Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)
-   -   DIY: GTR Red Start-Stop Button Swap out (http://www.the370z.com/diy-section-do-yourself/18606-diy-gtr-red-start-stop-button-swap-out.html)

winnre 12-15-2013 10:29 PM

The very first comment in this thread has photos -- I want the CF/SD card slot input for my music, is this a standard Nissan thing or an after market?

Haboob 12-15-2013 10:32 PM

Quote:

Originally Posted by winnre (Post 2610931)
The very first comment in this thread has photos -- I want the CF/SD card slot input for my music, is this a standard Nissan thing or an after market?

Looks OEM, but possibly only one model year? /shrug

I didn't know people owned CF cards anymore.

Trips 12-15-2013 10:43 PM

Quote:

Originally Posted by winnre (Post 2610931)
The very first comment in this thread has photos -- I want the CF/SD card slot input for my music, is this a standard Nissan thing or an after market?

That was included with the Navigation Pkg for 09

Don't know exactly if they even offer that anymore

winnre 12-15-2013 10:50 PM

Well I have the USB slot in the center console, but having the slot on the dash would be better.

And along this thread, I take it the current 2014 Z takes the same red start button and this mod is still valid?

Trips 12-15-2013 10:52 PM

Yes. :)

winnre 01-01-2014 08:11 PM

My first mod! I'm surprised there are so many pages here of folks taking off so many panels and not just popping out the outer ring with a screwdriver. Maybe the first post needs to be edited to say DON'T DO IT THIS WAY!

I'd have finished 10 minutes sooner but I was trying to pull the start button out of the ring and not push. As soon as I checked here to see my errors I pushed instead, and the button went flying into the back seat.

The new one looks great!

LMBmikeZ 01-01-2014 08:55 PM

your Z has a back seat? :rofl2:

Haboob 01-01-2014 08:56 PM

Quote:

Originally Posted by LMBmikeZ (Post 2633265)
your Z has a back seat? :rofl2:

:wtf2:

Trips 01-01-2014 10:43 PM

Quote:

Originally Posted by winnre (Post 2633244)
My first mod! I'm surprised there are so many pages here of folks taking off so many panels and not just popping out the outer ring with a screwdriver. Maybe the first post needs to be edited to say DON'T DO IT THIS WAY!

I'd have finished 10 minutes sooner but I was trying to pull the start button out of the ring and not push. As soon as I checked here to see my errors I pushed instead, and the button went flying into the back seat.

The new one looks great!

Sure you could use the pop it out with a screwdriver approach

But I didn't want folks to potentially damage the sides of the panel trying to pop out the switch with a screwdriver :facepalm:

Thats the reason for the more careful DIY approach never mind this is the Original DIY and so their are others with the simple approach since then.

But Thanks for the advise. :rolleyes:



Good to hear you did it :tup:

exsanity 01-02-2014 02:44 AM

Quote:

Originally Posted by LMBmikeZ (Post 2633265)
your Z has a back seat? :rofl2:

Yours doesn't? :confused:
Where do you keep the hookers?

winnre 01-03-2014 01:19 PM

Let me look... no it doesn't!

Sensei Kreese 02-03-2014 01:55 PM

Installed my GTR start button this past Saturday. Tried popping off the ring with a eye glass screw driver but it wasn't coming out so I went with a small screw driver with a bigger surface to make sure I didn't leave any dents. It pops out pretty easy, only had to do one side. Very happy with the results, this DIY was very helpful.

Elan 02-04-2014 09:05 AM

Quote:

Originally Posted by exsanity (Post 2633499)
Yours doesn't? :confused:
Where do you keep the hookers?

Where they belong...the trunk! :p

eastwest2300 02-04-2014 01:44 PM

Quote:

Originally Posted by exsanity (Post 2633499)
Yours doesn't? :confused:
Where do you keep the hookers?

:icon18::bowrofl::icon18::bowrofl:

lgarcia 03-07-2014 04:53 PM

Very easy to install after reading the intructions here, THANKS!
I used an old credit card pushing in the corner of the card in at 11 and 4 o'clock positions and the clips clicked off... the rest was easy just followed the pictures here... this is my first mod, jut got the car a week ago, thanks again!


All times are GMT -5. The time now is 09:53 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2