DIY: GTR Red Start-Stop Button Swap out

Trips · 05-04-2010, 12:00 AM

The first thing is mine is a 7AT so the manual version will differ but the ideas the same.
You have to remove the shift bezel that holds the hazard button.
You need to carefully lift up the shifter bezel from the base to pop it off, and disconnect the hazard button.
In the pic i also popped up the lower suede shifter bezel.
I used a screw driver so be careful so you don't leave a scratch.

Remove the kneepads there is one screw on each side holding the kneepads, and the rest are metal snap clips, They do come off pretty easily.

Next (remove the two screws that hold the front fascia panel, and pull forward) i went over board in what screws to be removed .. so all you need is the two in the pic.

You can see in the pic the ignition switch. Next compress the ignition sides to release the ignition Button from the front panel
and push the switch towards you to remove it.

Then disconnect the wire harness from the switch

Now take the GTR Button, and connect it to the wire harness

Now just slide the button back in

Here the Lower Bezel has been reinstalled followed by the top bezel reconnect the hazard wires, and your done.
Sorry for If I left anything out but the pics should help.

Here is the Part#
it was about $40 and a link to where you can purschase one.
Please supports our Vendors.

GTR Push Button Ingition Switches on Sale at Fontana Nissan!

Night time Photos

Thanks to TreeSemdyZee for his Comparison Pics

hazzazi · 05-04-2010, 12:07 AM

nice setup, that looks really nice...thanks for write up

+1

SE · 05-04-2010, 12:15 AM

Dammit you beat me to it :/

Trips · 05-04-2010, 12:20 AM

Quote:

Originally Posted by weeeee

Dammit you beat me to it :/

its a pretty easy install

AK370Z · 05-04-2010, 12:22 AM

I like it man. Just curious, any light goes through during nighttime? Pics?

SE · 05-04-2010, 12:24 AM

FYI- for those of you who don't know, this is the push start from the R35.

AK370Z · 05-04-2010, 12:36 AM

Quote:

Originally Posted by weeeee

FYI- for those of you who don't know, this is the push start from the R35.

MC · 05-04-2010, 03:13 AM

neat idea!

FuszNissan · 05-04-2010, 03:24 AM

Looks great Trip!

phelan · 05-04-2010, 12:01 PM

trips how much that cost ya, and where'd ya get it lol

i MIGHT be doing this now that i see it...

kenchan · 05-04-2010, 12:26 PM

nice job. looks good.

Trips · 05-04-2010, 04:45 PM

Quote:

Originally Posted by phelan

trips how much that cost ya, and where'd ya get it lol

i MIGHT be doing this now that i see it...

I bought it from Courtesy Nissan about $40 + tax + shipping $50

SWITCH UNIT-IGNITION - GTR (R35) 2009+ :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

XwChriswX · 05-05-2010, 07:52 PM

You should do something that signifies it as "The Big Red Button" somehow... Make it sinister...

azn370z · 05-05-2010, 08:26 PM

Have you thought of switching out the z gearshift for the gtr? Although The Button layout is different.

Trips · 05-05-2010, 10:08 PM

That would be an expensive Mod, if it were possible...

05-04-2010, 12:00 AM	#1 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	DIY: GTR Red Start-Stop Button Swap out The first thing is mine is a 7AT so the manual version will differ but the ideas the same. You have to remove the shift bezel that holds the hazard button. You need to carefully lift up the shifter bezel from the base to pop it off, and disconnect the hazard button. In the pic i also popped up the lower suede shifter bezel. I used a screw driver so be careful so you don't leave a scratch. Remove the kneepads there is one screw on each side holding the kneepads, and the rest are metal snap clips, They do come off pretty easily. Next (remove the two screws that hold the front fascia panel, and pull forward) i went over board in what screws to be removed .. so all you need is the two in the pic. You can see in the pic the ignition switch. Next compress the ignition sides to release the ignition Button from the front panel and push the switch towards you to remove it. Then disconnect the wire harness from the switch Now take the GTR Button, and connect it to the wire harness Now just slide the button back in Here the Lower Bezel has been reinstalled followed by the top bezel reconnect the hazard wires, and your done. Sorry for If I left anything out but the pics should help. Here is the Part# it was about $40 and a link to where you can purschase one. Please supports our Vendors. GTR Push Button Ingition Switches on Sale at Fontana Nissan! Night time Photos Thanks to TreeSemdyZee for his Comparison Pics ElVee, Quantum, Coming Soon!! and 3 others like this. __________________ Last edited by Trips; 12-21-2013 at 11:19 PM.

05-04-2010, 12:07 AM	#2 (permalink)
hazzazi Track Member Join Date: Apr 2009 Location: USA, Virginia / KSA Posts: 648 Drives: 09 nismo Silver Rep Power: 17	nice setup, that looks really nice...thanks for write up +1 __________________ i Don't Drive Fast, i just Fly Slow.

05-04-2010, 12:22 AM	#5 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	I like it man. Just curious, any light goes through during nighttime? Pics? decky243 and Zerop8tience like this. __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

05-04-2010, 03:13 AM	#8 (permalink)
MC Moderator Join Date: Oct 2008 Location: NC Posts: 3,238 Drives: 2015 GTR NISMO Rep Power: 24	neat idea! __________________ 2015 GT-R N1SMO "THE ONE" Instagram MCGTRN1SMO Youtube MCGTRNISMO

05-04-2010, 03:24 AM	#9 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	Looks great Trip! __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

05-04-2010, 12:15 AM	#3 (permalink)
SE A True Z Fanatic Join Date: Jan 2010 Location: San Jose, CA Posts: 4,236 Drives: 370z/STI/EVO X/IS-F Rep Power: 23	Dammit you beat me to it :/

05-04-2010, 12:24 AM	#6 (permalink)
SE A True Z Fanatic Join Date: Jan 2010 Location: San Jose, CA Posts: 4,236 Drives: 370z/STI/EVO X/IS-F Rep Power: 23	FYI- for those of you who don't know, this is the push start from the R35.

05-04-2010, 12:01 PM	#10 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	trips how much that cost ya, and where'd ya get it lol i MIGHT be doing this now that i see it... __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

05-04-2010, 12:26 PM	#11 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	nice job. looks good.

05-05-2010, 07:52 PM	#13 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	You should do something that signifies it as "The Big Red Button" somehow... Make it sinister... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

05-05-2010, 08:26 PM	#14 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	Have you thought of switching out the z gearshift for the gtr? Although The Button layout is different. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

05-05-2010, 10:08 PM	#15 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	That would be an expensive Mod, if it were possible... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ridiculous start/stop button question...	KillerBee370	Nissan 370Z General Discussions	53	07-26-2012 09:42 AM
Alternate Method for GTR Red Start-Stop Button Swap	Zmax	DIY Section (Do-It-Yourself)	9	03-24-2012 10:26 AM
[FOR SALE] GTR Start/Stop Button	chuckd05	Parts for sale (Private Classifieds)	17	09-13-2011 07:46 AM
GTR start stop button	Reaper42	Exterior & Interior	24	09-12-2010 02:09 AM
Start-Stop Button swap out	Minicobra1	Exterior & Interior	53	05-04-2010 04:19 AM