painting engine cover/strut brace

destinyZ · 08-23-2010, 09:12 AM

I was pretty bored and wanted to see how it would look. I think it turned out really well. If no has done this yet then here some pics and instructoins. Its pretty easy just time consuming:

Brace: 14MM
Cover: 10MM

Picture 1: before shot.

Picture 2: Remove bolts on each side of strut brace.

Picture 3: remove rumber seal at the back of engine bay. it just pops off

picture 4: where my hand was in pic 4, there is a plastice piece behind it that pops off. be carefull not to break anything, its only plastic.

Picture 5: remove the 2 bolts under the plastic piece that you just removed.

Picture 8: Before you ever do any painting, you should clean ALL surfaces first. tape off or cover everything you dont intend to paint. i used grey tape and masking tape. both of them stuck very poorly to the plastic. so if you have a better method use it.
to cover the rubber pieces inside where the bolts that mount the the cover down, cut out a piece of tape the size of a nickel. just get a nickel, put tape on it and cut. i used the grey tape. After that paint the desired color.

Picture 14: sand down the brace, prime then paint. see, not hard at all just takes a while because of the dry of the paint.

Last coupld of pics are just the finnished product

EASY DIY enjoy.

P.S. how do you make the pictures pop up big without it beging an attachment??

tweba09 · 08-23-2010, 12:50 PM

Looks good. I plan to do this except pearl white to match the exterior of the car.....The only thing I have thought would be a problem is the engine temperatures cause the paid to fade/peel....

destinyZ · 08-23-2010, 03:09 PM

Quote:

Originally Posted by tweba09

Looks good. I plan to do this except pearl white to match the exterior of the car.....The only thing I have thought would be a problem is the engine temperatures cause the paid to fade/peel....

thank you. someone asked me y i wasnt doing white. it just that i didnt want to have to clean grease off of white. i already have to maintain a white car. I was thinking the same thing about the temp issue. but is still did it hoping it doesnt become an issue.

Jamaica · 08-23-2010, 03:59 PM

Good write up!

kenchan · 08-23-2010, 04:26 PM

Quote:

Originally Posted by tweba09

Looks good. I plan to do this except pearl white to match the exterior of the car.....The only thing I have thought would be a problem is the engine temperatures cause the paid to fade/peel....

ive had great luck with duplicolor engine enamel paint.

no peeling, cracking, and they are extremely strong to weather too.

destinyZ · 08-23-2010, 06:32 PM

Quote:

Originally Posted by jamaica951

Good write up!

Thank you

vividracing · 08-23-2010, 06:48 PM

Looks good, excellent write up!

destinyZ · 08-23-2010, 10:08 PM

Quote:

Originally Posted by vividracing

Looks good, excellent write up!

Thank you.

i appriciate the compliments.

Mike · 08-23-2010, 11:38 PM

looks good!

ducky · 10-30-2010, 04:40 AM

What type of paint did u use to paint the engine bay and strut brace? Nicely done

destinyZ · 10-30-2010, 04:58 AM

I used Krylon Fusion. Before painting the strut I primed it. I have no bubbling or peeling of the paint

ThoriumHotdog · 10-30-2010, 06:31 AM

Looks good. I like the blue on white.

gromano · 10-17-2011, 02:43 AM

looks nice!!!

but how much did you have to 'sand down the brace' exactly???

destinyZ · 10-17-2011, 11:40 AM

Quote:

Originally Posted by gromano

looks nice!!!

but how much did you have to 'sand down the brace' exactly???

Use a rough grade of sand paper to get passed the factory paint and it shouldn't take too long. use a smaller grit sand paper to smooth out the surface before priming.

dennis26 · 10-22-2011, 09:31 PM

Looks great. Really thinking about doing this to mine. Good write up.

08-23-2010, 06:48 PM	#7 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 38 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 39	Looks good, excellent write up! __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

08-23-2010, 11:38 PM	#9 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	looks good! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What do you think??? Powdercoated Stillen G3 and Strut Brace	Z1804	Intake/Exhaust	46	07-27-2010 07:39 AM
WTB: OEM Nismo Strut Tower Brace	'10Anamoly	Wanted	0	07-13-2010 09:30 AM
Zele: Strut Tower Brace for the 370Z Z34 01.01.09	AK370Z	Nissan 370Z General Discussions	27	01-19-2009 09:32 AM

08-23-2010, 12:50 PM	#2 (permalink)
tweba09 Base Member Join Date: May 2010 Location: Tampa, FL Posts: 32 Drives: 09 Sport/Touring Z Rep Power: 15	Looks good. I plan to do this except pearl white to match the exterior of the car.....The only thing I have thought would be a problem is the engine temperatures cause the paid to fade/peel....

08-23-2010, 03:59 PM	#4 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	Good write up!

10-30-2010, 04:40 AM	#10 (permalink)
ducky Enthusiast Member Join Date: Aug 2009 Location: SinCity Posts: 437 Drives: 370z and s2000 Rep Power: 16	What type of paint did u use to paint the engine bay and strut brace? Nicely done

10-30-2010, 04:58 AM	#11 (permalink)
destinyZ Enthusiast Member Join Date: Apr 2010 Location: Guam, USA Age: 36 Posts: 415 Drives: FROM INDIANA Rep Power: 15	I used Krylon Fusion. Before painting the strut I primed it. I have no bubbling or peeling of the paint

10-30-2010, 06:31 AM	#12 (permalink)
ThoriumHotdog A True Z Fanatic Join Date: Sep 2010 Location: TX Posts: 1,104 Drives: Turbo CRX si Rep Power: 17	Looks good. I like the blue on white.

10-17-2011, 02:43 AM	#13 (permalink)
gromano Enthusiast Member Join Date: Jul 2009 Location: Brisbane (South) Posts: 308 Drives: 09 Nissan 370Z- Blue Rep Power: 16	looks nice!!! but how much did you have to 'sand down the brace' exactly???

10-22-2011, 09:31 PM	#15 (permalink)
dennis26 Enthusiast Member Join Date: Aug 2011 Location: Alabama Posts: 314 Drives: 10 370z roadster Rep Power: 14	Looks great. Really thinking about doing this to mine. Good write up.