DIY: Homelink install in a Base/Nismo

Jayhovah · 07-14-2014, 10:39 PM

Most of the pics are dead =(

Jayhovah · 08-06-2014, 04:21 PM

.......And now all of them are dead =(
Just when I wanted to do this install!

Aggie · 08-06-2014, 10:12 PM

Me too.

Dang it.

Jayhovah · 08-07-2014, 01:31 PM

Quote:

Originally Posted by Aggie

Me too.

Dang it.

The pics weren't all that necessary.. I was able to get the stock mirror off and run the wiring for the Gentex 453 pretty easily.

The stock mirror comes off as described. The A-Pillar comes off easily too - just grab the top and pull, it will come loose. Find the middle clip which is hooked in the pillar, turn the plastic ribbon 90 degrees with needle nose pliers to release it. Then, just pull the pillar up and out and it will come right out. From there you can just run the wiring down to the fuse box and tuck under the headliner and you are good to go!

The plastic finisher I got from Nissan appears to be generic and adjustable, I think you might as well buy a wiring kit off ebay that comes with the finisher.

Good luck!

kenchan · 08-07-2014, 04:38 PM

you can tuck the wire behind the a-pillar cover without removing it. just pull down the weather stripping on the door jam side.
makes your job go much faster.

kenchan · 08-07-2014, 04:40 PM

Quote:

Originally Posted by kenchan

i did my homelink a while ago and was a very simple install. no need to remove the a-pillar cover. just get a plastic squeegee and push the cord into the gap and around into the fuse box. i did pull the seal around the door opening temporarily.

i didnt unplug the battery either when i did the install. actually, i rarely remove the battery wire ground these days unless im working on the airbag.

here, i even mentioned this 4yrs ago..lol

the only picture i needed was the one Mike posted how he tapped the wires on one of the DIY threads.

Jayhovah · 08-11-2014, 04:55 PM

Quote:

Originally Posted by kenchan

here, i even mentioned this 4yrs ago..lol

the only picture i needed was the one Mike posted how he tapped the wires on one of the DIY threads.

I ended up using a couple of those fused add-a-circuit taps to tap the fuse block. Used the "BOSE AMP" circuit for 12V Constant and "CIGAR LIGHTER" for 12V switched. The "BOSE AMP" circuit was there with a 20A fuse even though I have a base... and I assume "CIGAR LIGHTER" is the power port in the passenger foot well.

Installed!

kenchan · 08-11-2014, 05:19 PM

sure beats having a garage door opener on the visor.

kenchan · 08-11-2014, 05:24 PM

Request: Homelink mirror install

post #6 by Mike.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Double DIN install in Base System opening	355890	Audio & Video	5	06-29-2015 11:33 PM
Request: Homelink mirror install	Skorch	DIY Section (Do-It-Yourself)	25	05-08-2010 11:59 PM
Nismo struts install	cab83_750	Brakes & Suspension	25	02-14-2010 05:40 PM
Base (w/Nismo Parts - Non Nismo Z) vs Sport Package	kraphy	Engine & Drivetrain	10	09-24-2009 01:15 PM
Rear speaker install on a base 370z	Carbon_z	Audio & Video	15	09-17-2009 03:58 PM

07-14-2014, 10:39 PM	#46 (permalink)
Jayhovah Premium Member Join Date: May 2013 Location: St. Pete, FL Posts: 3,848 Drives: 520whp Fire Breather Rep Power: 86951	Most of the pics are dead =(

08-06-2014, 10:12 PM	#48 (permalink)
Aggie Base Member Join Date: Apr 2013 Location: Magnolia Posts: 14 Drives: 2013 370Z PW M6 Rep Power: 12	Me too. Dang it.

08-07-2014, 04:38 PM	#50 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	you can tuck the wire behind the a-pillar cover without removing it. just pull down the weather stripping on the door jam side. makes your job go much faster.

08-11-2014, 05:19 PM	#53 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	sure beats having a garage door opener on the visor.

08-11-2014, 05:24 PM	#54 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Request: Homelink mirror install post #6 by Mike.