DIY: Berk Technology HFC Install

teejnut · 01-02-2010, 07:14 PM

Anyone use a o2 sensor socket to remove the sensor vs. a regular 22mm wrench? I don't have either but I'm thinking of picking this up. Just seeing if anyone has experience with it. It's also the same one Autozone rents out, but for the price I rather just buy it keep it in my garage. Going to need to remove this down the road anyways.

Amazon.com: OEM 27110 Oxygen Sensor Socket: Home Improvement

KEVTEX · 01-02-2010, 08:27 PM

The O2 sensor socket with a 3/8th square hole on the side works well on the 370Z. It costs $4 at harbor freight an $8 at the local auto parts store. You could probably get by with a crescent wrench as my sensors did not take much effort to remove.

teejnut · 01-03-2010, 04:36 AM

Quote:

Originally Posted by KEVTEX

The O2 sensor socket with a 3/8th square hole on the side works well on the 370Z. It costs $4 at harbor freight an $8 at the local auto parts store. You could probably get by with a crescent wrench as my sensors did not take much effort to remove.

thanks for the tip. i'll prob get the HF one.

feelzpwr91 · 01-23-2010, 03:40 PM

Quote:

Originally Posted by RCZ

I think I'm going to give my mechanic an opportunity to install these

if you've already had it done, how much did they charge you and how long did it take them?

christian370z · 08-06-2010, 09:59 PM

This writeup was an enormous help, I cannot thank you enough! I had plenty of trouble with the bolts even though my car still has 100 miles on it. I shot out to Harbor Freight and grabbed a breaker bar and somemore extensions to get the bolts through the engine bay. Well, the 'breaker' bar did the trick:

WD40 was used, I could have saved myself some frustration if I was paying attention to which direction I was pulling (lefty loosy righty tighty) but they all came out after some choice expletives.

HATED1 · 08-25-2010, 09:00 PM

can someone rehost the pics? i see red x's! thanks!

M.Bonanni · 08-26-2010, 11:40 AM

Quote:

Originally Posted by HATED1

can someone rehost the pics? i see red x's! thanks!

Fixed.

HATED1 · 08-26-2010, 05:28 PM

thank you! oh and by the way i received my BERK HFC today with a cool bio of you! your my hero!

M.Bonanni · 08-26-2010, 05:36 PM

Quote:

Originally Posted by HATED1

thank you! oh and by the way i received my BERK HFC today with a cool bio of you! your my hero!

oh god. i guess thats one way of getting rid of them. Redline Time Attack provided us with those at the beginning of the season, like 1000 of them. We put them out at every event and I think we still have 998 of them left. Paul Walker had to re-order another 2000 I think though...

christian370z · 08-26-2010, 07:16 PM

This would have been awesome if you had rehosted a couple weeks ago! I went off of your written instructions and successfully completed my install, not hard if you take your time and have the right tools in my opinion.

Rooskey · 08-27-2010, 01:29 AM

Just did this mod tonight. I HIGHLY recommend using 1/2" drive ratchet and extensions for the two ft of extensions for the top bitch bolts. It was like day and night trying to use the 3/8's compared to the 1/2". Do not use an impact because there is to much energy wasted through the extension's. PB Blaster is the **** too (let it soak in for a while too). If you have a nismo with the H-pipe like my self you shouldn't have to unbolt the rest of the exhaust like mentioned. If I had to do this again I would recommend buying new gaskets for the Y/H-pipe as well. I really enjoy wrenching on cars and this product is not a bad DIY project if you use the right tools.

Urbanracer · 08-28-2010, 09:29 AM

Quote:

Originally Posted by HATED1

thank you! oh and by the way i received my BERK HFC today with a cool bio of you! your my hero!

Yeah I got one of those too! I especially liked how someone scribbled out the licence plate on the front of the car with magic marker. LOL

jlaughman22 · 08-29-2010, 06:49 PM

Thanks for writeup

Just did this today >> the cost >>1 broken universal joint and two broken extensions, couple of busted knuckles, cuts and about a gallon of lube. Broke all those tools on one stud that wouldnt move but finally broke free with a 4 foot breaker bar.

Red__Zed · 09-19-2010, 11:02 PM

thanks for the write up. I'm about to throw mine on whenever I've got some free time...

bplourde · 10-02-2010, 09:21 AM

I have a Stillen G3 intake installed--will I need to disconnect it from the throttle body the same way people have to with the stock intake?

01-02-2010, 07:14 PM	#46 (permalink)
teejnut Base Member Join Date: Sep 2009 Location: Burbank, CA Posts: 206 Drives: 09 Z34 Sport/6MT Rep Power: 16	Anyone use a o2 sensor socket to remove the sensor vs. a regular 22mm wrench? I don't have either but I'm thinking of picking this up. Just seeing if anyone has experience with it. It's also the same one Autozone rents out, but for the price I rather just buy it keep it in my garage. Going to need to remove this down the road anyways. Amazon.com: OEM 27110 Oxygen Sensor Socket: Home Improvement __________________ \|KW v3\|SSR Type F\|Invidia\|Berk\|Stillen\|Kenwood/Focal/Image Dynamics/Alpine\|

08-06-2010, 09:59 PM	#50 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	This writeup was an enormous help, I cannot thank you enough! I had plenty of trouble with the bolts even though my car still has 100 miles on it. I shot out to Harbor Freight and grabbed a breaker bar and somemore extensions to get the bolts through the engine bay. Well, the 'breaker' bar did the trick: WD40 was used, I could have saved myself some frustration if I was paying attention to which direction I was pulling (lefty loosy righty tighty) but they all came out after some choice expletives. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

08-26-2010, 07:16 PM	#55 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	This would have been awesome if you had rehosted a couple weeks ago! I went off of your written instructions and successfully completed my install, not hard if you take your time and have the right tools in my opinion. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Berk Technology Earth Day HFC Sale!!!	BerkTech	Exhaust/Intake	8	04-16-2012 02:46 PM
Berk Technology Cat-Back Coming Soon!	M.Bonanni	Intake/Exhaust	468	08-14-2009 10:36 PM

01-02-2010, 08:27 PM	#47 (permalink)
KEVTEX Base Member Join Date: Nov 2009 Location: Montgomery, TX Posts: 119 Drives: 2010 370Z 7at sp pg Rep Power: 16	The O2 sensor socket with a 3/8th square hole on the side works well on the 370Z. It costs $4 at harbor freight an $8 at the local auto parts store. You could probably get by with a crescent wrench as my sensors did not take much effort to remove.

08-25-2010, 09:00 PM	#51 (permalink)
HATED1 Track Member Join Date: Jan 2009 Location: WA Posts: 504 Drives: 2010-370z-Red-6 SPD Rep Power: 18	can someone rehost the pics? i see red x's! thanks!

08-26-2010, 05:28 PM	#53 (permalink)
HATED1 Track Member Join Date: Jan 2009 Location: WA Posts: 504 Drives: 2010-370z-Red-6 SPD Rep Power: 18	thank you! oh and by the way i received my BERK HFC today with a cool bio of you! your my hero!

08-27-2010, 01:29 AM	#56 (permalink)
Rooskey Track Member Join Date: Jul 2010 Location: South Carolina Posts: 974 Drives: 2014 Alpha7 GTR Rep Power: 16	Just did this mod tonight. I HIGHLY recommend using 1/2" drive ratchet and extensions for the two ft of extensions for the top bitch bolts. It was like day and night trying to use the 3/8's compared to the 1/2". Do not use an impact because there is to much energy wasted through the extension's. PB Blaster is the **** too (let it soak in for a while too). If you have a nismo with the H-pipe like my self you shouldn't have to unbolt the rest of the exhaust like mentioned. If I had to do this again I would recommend buying new gaskets for the Y/H-pipe as well. I really enjoy wrenching on cars and this product is not a bad DIY project if you use the right tools.

08-29-2010, 06:49 PM	#58 (permalink)
jlaughman22 Base Member Join Date: May 2010 Location: the bay Posts: 61 Drives: 2010 z Rep Power: 15	Thanks for writeup Just did this today >> the cost >>1 broken universal joint and two broken extensions, couple of busted knuckles, cuts and about a gallon of lube. Broke all those tools on one stud that wouldnt move but finally broke free with a 4 foot breaker bar.

09-19-2010, 11:02 PM	#59 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	thanks for the write up. I'm about to throw mine on whenever I've got some free time...

10-02-2010, 09:21 AM	#60 (permalink)
bplourde Base Member Join Date: Apr 2010 Location: Boston Posts: 16 Drives: 2010 370Z 40th Rep Power: 15	I have a Stillen G3 intake installed--will I need to disconnect it from the throttle body the same way people have to with the stock intake?