DIY: ** Rear 20mm stud replacement spacers

happytheman · 01-03-2012, 07:48 AM

SiRay, what did you end up going with, size-wise? I'm sure you said, but I'm too lazy to search!

LunaZ · 01-03-2012, 08:35 AM

Quote:

Originally Posted by SiRay6

I used lug nuts and a breakbar to hold the hub steady so I could tighten down the new stud.

Thanks for posting this pic!
I was trying to explain how to do this without an impact wrench, but your picture is much more effective than my written explanation

+1 on NOT lubing the studs.

Repped.

LinPark · 01-03-2012, 01:55 PM

You might consider putting a pipe fitting over the studs where the breaker bar touches them because you don't want to damage the threads. Great pic by the way! And nice garage flooring also.

wheee! · 01-03-2012, 03:03 PM

LOL, look at the first post pictures.... I have the same floor!

SiRay6 · 01-03-2012, 05:19 PM

I went with 20mm front/rear...stock suspension.

I was in a pinch because my little impact wrench couldn't do it...I guess I'm not as creative as I thought since others seem to have accomplished this without impact also

How did you other guys hold the hub while doing the fronts. The rears I just put it into gear and it held fine...not sure if this is bad...but I got it done without putting too much force on the studs.

Also for the front studs..I made sure my breaker bar did not touch any of the threads of the new studs. The breaker bar rested only on the lug nuts and the stock hub ring. I was very careful about this as I did not want threads to be damaged.

Regarding the garage flooring...I like the flooring but it was done wrong by the guy I hired...I don't think he put a layer to protect the floor so I have brown spots burnt in from hot tires

It is not suppose to change colors from hot tires.

-Ray

m4a1mustang · 01-03-2012, 05:21 PM

Quote:

Originally Posted by LinPark

You might consider putting a pipe fitting over the studs where the breaker bar touches them because you don't want to damage the threads. Great pic by the way! And nice garage flooring also.

That's what I thought when I first saw the picture. It's a pretty nifty idea if you don't have (or want to use) an impact wrench, but I'd definitely want to protect the threads.

happytheman · 01-11-2012, 02:32 PM

Quote:

Originally Posted by SiRay6

I went with 20mm front/rear...stock suspension.
-Ray

Have you posted up pics of your before/after results anywhere?

Ced14 · 01-11-2012, 05:37 PM

put mine today, H&R 15mm front and 20 rear

anthonyy · 01-11-2012, 05:44 PM

looks good! side pics!

wheee! · 01-11-2012, 06:09 PM

Looks good! Now put the Swift Springs on!!!

anthonyy · 01-11-2012, 07:53 PM

^ that looks really good. I wanna do this but I'm going to be buying a front lip and I know I'm going to crack that mofo if my car is any lower.

happytheman · 01-11-2012, 08:42 PM

Quote:

Originally Posted by anthonyy

^ that looks really good. I wanna do this but I'm going to be buying a front lip and I know I'm going to crack that mofo if my car is any lower.

/\ This!

NOFATCHX · 02-22-2012, 06:04 PM

Went to Nissan to price this change up. $600+ and 5.5 hours. It claims the whole hub assembly has to "be disassembled" in order to remove and replace studs. I laughed. Spoke to him, explained what I saw and read in this thread, then I showed him all the pictures. He was surprised and agreed to put the car up on the lift and give it a try by following these instructions.

LinPark · 02-22-2012, 09:06 PM

Quote:

Originally Posted by NOFATCHX

Went to Nissan to price this change up. $600+ and 5.5 hours. It claims the whole hub assembly has to "be disassembled" in order to remove and replace studs. I laughed. Spoke to him, explained what I saw and read in this thread, then I showed him all the pictures. He was surprised and agreed to put the car up on the lift and give it a try by following these instructions.

Ah, the ole "We'll take a whack at it!" - I'd be hesitant to let these guys put my son's bicycle up on the lift.

All kidding aside, I did the job without a lift in less than 5 hours and that included ample drink breaks (if you show him this, make sure he knows the difference between breaks and brakes).

NOFATCHX · 02-23-2012, 08:22 AM

What kinda times this realistically take?! Based on pics and having a lift and proper equipment I'd of guessed less then two hours!!

01-03-2012, 07:48 AM	#166 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	SiRay, what did you end up going with, size-wise? I'm sure you said, but I'm too lazy to search! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

01-03-2012, 03:03 PM	#169 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	LOL, look at the first post pictures.... I have the same floor! __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

01-11-2012, 06:09 PM	#175 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Looks good! Now put the Swift Springs on!!! __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
H&R 20mm Stud-Replacement Front Spacer Install	Alstann	Wheels & Tires	8	03-03-2019 06:39 PM
[WTB] 20mm DRS spacers!! (stud replacement)	ts-c63	Parts for sale (Private Classifieds)	2	03-25-2013 11:47 PM
[FOR SALE] 20mm h&r built in stud spacers	memorylasts	Parts for sale (Private Classifieds)	5	02-27-2012 06:29 PM
LTT H&R 10mm Stud Replacement Spacers for 15mm stud replacement H&R	chuckd05	Parts for sale (Private Classifieds)	5	02-16-2011 06:05 PM
FS: Ichiba V1 Stud Replacement 20mm Wheel Spacers	toxik	Parts for sale (Private Classifieds)	9	01-19-2011 06:11 PM

01-03-2012, 01:55 PM	#168 (permalink)
LinPark A True Z Fanatic Join Date: Jan 2010 Location: Columbus, OH Posts: 1,077 Drives: '17 Camaro 2SS A8 Rep Power: 23	You might consider putting a pipe fitting over the studs where the breaker bar touches them because you don't want to damage the threads. Great pic by the way! And nice garage flooring also.

01-03-2012, 05:19 PM	#170 (permalink)
SiRay6 Base Member Join Date: Nov 2011 Location: Diamond Bar, CA Posts: 63 Drives: 12 370z Gunmetal 6MT Rep Power: 14	I went with 20mm front/rear...stock suspension. I was in a pinch because my little impact wrench couldn't do it...I guess I'm not as creative as I thought since others seem to have accomplished this without impact also How did you other guys hold the hub while doing the fronts. The rears I just put it into gear and it held fine...not sure if this is bad...but I got it done without putting too much force on the studs. Also for the front studs..I made sure my breaker bar did not touch any of the threads of the new studs. The breaker bar rested only on the lug nuts and the stock hub ring. I was very careful about this as I did not want threads to be damaged. Regarding the garage flooring...I like the flooring but it was done wrong by the guy I hired...I don't think he put a layer to protect the floor so I have brown spots burnt in from hot tires It is not suppose to change colors from hot tires. -Ray

01-11-2012, 05:44 PM	#174 (permalink)
anthonyy A True Z Fanatic Join Date: Apr 2011 Location: Los Gatos, CA Posts: 1,027 Drives: Lexus CT Rep Power: 16	looks good! side pics!

01-11-2012, 07:53 PM	#176 (permalink)
anthonyy A True Z Fanatic Join Date: Apr 2011 Location: Los Gatos, CA Posts: 1,027 Drives: Lexus CT Rep Power: 16	^ that looks really good. I wanna do this but I'm going to be buying a front lip and I know I'm going to crack that mofo if my car is any lower.

02-22-2012, 06:04 PM	#178 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	Went to Nissan to price this change up. $600+ and 5.5 hours. It claims the whole hub assembly has to "be disassembled" in order to remove and replace studs. I laughed. Spoke to him, explained what I saw and read in this thread, then I showed him all the pictures. He was surprised and agreed to put the car up on the lift and give it a try by following these instructions.

02-23-2012, 08:22 AM	#180 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	What kinda times this realistically take?! Based on pics and having a lift and proper equipment I'd of guessed less then two hours!!