Request: DIY Oil Pressure Gauge Install

JB-370z · 03-16-2010, 10:52 AM

We need an install for the defi 60mm's like Forged did. Those are the best looking ones one the market.

DIGItonium · 03-16-2010, 08:11 PM

Quote:

Originally Posted by rarwz

i'll let you know if you can get to the 3rd clip on the under side that way.

As of right now though and to the best of my knowledge, it would be quite a challenge.

Oh yea, I never got around to looking inside the navi area. Please let me know how it goes. I'll probably change out the LEDs in the clock first. Too bad this is nowhere as easy as the 350Z.

rarwz · 03-17-2010, 08:41 AM

after taking a look at the AAM install, it looks like all they did was remove the navi area... so this may be a win!

Now as for getting it to mount in there, that may take a little work if your *only* removing the clock as per the depth issue and making it look similar to the others.

Taking a look at this, it looks as if the gauges are all 1 unit. epic fail?

DIGItonium · 03-17-2010, 09:07 AM

Yea, I remember seeing that in the service manual that the gauge assembly is one piece. IIRC, AAM had to get into the dash to remove the gauges. I may be wrong on this one if one can get access to the screws from inside the navi area.

So get into the navi area to pop the 3rd latch of each gauge face? Hopefully that's enough to pop off the needles and gauge faces. I'm going to have Black Cat Custom work on the gauge faces.

This is definitely a summer project... let me know how yours go, and perhaps you can make a DIY on your own! I'll do the DIY LED gauge face swap

rarwz · 03-17-2010, 02:17 PM

... thought i posted this earlier, but apparently not...
Contacted autometer about an A pillar gauge pod (not my first choice, but this is looking like a big pain).

Quote:

Hi rarwz,

There are no plans to produce one yet, though that could certainly change in the
future if it is determined that there is a market for one. If memory serves me
correctly, there is a pillar airbag on that vehicle as well which might complicate
things slightly. Ultimately, demand would dictate whether or not the investment is
made in producing one. Hope this helps, please let me know if I can be of further
assistance.

Best regards,

Joseph
Auto Meter Products, Inc.

rarwz · 03-24-2010, 07:01 AM

Last weekend I took the screen out. Found one of the bolts that holds in the gauges and removed it. The entire unit did not budge at all. I think there is a second bolt way to the left that also would need to be taken out then who knows what else.

Frustrated and giving up on this one for the time being.

DIGItonium · 03-25-2010, 01:00 AM

Are you trying to pull out the gauges from inside the navi area? I'm not sure if there's enough wiggle room. Is the first photo a single wire harness for the gauge cluster? We need to see if one of the guys from AA posted a DIY for the gauge clusters.

Also, were you able to peek underneath to see if you can get access to the bottom latch for the gauge bezel?

It's a pain... too bad it's nothing compared to the 350Z.

rarwz · 03-25-2010, 07:51 AM

I was wiggled trying to see if the whole cluster was free at all. It wasn't, so looking at the Nissan drawing I think there is a screw/bolt on the left end, and that is prob very hard to get to. The picture of the white harness could be the wiring for those gauges, it was more of a 'let me stick my camera in here and take a pix to see whats up there' type of thing. I felt around to see if it was indeed the bottom of the gauges. I couldn't tell, so unfortunately no definitive answer on that. I think we need AAM to write something up since they have done it before.

If they had a reasonable (ie 100-150$) to take out the clock and put in my AF (i'll wire it, just mount it in there) I would go on over there for the day... AAM?

DIGItonium · 05-15-2010, 04:39 PM

For anyone who is interested, getting to the triple meters is going to be a big pain in the butt. There are 40+ steps to take apart everything including the entire dash/console just to get to the triple meters. This is insanity compared to the 350Z. I haven't set aside time to take on this task, but definitely expect to have a few days of down time.

The attached graphic confirms that we need to get access underneath the dash (from behind) to remove the triple meters.

Chris@FsP · 05-15-2010, 05:33 PM

I think for the 370, something like this is the way to go as opposed to individual gauges-

Zeitronix DashDAQ Display

It monitors all OBDII functions, wideband o2, and offers many optional additional sensors such as boost, egt, temp, pressure gauges, etc. Fits in the stock cubby, and the display is completely customizable. It even has a GPS option.

XwChriswX · 05-15-2010, 05:51 PM

Digi, if you do get a good gauge mod done, I wanna see it br0! LoL I might try to beat 2theEx as your 1st customer LOL

DIGItonium · 05-15-2010, 10:04 PM

Quote:

Originally Posted by XwChriswX

Digi, if you do get a good gauge mod done, I wanna see it br0! LoL I might try to beat 2theEx as your 1st customer LOL

Gauge modding is easy. Getting to it is the hard part.

spearfish25 · 06-05-2010, 05:03 PM

Quote:

Originally Posted by FailsafePerf

I think for the 370, something like this is the way to go as opposed to individual gauges-

Zeitronix DashDAQ Display

It monitors all OBDII functions, wideband o2, and offers many optional additional sensors such as boost, egt, temp, pressure gauges, etc. Fits in the stock cubby, and the display is completely customizable. It even has a GPS option.

I'd like to find something similar that will just plug into the video-in of my Kenwood HU. Now that would be sweet.

spearfish25 · 06-05-2010, 05:08 PM

So does anyone know what the oil pressure warning light on our car is truly doing? A few people who have blown their coolers noted that the light either never came on or came on very late after the incident.

It would be nice if we could just use the stock input signal with an oil pressure gauge of our choosing. I'd happily put it on my A pillar or just to the left of the speedo cluster on my dash.

cossie1600 · 06-05-2010, 11:12 PM

probably something like 5psi or below

03-16-2010, 10:52 AM	#16 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	We need an install for the defi 60mm's like Forged did. Those are the best looking ones one the market. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

03-17-2010, 08:41 AM	#18 (permalink)
rarwz Base Member Join Date: Mar 2010 Location: 370z Posts: 178 Drives: 09 Touring Rep Power: 15	after taking a look at the AAM install, it looks like all they did was remove the navi area... so this may be a win! Now as for getting it to mount in there, that may take a little work if your only removing the clock as per the depth issue and making it look similar to the others. Taking a look at this, it looks as if the gauges are all 1 unit. epic fail? Last edited by rarwz; 03-17-2010 at 08:51 AM. Reason: added courtesyparts pix

03-17-2010, 09:07 AM	#19 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Yea, I remember seeing that in the service manual that the gauge assembly is one piece. IIRC, AAM had to get into the dash to remove the gauges. I may be wrong on this one if one can get access to the screws from inside the navi area. So get into the navi area to pop the 3rd latch of each gauge face? Hopefully that's enough to pop off the needles and gauge faces. I'm going to have Black Cat Custom work on the gauge faces. This is definitely a summer project... let me know how yours go, and perhaps you can make a DIY on your own! I'll do the DIY LED gauge face swap __________________

03-25-2010, 01:00 AM	#22 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Are you trying to pull out the gauges from inside the navi area? I'm not sure if there's enough wiggle room. Is the first photo a single wire harness for the gauge cluster? We need to see if one of the guys from AA posted a DIY for the gauge clusters. Also, were you able to peek underneath to see if you can get access to the bottom latch for the gauge bezel? It's a pain... too bad it's nothing compared to the 350Z. __________________

05-15-2010, 04:39 PM	#24 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Triple Meter Follow Up For anyone who is interested, getting to the triple meters is going to be a big pain in the butt. There are 40+ steps to take apart everything including the entire dash/console just to get to the triple meters. This is insanity compared to the 350Z. I haven't set aside time to take on this task, but definitely expect to have a few days of down time. The attached graphic confirms that we need to get access underneath the dash (from behind) to remove the triple meters. __________________ Last edited by DIGItonium; 02-09-2011 at 04:12 PM.

03-25-2010, 07:51 AM	#23 (permalink)
rarwz Base Member Join Date: Mar 2010 Location: 370z Posts: 178 Drives: 09 Touring Rep Power: 15	I was wiggled trying to see if the whole cluster was free at all. It wasn't, so looking at the Nissan drawing I think there is a screw/bolt on the left end, and that is prob very hard to get to. The picture of the white harness could be the wiring for those gauges, it was more of a 'let me stick my camera in here and take a pix to see whats up there' type of thing. I felt around to see if it was indeed the bottom of the gauges. I couldn't tell, so unfortunately no definitive answer on that. I think we need AAM to write something up since they have done it before. If they had a reasonable (ie 100-150$) to take out the clock and put in my AF (i'll wire it, just mount it in there) I would go on over there for the day... AAM?

05-15-2010, 05:33 PM	#25 (permalink)
Chris@FsP Enthusiast Member Join Date: Dec 2009 Location: Tulsa, OK Posts: 430 Drives: 2008 350Z TT Rep Power: 368	I think for the 370, something like this is the way to go as opposed to individual gauges- Zeitronix DashDAQ Display It monitors all OBDII functions, wideband o2, and offers many optional additional sensors such as boost, egt, temp, pressure gauges, etc. Fits in the stock cubby, and the display is completely customizable. It even has a GPS option. Last edited by Chris@FsP; 05-15-2010 at 05:37 PM.

05-15-2010, 05:51 PM	#26 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Digi, if you do get a good gauge mod done, I wanna see it br0! LoL I might try to beat 2theEx as your 1st customer LOL __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

06-05-2010, 05:08 PM	#29 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	So does anyone know what the oil pressure warning light on our car is truly doing? A few people who have blown their coolers noted that the light either never came on or came on very late after the incident. It would be nice if we could just use the stock input signal with an oil pressure gauge of our choosing. I'd happily put it on my A pillar or just to the left of the speedo cluster on my dash. __________________ 2013 Cadillac V-Wagon, RIP Z

06-05-2010, 11:12 PM	#30 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	probably something like 5psi or below

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STRI Oil Pressure Gauge... Amber 52mm to replace your clock !	travisjb	Parts for sale (Private Classifieds)	33	03-09-2010 07:02 PM
Oil Pressure Gauge	jpit	Exterior & Interior	6	03-07-2010 09:36 PM
Oil cooler install Request	Stealth_Z	DIY Section (Do-It-Yourself)	4	12-17-2009 04:34 PM
Oil Pressure Gauge	37Z	Exterior & Interior	0	06-14-2009 10:21 PM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 11:28 PM