DIY: Berk Technology HFC Install

Fock · 06-29-2014, 03:30 AM

Hi,

Yesterday I started to disassemble my catalysts to replace them by Kinetic HFC.
Unfortunately, after 3hours of labour I had to stop because I was not able to get access to one of the 3 bolts on the front of the catalyst

It was OK to remove the top screw from the engine bay using a long wrench, but for the other bolt I don't know from where and using which tool I can loss it because the access is too tight. Moreover bolts are completely rusty

Can you please try to explain how to proceed and add pictures of the right tool I should use please ? Thanks for your help !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Berk Technology Earth Day HFC Sale!!!	BerkTech	Exhaust/Intake	8	04-16-2012 01:46 PM
Berk Technology Cat-Back Coming Soon!	M.Bonanni	Intake/Exhaust	468	08-14-2009 09:36 PM

06-29-2014, 03:30 AM	#11 (permalink)
Fock Base Member Join Date: Jun 2014 Location: France Posts: 20 Drives: 370Z Rep Power: 11	Hi, Yesterday I started to disassemble my catalysts to replace them by Kinetic HFC. Unfortunately, after 3hours of labour I had to stop because I was not able to get access to one of the 3 bolts on the front of the catalyst It was OK to remove the top screw from the engine bay using a long wrench, but for the other bolt I don't know from where and using which tool I can loss it because the access is too tight. Moreover bolts are completely rusty Can you please try to explain how to proceed and add pictures of the right tool I should use please ? Thanks for your help !