DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)

Cinqu · 12-25-2012, 03:57 PM

So.... I'm new and all but...how does one replace/clean the filters on this set-up?

pfdaxe · 12-25-2012, 04:01 PM

Quote:

Originally Posted by Cinqu

So.... I'm new and all but...how does one replace/clean the filters on this set-up?

Remove the front bumper to clean filters

AK370Z · 01-04-2013, 04:56 AM

You're welcome

. I am glad I could post it for you guys so that you can get useful information before tackling this install.

I am updating this info: I should mention here that for 2013 models, there are electrical wiring that's attached to front bumper. Please use extreme caution when you take it off. If anyone with 2013 Z takes off their front bumper, please send me some pics so that I can update it. (thank you xTETOVABOYx)

AK370Z · 01-09-2013, 03:19 AM

Here are some pictures of 2013+ front bumper led wiring: Huge thanks to xTETOVABOYx for providing me with the pics. Thank you

Passenger Side Connection On picture #1

Passenger Side LED picture #2

LED on Driver Side , Shows how long wire is picture #3

Actual led of the driver side picture #4

InsanO · 01-09-2013, 04:36 AM

AK, great thread and pics. Makes installing this thing look possible to even the most amateur of enthusiasts

Few questions...

I've read elsewhere (links below) that following installation of this Stillen G3 system, a tune (preferably uprev) is essential as the air / fuel ratios are wayyy out of whack. Thoughts?

Intake, Header, HFC, CBE = Too Lean?

Also, if you've added/adding an aftermarket CBE and/or HFCs (such as FI), the power benefits of this CAI are somewhat minimal if any...

Intake, Header, HFC, CBE = Too Lean?

Perhaps drop-ins are the way to go for those who have aftermarket CBEs / HFCs??

xTETOVABOYx · 01-09-2013, 04:51 AM

i hope this helps most of you with the 2013 bumper ! , loving the Gen 3's

))

Kabestro · 01-12-2013, 02:27 PM

Quote:

Originally Posted by xTETOVABOYx

i hope this helps most of you with the 2013 bumper ! , loving the Gen 3's

))

Thanks man, that was my main concern if the Gen 3 fit the 13 model year. Cause not even in the stillen page is it updated for the 13 model. Quick question, do the wires for the LEDs unplug or do you have to take the whole LEDs apart from the bumper?

songbong · 01-12-2013, 05:01 PM

awesomeawesomeawesome i cant wait to get the stillen g3s now

xxAGAVExx · 01-13-2013, 03:55 PM

Thanks AK, just installed them this weekend. Never would have tried it without your DIY.

xTETOVABOYx · 01-15-2013, 02:35 AM

Quote:

Originally Posted by Kabestro

Thanks man, that was my main concern if the Gen 3 fit the 13 model year. Cause not even in the stillen page is it updated for the 13 model. Quick question, do the wires for the LEDs unplug or do you have to take the whole LEDs apart from the bumper?

they unplug, really simple

Refer to picture one. The plug is right under the reservoir on the passenger side, Refer to picture 3 for drivers side. the plug is right on the led as you can see it from a top view

zpower86 · 01-26-2013, 06:59 PM

Quote:

Originally Posted by rhd

Thanks AK for a great DIY!

Rockin the G3...

Where did you get that filler foam stuff?

Kabestro · 01-26-2013, 09:32 PM

Got mine, this thing is amazing

Kabestro · 01-26-2013, 09:37 PM

Here are two more photos of the LEDS to compliment xTETOVABOYx pics. Thanks for the DIY.

BlueMug · 02-01-2013, 12:24 AM

I noticed one post mentioned the CEL light came on. Shortly after my install I had the service engine soon light on... throwing code P0300... reset the and checked the MAFs and clamps... all good. The SES light came right back on. Anyone else have this issue?

Gibby1113 · 02-02-2013, 12:58 PM

I was noticing on the stillen website that the GIII's that are made for the G37 come with some sort of splash gaurds for the filters. I was wondering if the GII's for our Z's have it as well? Only reason I am asking is because the stillen website does not mention it coming with the intakes, I haven't seen anyone installing them on their Z's, and I thought the parts for the G37 and 370Z were interchangeable for the most part. I really want these but idk if I should due to the fact that water can get them. The gains are ridiculous and it just looks awesome when you open up the hood IMO. Any help is appreciated, thanks!

12-25-2012, 03:57 PM	#166 (permalink)
Cinqu Base Member Join Date: Dec 2012 Location: NorCal Posts: 2 Drives: 2010 370z Touring 6M Rep Power: 12	So whats up Doc? So.... I'm new and all but...how does one replace/clean the filters on this set-up?

01-04-2013, 04:56 AM	#168 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	You're welcome . I am glad I could post it for you guys so that you can get useful information before tackling this install. I am updating this info: I should mention here that for 2013 models, there are electrical wiring that's attached to front bumper. Please use extreme caution when you take it off. If anyone with 2013 Z takes off their front bumper, please send me some pics so that I can update it. (thank you xTETOVABOYx) ZMan8, DEpointfive0 and xTETOVABOYx like this. __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

01-09-2013, 03:19 AM	#169 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	Post updated with pics Here are some pictures of 2013+ front bumper led wiring: Huge thanks to xTETOVABOYx for providing me with the pics. Thank you Passenger Side Connection On picture #1 Passenger Side LED picture #2 LED on Driver Side , Shows how long wire is picture #3 Actual led of the driver side picture #4 __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

01-09-2013, 04:51 AM	#171 (permalink)
xTETOVABOYx Base Member Join Date: Sep 2012 Location: Florida Posts: 63 Drives: 13 Nissan 370Z PW M6 Rep Power: 13	i hope this helps most of you with the 2013 bumper ! , loving the Gen 3's )) __________________ 13' 370z \| 5% tint \| Stillen Gen3 CAI \| H&R Springs \|

01-13-2013, 03:55 PM	#174 (permalink)
xxAGAVExx A True Z Fanatic Join Date: Nov 2012 Location: Tampa Posts: 1,036 Drives: 09 370Z BLK M6 Rep Power: 53924	Thanks AK, just installed them this weekend. Never would have tried it without your DIY. AK370Z likes this. __________________ l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD \| Lots of SPL and Carbon Fiber \|

01-09-2013, 04:36 AM	#170 (permalink)
InsanO Base Member Join Date: Nov 2011 Location: Australia Posts: 45 Drives: 2011 Nissan 370Z Rep Power: 13	AK, great thread and pics. Makes installing this thing look possible to even the most amateur of enthusiasts Few questions... I've read elsewhere (links below) that following installation of this Stillen G3 system, a tune (preferably uprev) is essential as the air / fuel ratios are wayyy out of whack. Thoughts? Intake, Header, HFC, CBE = Too Lean? Also, if you've added/adding an aftermarket CBE and/or HFCs (such as FI), the power benefits of this CAI are somewhat minimal if any... Intake, Header, HFC, CBE = Too Lean? Perhaps drop-ins are the way to go for those who have aftermarket CBEs / HFCs??

01-12-2013, 05:01 PM	#173 (permalink)
songbong Base Member Join Date: Aug 2012 Location: houston Posts: 235 Drives: 2012 White 370z Rep Power: 13	awesomeawesomeawesome i cant wait to get the stillen g3s now

02-01-2013, 12:24 AM	#179 (permalink)
BlueMug Base Member Join Date: Nov 2012 Location: NY Posts: 3 Drives: 09 370Z CS M6 Rep Power: 12	I noticed one post mentioned the CEL light came on. Shortly after my install I had the service engine soon light on... throwing code P0300... reset the and checked the MAFs and clamps... all good. The SES light came right back on. Anyone else have this issue?

02-02-2013, 12:58 PM	#180 (permalink)
Gibby1113 Enthusiast Member Join Date: Nov 2012 Location: On open empty highways Posts: 366 Drives: 40th anniversary Rep Power: 12	I was noticing on the stillen website that the GIII's that are made for the G37 come with some sort of splash gaurds for the filters. I was wondering if the GII's for our Z's have it as well? Only reason I am asking is because the stillen website does not mention it coming with the intakes, I haven't seen anyone installing them on their Z's, and I thought the parts for the G37 and 370Z were interchangeable for the most part. I really want these but idk if I should due to the fact that water can get them. The gains are ridiculous and it just looks awesome when you open up the hood IMO. Any help is appreciated, thanks! __________________ 40th anniversary #450/1000 \| Takeda Attack CAI \| Ark DTS exhaust \| to be continued...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujimura cf Rear diffuser installed! (with pics)( AK370Z)	AK370Z	Exterior & Interior	73	04-24-2016 05:47 PM
Finally Got my exhaust! HKS Hi-Power Ti Exhaust (many Pics, Video inside AK370Z)	AK370Z	Intake/Exhaust	102	05-11-2013 02:32 PM
Finally Fully Detailed My 370Z with Porter Cable (AK370Z) 90+ pics inside	AK370Z	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	24	06-11-2011 09:48 PM
finally amuse stti extra exhaust arrived + lots of pics	zuperman 370	Intake/Exhaust	22	03-16-2011 01:25 AM
Installed my Stillen G3s. lots of pics and a short review	ssqpolo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	45	09-23-2009 04:20 PM