Nissan 370Z Forum - stock cat has claim another victim

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)

- - stock cat has claim another victim (http://www.the370z.com/diy-section-do-yourself/24611-stock-cat-has-claim-another-victim.html)

Trips

09-12-2010 11:17 PM

Quote:

Originally Posted by ncheung85 (Post 718384)

Update:

The PB blaster is only good if you haven't stripped the bolt.

Thanks to the people from Amplified Motorsports. I got my hfc on.

Great to Hear. :tup:

tjlazer

09-28-2010 12:37 PM

I had the same problem! I had to cut the cat in half and pry it off/use an air chisel to break ther bolt! NOT FUN!!!

fuct	09-28-2010 03:05 PM

Go from inside the engine guys!!!!!! Long extension!!!!!!!

fuct	09-28-2010 03:06 PM

Quote:

Originally Posted by tjlazer (Post 741015)

i had the same problem! I had to cut the cat in half and pry it off/use an air chisel to break ther bolt! Not fun!!!

ill remember this when your in need of some factory cats;)

tjlazer

09-28-2010 03:07 PM

Quote:

Originally Posted by fuct (Post 741247)

ill remember this when your in need of some factory cats;)

Never. HFC's FTMFW!

ClemsonWill

09-28-2010 03:09 PM

These "Demon Bolt" threads have me really second guessing the HFCs.

tjlazer

09-28-2010 03:36 PM

Quote:

Originally Posted by ClemsonWill (Post 741253)

These "Demon Bolt" threads have me really second guessing the HFCs.

No need to stress my Z friend. All you can do it TRY and if all fails you will have to do what you have to, to remove the cats! (or limp your Z to a shop!) Get a 6 POINT SOCKET set and a long 1/2 extension and breaker bar for the top bolts that you access from the top of the engine bay (you remove the air intakes for this btw). Use lots of PB Blaster and if you can spray the bolts the few days before hand. Oh and do not think you can get this done in a couple hours. Reserve the WHOLE day just in case the demon pays you a visit!!! have a hack saw and air chisel handy along with a case of beer. :bowrofl: :ughdance:

All times are GMT -5. The time now is 11:06 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page