 AM	#73 (permalink)
HockeyAnimal1 Base Member Join Date: Aug 2013 Location: Milwaukee, WI Posts: 11 Drives: 2012 370Z NISMO Rep Power: 12	I think I got a little carried away with my door handle paint project! I also used tape rolled up (sticky side out) to help ensure I didn't drop the screws inside the door! Worked Great! eastwest2300, BeemaaZ, NISMO IX and 2 others like this.

09-06-2013, 04:22 PM	#71 (permalink)
MarlinZ Enthusiast Member Join Date: May 2013 Location: Ukiah,Ca Posts: 300 Drives: '10 370Z PG M6 Rep Power: 12	Does anybody know the size of the little screws?

01-03-2014, 11:59 PM	#74 (permalink)
equalme Track Member Join Date: Feb 2013 Location: Kansas City Posts: 656 Drives: RCF Rep Power: 13	Yeah those two little screws were stupid. It has blue loctite on the threads and the head strips with barely any force.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Door Panel Removal & Door Speaker Size	jikhead	DIY Section (Do-It-Yourself)	46	07-16-2016 11:04 PM
Door handle rattles from outside...anyone?	zaust	Exterior & Interior	1	02-27-2012 04:21 PM
370z door handle swap?	ThoriumHotdog	Exterior & Interior	11	11-03-2010 11:44 PM
EVO-R door handle review by SIMOTA1	simota1	Exterior & Interior	12	09-09-2010 10:56 PM
tried to remove door handle...Fail	Soon	DIY Section (Do-It-Yourself)	4	08-02-2010 05:03 PM