Most of the pics are dead =(
|
|
LinkBack | Thread Tools | Display Modes |
08-06-2014, 04:21 PM | #47 (permalink) | |
Premium Member
Join Date: May 2013
Location: St. Pete, FL
Posts: 3,848
Drives: 520whp Fire Breather
Rep Power: 86951 |
.......And now all of them are dead =(
Just when I wanted to do this install!
__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted Quote:
|
|
08-07-2014, 01:31 PM | #49 (permalink) | |
Premium Member
Join Date: May 2013
Location: St. Pete, FL
Posts: 3,848
Drives: 520whp Fire Breather
Rep Power: 86951 |
The pics weren't all that necessary.. I was able to get the stock mirror off and run the wiring for the Gentex 453 pretty easily.
The stock mirror comes off as described. The A-Pillar comes off easily too - just grab the top and pull, it will come loose. Find the middle clip which is hooked in the pillar, turn the plastic ribbon 90 degrees with needle nose pliers to release it. Then, just pull the pillar up and out and it will come right out. From there you can just run the wiring down to the fuse box and tuck under the headliner and you are good to go! The plastic finisher I got from Nissan appears to be generic and adjustable, I think you might as well buy a wiring kit off ebay that comes with the finisher. Good luck!
__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted Quote:
Last edited by Jayhovah; 08-07-2014 at 01:37 PM. |
|
08-07-2014, 04:40 PM | #51 (permalink) | |
A True Z Fanatic
Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521 |
Quote:
the only picture i needed was the one Mike posted how he tapped the wires on one of the DIY threads. |
|
08-11-2014, 04:55 PM | #52 (permalink) | ||
Premium Member
Join Date: May 2013
Location: St. Pete, FL
Posts: 3,848
Drives: 520whp Fire Breather
Rep Power: 86951 |
Quote:
Installed!
__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted Quote:
|
||
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Double DIN install in Base System opening | 355890 | Audio & Video | 5 | 06-29-2015 11:33 PM |
Request: Homelink mirror install | Skorch | DIY Section (Do-It-Yourself) | 25 | 05-08-2010 11:59 PM |
Nismo struts install | cab83_750 | Brakes & Suspension | 25 | 02-14-2010 05:40 PM |
Base (w/Nismo Parts - Non Nismo Z) vs Sport Package | kraphy | Engine & Drivetrain | 10 | 09-24-2009 01:15 PM |
Rear speaker install on a base 370z | Carbon_z | Audio & Video | 15 | 09-17-2009 03:58 PM |