Nissan 370Z Forum - Do It Yourself Fog Lamp (EASY)

Page 4 of 6

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)

- - Do It Yourself Fog Lamp (EASY) (http://www.the370z.com/diy-section-do-yourself/19939-do-yourself-fog-lamp-easy.html)

wdkwang

02-17-2012 10:49 PM

is this what you got?

Invisicord Products

lastblueprint

02-20-2012 08:19 PM

Yes thats the one......good stuff and holding on strong

Telephone

03-05-2012 04:54 AM

I'm going to order the 6" cord to plug into the brake lights.

lastblueprint

03-05-2012 11:17 PM

Quote:

Originally Posted by Telephone (Post 1581877)

I'm going to order the 6" cord to plug into the brake lights.

Keep us Posted..........I would like to see that..

Huckleberry

04-24-2012 03:06 PM

Quote:

Originally Posted by wdkwang (Post 1551133)

is this what you got?

Invisicord Products

ordered the cord. now i just have to decide which fog light i'd prefer.

lastblueprint

04-25-2012 12:44 AM

I got mine from just a local dealer.....

Huckleberry

04-25-2012 01:27 AM

the cord or the light?

Huckleberry

08-03-2012 07:33 PM

just ordered my fog light!

lastblueprint

08-03-2012 08:06 PM

keep us updated......I would like to see the outcome....

Ubetit

08-04-2012 07:09 AM

Quote:

Originally Posted by 370Z JT (Post 557765)

^is there a way to decrease the light output??

http://farm9.staticflickr.com/8005/7...fe2ca01218.jpg

This is a standard 7443. Remove the outer contacts marked with the red arrow by wiggling them back and fourth until they break. Carefully bend the inner contacts marked with a green arrow to the outer position (where the outer contacts were). Inner contacts are 5.4 watts, the outer contacts are 25 watts like the 7440 (turn signal bulbs).... way too bright. It's possible that there are lower wattage LED's that would work. This brightness matches the rear red parking lamp brightness better. The stock 7440 is as bright as the turns or brake lights and i don't think it should be.

casper151291

01-13-2013 02:47 PM

1 Attachment(s)

Im having trouble connecting the license plate light with the z1 short cable please help as i'm not that experinced with electrical stuff

lastblueprint

03-11-2013 10:55 PM

Quote:

Originally Posted by casper151291 (Post 2109231)

Im having trouble connecting the license plate light with the z1 short cable please help as i'm not that experinced with electrical stuff

this part is tricky but doable. You have to insert those tips on the back of the license plate light. If you notice on my pictures how they insert. It is a tight fit but you need to be very patient....

let us know if you need help..

NaderS.

07-03-2013 10:29 PM

Help

So i bought the indvisicord and heres a link to the fog light im going to purchase but there no harness to connect the cords into as you can see from the pic. someone enlighten me pleaseeee.

Nissan 370Z JDM Rear Fog Lamp - 26580-1EL1A

1st	07-04-2013 02:07 AM

Quote:

Originally Posted by NaderS. (Post 2391352)

Quote:

Originally Posted by lastblueprint (Post 567543)

The invisicord is just a simple 3' wires with 2 connections, one is black and the other one is yellow. You will connect the invisicord to the back of the harness on the fog lamp. On the fog lamp there are 2 wires hooking up to a connector, you will place the invisicord wire on the back of that connector. Let me know if this info helps, feel free to hit me up, I do have plenty of pictures that help illustrate the installation.:tiphat:

Here is your answer. You hook it up to the back of the connector of the fog light. The back of the fog light connector would be the so called harness.

1st	07-04-2013 02:10 AM

Quote:

Originally Posted by casper151291 (Post 2109231)

Im having trouble connecting the license plate light with the z1 short cable please help as i'm not that experinced with electrical stuff

Like lastblueprint stated it could be done like his DIY. But the Z1 short cable you bought should have came with instructions (per Z1 website) on how to wire it up correctly its a different DIY then lastblueprint created.

All times are GMT -5. The time now is 10:04 AM.

Page 4 of 6

« First

Show 40 post(s) from this thread on one page