DIY: EVO-R Foglight Install

LukasC

Ok man heres what you are going to have to do. You will need some wire like this... ImageUploadedByTapatalk1347892665.504386.jpg then u willhave to splice off that clip to extend it about 3-4 feet to give u play roomImageUploadedByTapatalk1347892745.773805.jpg i wrapped it in a plastic electrical tube to insulate it from water then u have to take off ur inside liner in ur trunk and remove one of ur tail lights ImageUploadedByTapatalk1347892830.122332.jpgthen run the wire and tap into the harness wiring of the tail light i chose the red one for it to b on when the tail lights are on. Idr which wire it is for the brake lights but use a connector that can connect ur new wire to the tail lights like i have it and then cut excess off and seal it up with electrical tape and voila ur done ImageUploadedByTapatalk1347892866.657435.jpg



Edit heres the wires and what they are for

Hopefully that will help u

Oh yeah u might want to take it off ur car first!! Its reallllyyyy easy!! U just need a flat head to pop the little plastic push pins out and the a socket i think idr to take off the two bolts that attach the fog light to ur car its easy it takes u probably 2 minutes to do. Then once its off splice that connector etc