Do It Yourself Fog Lamp (EASY)

bqd15124 · 06-20-2010, 11:27 AM

I could not take out those two Nuts. I finally dremeled them out. It took me 30 minutes to take out those two Nutty Nuts. Thanks everyone.

CBRich · 06-20-2010, 12:14 PM

I posted a very simple way to remove that dummy fog somewhere. Before you even mess with the nuts you take your dremel cutting wheel and put a small slit in the stud. Now put your ratcheting wrench on the bolt and a flathead in your slit. Hold the flat head tight and start cranking.

Billarf · 06-20-2010, 03:29 PM

It is very difficult (yes, possible) to get access enough to work with a dremel to cut those slots/cut decent slots. Reality is, if you use a heat gun to gently heat those locktite secured fasteners for 15-30 seconds the nuts will come off very easily with a box wrench..

HATED1 · 07-20-2010, 03:33 PM

thanks for the writes up!

Joka4411 · 08-11-2010, 09:58 AM

Nice job

lastblueprint · 09-26-2010, 03:55 PM

I have not seen many 370z with this lamp, IMOP i think its an easy Mod, right???

wdkwang · 02-17-2012, 10:49 PM

is this what you got?

Invisicord Products

lastblueprint · 02-20-2012, 08:19 PM

Yes thats the one......good stuff and holding on strong

Huckleberry · 04-24-2012, 03:06 PM

Quote:

Originally Posted by wdkwang

is this what you got?

Invisicord Products

ordered the cord. now i just have to decide which fog light i'd prefer.

lastblueprint · 04-25-2012, 12:44 AM

I got mine from just a local dealer.....

Telephone · 03-05-2012, 04:54 AM

I'm going to order the 6" cord to plug into the brake lights.

lastblueprint · 03-05-2012, 11:17 PM

Quote:

Originally Posted by Telephone

I'm going to order the 6" cord to plug into the brake lights.

Keep us Posted..........I would like to see that..

Huckleberry · 04-25-2012, 01:27 AM

the cord or the light?

Huckleberry · 08-03-2012, 07:33 PM

just ordered my fog light!

lastblueprint · 08-03-2012, 08:06 PM

keep us updated......I would like to see the outcome....

07-20-2010, 03:33 PM	#4 (permalink)
HATED1 Track Member Join Date: Jan 2009 Location: WA Posts: 504 Drives: 2010-370z-Red-6 SPD Rep Power: 18	thanks for the writes up! Last edited by HATED1; 07-20-2010 at 03:49 PM.

09-26-2010, 03:55 PM	#6 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 15	I have not seen many 370z with this lamp, IMOP i think its an easy Mod, right??? __________________ 2010 370z 40th Anniversary

02-17-2012, 10:49 PM	#7 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 21	is this what you got? Invisicord Products 1st likes this. __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

02-20-2012, 08:19 PM	#8 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 15	Yes thats the one......good stuff and holding on strong 1st likes this. __________________ 2010 370z 40th Anniversary

04-25-2012, 12:44 AM	#10 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 15	I got mine from just a local dealer..... __________________ 2010 370z 40th Anniversary

06-20-2010, 11:27 AM	#1 (permalink)
bqd15124 Base Member Join Date: May 2010 Location: CA Posts: 22 Drives: 40thAnn/G35/Accord08 Rep Power: 15	I could not take out those two Nuts. I finally dremeled them out. It took me 30 minutes to take out those two Nutty Nuts. Thanks everyone.

06-20-2010, 12:14 PM	#2 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 545	I posted a very simple way to remove that dummy fog somewhere. Before you even mess with the nuts you take your dremel cutting wheel and put a small slit in the stud. Now put your ratcheting wrench on the bolt and a flathead in your slit. Hold the flat head tight and start cranking.

06-20-2010, 03:29 PM	#3 (permalink)
Billarf Base Member Join Date: Mar 2010 Location: NY Posts: 132 Drives: . Rep Power: 16	It is very difficult (yes, possible) to get access enough to work with a dremel to cut those slots/cut decent slots. Reality is, if you use a heat gun to gently heat those locktite secured fasteners for 15-30 seconds the nuts will come off very easily with a box wrench..

08-11-2010, 09:58 AM	#5 (permalink)
Joka4411 Base Member Join Date: May 2010 Location: Baltimore Md Posts: 131 Drives: 40th anniver 370Z Rep Power: 15	Nice job

03-05-2012, 04:54 AM	#11 (permalink)
Telephone Enthusiast Member Join Date: Dec 2011 Location: San Diego, CA Posts: 297 Drives: 2012 Sport M6 Rep Power: 14	I'm going to order the 6" cord to plug into the brake lights.

04-25-2012, 01:27 AM	#13 (permalink)
Huckleberry Enthusiast Member Join Date: Apr 2012 Location: Los Angeles Age: 39 Posts: 410 Drives: Z Rep Power: 14	the cord or the light? __________________

08-03-2012, 07:33 PM	#14 (permalink)
Huckleberry Enthusiast Member Join Date: Apr 2012 Location: Los Angeles Age: 39 Posts: 410 Drives: Z Rep Power: 14	just ordered my fog light! __________________

08-03-2012, 08:06 PM	#15 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 15	keep us updated......I would like to see the outcome.... __________________ 2010 370z 40th Anniversary

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Easy question	RiCharlie	Audio & Video	2	01-15-2012 01:16 PM
Easy GPS speedo	Blue370tt	Exterior & Interior	7	01-12-2011 06:54 AM
Really? was it that easy!	Rooskey	Nissan 370Z General Discussions	13	08-10-2010 06:49 PM
Man...this car chips WAY too easy!	kannibul	Exterior & Interior	9	07-13-2009 05:05 AM
That was easy!	ncnickusa	New 370Z Owner	2	03-22-2009 08:15 PM