DIY: SPL Parts Rear Camber Arms Install

M.Bonanni · 05-27-2011, 05:41 PM

Quote:

Originally Posted by czheng51

Ok just found it (:
Thanks!

Ive also been told that the SPC toe bolt will not fit so i would have to drill the hole bigger? Is that true?

Yep. The SPC Toe bolts are basically the same as stock with a more aggressive cam lobe washer. To allow for the extra adjustment the mounting hole must be elongated to allow for full range.

czheng51 · 05-27-2011, 09:56 PM

Thank you

Vapiano · 07-15-2011, 09:08 PM

I will be adding Swift Spec R springs in the next few weeks, what determines whether or not you need to use the toe bolts?

M.Bonanni · 07-16-2011, 05:19 PM

Quote:

Originally Posted by Vapiano

I will be adding Swift Spec R springs in the next few weeks, what determines whether or not you need to use the toe bolts?

You should be fine. Usually those who lower their car quite a bit are the ones who end up needing the toe bolts.

Daishi9000 · 07-19-2011, 10:54 PM

I will also add swift spec r springs, will i need to add any cam arms to the front?

Vapiano · 07-19-2011, 10:57 PM

Quote:

Originally Posted by M.Bonanni

You should be fine. Usually those who lower their car quite a bit are the ones who end up needing the toe bolts.

Thank you.

RedBullRR · 08-08-2011, 07:09 AM

I could not find a DIY for this mod, and went ahead and started the install. I put the rear camber arms in with no problems. However when installing the Toe Bolt and enlarging the hole I made the hole larger for the toe bolt that goes were the camber arm goes and not the spring bucket.

Below is a DIY for the 350Z that states this goes were the spring bucket goes.
http://www.batit.com/forumpics/spctoeboltinstall.pdf

My questions... Obv I have to remove those bolts now and place the stock ones back on. Did I **** up my cars toe by making those holes bigger?

M.Bonanni · 08-08-2011, 10:49 AM

If the SPC toe bolts fit in that location I would keep them there and buy another set for the correct location.

RedBullRR · 08-08-2011, 11:40 AM

^ Can't I just put the stock toe bolt and put the SPC in the correct location?

Or can they dial in the Toe thru that spot?

M.Bonanni · 08-08-2011, 12:34 PM

Quote:

Originally Posted by RedBullRR

^ Can't I just put the stock toe bolt and put the SPC in the correct location?

Or can they dial in the Toe thru that spot?

You probably can put the stock bolt back in but I don't think you will be able to get your camber back to perfect since the smaller cam lobe will be pretty much useless with the larger slot. If you plan on tracking it, your camber may even change due to the high g-loads as it slips back and forth in the oversized slot. You really need to have the correct sizes cam lobe in there to retain full functionality. That being said, if you put the stock bolts back in, it won't harm anything or cause damage. For the $30 though I would definitely buy another set for the toe settings. What you did is just basically given yourself even more range of adjustment on camber instead of toe.

RedBullRR · 08-19-2011, 02:24 PM

Taken care of, car is aligned and well.

oreoleo · 01-08-2012, 07:20 PM

Here are the instructions:

http://cdn.splparts.com/tech/SPLHADJ.pdf

Mods, If the OP doesn't remove / correct this DIY I would suggest deleting this thread before more people follow this nonsense and possibly destroy their $280 arms.

This issue might have been corrected on the customer's alignment, but I don't think it should have left the shop like that even in a simple measuring tape install / alignment.

NaderS. · 08-16-2013, 11:00 PM

What is the point of toe bolts if you have to buy them separately, I lowered my car on Stance coilovers and want to adjust my rear camber but dont know what i need.

slam1918 · 04-19-2014, 04:23 PM

I just installed the SPC camber arm & toe bolt. I used "white out" to mark the area of material to remove when installing the cam bolts. Also helps a bunch when you have the right dye grinder bit. Grainger had it along with cutting oil. 1/2 the price of SPC although SPC has 2 bits in the kit, I only needed 1.

zefaulter · 05-22-2014, 01:47 PM

Is it safe to assume that car can be driven to shop for alignment after this DIY?

07-15-2011, 09:08 PM	#18 (permalink)
Vapiano Enthusiast Member Join Date: Jun 2011 Location: East Coast Posts: 471 Drives: Under PSI Rep Power: 14	I will be adding Swift Spec R springs in the next few weeks, what determines whether or not you need to use the toe bolts? __________________ GT-R Premium Edition TiMidpipeFront/Rear CameraLI QuadSTiR+Rear Emblem De-badgeFull Clear BraCarbon Fiber Rear Spoiler & Naca Ducts 370Z NISMO Z34 11 0032 Pearl White -SOLD!!*

08-08-2011, 07:09 AM	#22 (permalink)
RedBullRR Enthusiast Member Join Date: Oct 2010 Location: Suffolk Posts: 336 Drives: 2010 370Z Red Rep Power: 15	I could not find a DIY for this mod, and went ahead and started the install. I put the rear camber arms in with no problems. However when installing the Toe Bolt and enlarging the hole I made the hole larger for the toe bolt that goes were the camber arm goes and not the spring bucket. Below is a DIY for the 350Z that states this goes were the spring bucket goes. http://www.batit.com/forumpics/spctoeboltinstall.pdf My questions... Obv I have to remove those bolts now and place the stock ones back on. Did I **** up my cars toe by making those holes bigger? __________________ 2010 Solid Red Z: Mods: Stillen G3 Intakes \| BC Coilovers \| H&R 20/25 Spacers \| Stillen Splitter \| Stillen LW Pullie TBI \| Red GTR Start \| LED Interior \| Kenwood Double Din

08-08-2011, 10:49 AM	#23 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1320	If the SPC toe bolts fit in that location I would keep them there and buy another set for the correct location. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

08-08-2011, 11:40 AM	#24 (permalink)
RedBullRR Enthusiast Member Join Date: Oct 2010 Location: Suffolk Posts: 336 Drives: 2010 370Z Red Rep Power: 15	^ Can't I just put the stock toe bolt and put the SPC in the correct location? Or can they dial in the Toe thru that spot? __________________ 2010 Solid Red Z: Mods: Stillen G3 Intakes \| BC Coilovers \| H&R 20/25 Spacers \| Stillen Splitter \| Stillen LW Pullie TBI \| Red GTR Start \| LED Interior \| Kenwood Double Din

08-19-2011, 02:24 PM	#26 (permalink)
RedBullRR Enthusiast Member Join Date: Oct 2010 Location: Suffolk Posts: 336 Drives: 2010 370Z Red Rep Power: 15	Taken care of, car is aligned and well. __________________ 2010 Solid Red Z: Mods: Stillen G3 Intakes \| BC Coilovers \| H&R 20/25 Spacers \| Stillen Splitter \| Stillen LW Pullie TBI \| Red GTR Start \| LED Interior \| Kenwood Double Din

05-27-2011, 09:56 PM	#17 (permalink)
czheng51 Base Member Join Date: Sep 2010 Location: Los Angeles Posts: 110 Drives: MITSUBISHI EVO X Rep Power: 15	Thank you

07-19-2011, 10:54 PM	#20 (permalink)
Daishi9000 Enthusiast Member Join Date: May 2011 Location: Fresno Ca, Posts: 257 Drives: 370z Touring 6M PW Rep Power: 14	I will also add swift spec r springs, will i need to add any cam arms to the front?

01-08-2012, 07:20 PM	#27 (permalink)
oreoleo Base Member Join Date: Jan 2010 Location: Philadelphia PA Posts: 54 Drives: 09 Infiniti G37S 6MT Rep Power: 15	Here are the instructions: http://cdn.splparts.com/tech/SPLHADJ.pdf Mods, If the OP doesn't remove / correct this DIY I would suggest deleting this thread before more people follow this nonsense and possibly destroy their $280 arms. This issue might have been corrected on the customer's alignment, but I don't think it should have left the shop like that even in a simple measuring tape install / alignment. bigdog1250 and Mengly like this. __________________ '09 6mtS OB Coupe\|KW V3\|SPC\|Stillen 3G\|Invidia Gemini CB+HFC\|Nismo S/S\|Hotchkis

08-16-2013, 11:00 PM	#28 (permalink)
NaderS. Base Member Join Date: Oct 2012 Location: Stockton Posts: 47 Drives: 2011 silver 370z 6MT Rep Power: 13	What is the point of toe bolts if you have to buy them separately, I lowered my car on Stance coilovers and want to adjust my rear camber but dont know what i need.

05-22-2014, 01:47 PM	#30 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27	Is it safe to assume that car can be driven to shop for alignment after this DIY? Last edited by zefaulter; 05-22-2014 at 11:05 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] SPC rear CAMBER arms with Kinetix rear TRACTION / TOE arms	TVPostSound	Parts for sale (Private Classifieds)	2	03-19-2013 09:54 PM
Is there a DIY for front SPC Camber arms install?	TMAN1985	Brakes & Suspension	9	02-27-2012 04:23 AM
DDM DIY - SPL Parts Rear Camber Arms Install	M.Bonanni	Brakes & Suspension	7	10-04-2010 10:20 AM