DIY: Adding In-Cabin air filter to the 370Z

raps101 · 05-30-2020, 07:13 PM

Can anyone post the best/most up to date instructions for removing the glove box and installing the in cabin air filter? I have the Nissan oem B7277-1ea0b in my possession.

Sent from my SM-G965U using Tapatalk

TreeSemdyZee · 05-30-2020, 08:14 PM

Instructions haven’t changed since the beginning of this thread.

millerdiller · 06-27-2022, 05:37 PM

So it has been a little frustrating for me, the screw #6; I hate that one, it has fallen somewhere in the back of the glovebox assembly and although I can hear the screw rattle, I cannot seem to be able to take it out, plus I am not sure if I have broken some of the screw holding structure (U-nuts?), I am wondering if I need to remove the electric cabling to get the screw out and if I need something else to put the screw back in, would a magnetic long screwdriver and some U nuts be enough to get this done?

BettyZ · 06-28-2022, 01:34 PM

Quote:

Originally Posted by millerdiller

So it has been a little frustrating for me, the screw #6; I hate that one, it has fallen somewhere in the back of the glovebox assembly and although I can hear the screw rattle, I cannot seem to be able to take it out, plus I am not sure if I have broken some of the screw holding structure (U-nuts?), I am wondering if I need to remove the electric cabling to get the screw out and if I need something else to put the screw back in, would a magnetic long screwdriver and some U nuts be enough to get this done?

You're going to need to take out the glovebox itself. Follow the FSM and you'll be fine.

millerdiller · 07-09-2022, 10:50 PM

@bettyz thanks a lot!
So, I was able to locate the "FSM" at https://www.nicoclub.com/archives/us...-database.html, assuming that is what you meant, I am unable to locate the specific document for the glovebox removal, searching online, it appears that I might just be able to disconnect the cables and get it fully out and then reconnect them after I get the lost screw from behind the assembly? What do you think?

BettyZ · 07-12-2022, 12:24 PM

Quote:

Originally Posted by millerdiller

@bettyz thanks a lot!
So, I was able to locate the "FSM" at https://www.nicoclub.com/archives/us...-database.html, assuming that is what you meant, I am unable to locate the specific document for the glovebox removal, searching online, it appears that I might just be able to disconnect the cables and get it fully out and then reconnect them after I get the lost screw from behind the assembly? What do you think?

That'd work for sure.

05-30-2020, 07:13 PM	#226 (permalink)
raps101 Base Member Join Date: Jun 2009 Location: New York Posts: 60 Drives: 09 Nissan 370z T/M6 Rep Power: 16	Can anyone post the best/most up to date instructions for removing the glove box and installing the in cabin air filter? I have the Nissan oem B7277-1ea0b in my possession. Sent from my SM-G965U using Tapatalk Last edited by raps101; 05-30-2020 at 07:15 PM.

05-30-2020, 08:14 PM	#227 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27408	Instructions haven’t changed since the beginning of this thread. SouthArk370Z, Hubbabubba, Optimiser and 1 others like this. __________________ Borla S-Type \| Motordyne \| Z1 (lots) \| South Bend \| K&N \| Nismo/Nismo S-Tune \| Eibach \| Aerojacket \| Fujimara \| Spl \| ZSpeed Performance \| Kenwood-Infinity-Sound Ordnance \| Whiteline \| Ecutek \| Hotchkis \| Clazzio \| VQ Vortex \|Morimoto XB \|Dynosty Tune 329.64hp 265.73 ft/lb

07-09-2022, 10:50 PM	#230 (permalink)
millerdiller Base Member Join Date: Dec 2021 Location: San Jose Posts: 4 Drives: 2012-370z-White-Man Rep Power: 3	@bettyz thanks a lot! So, I was able to locate the "FSM" at https://www.nicoclub.com/archives/us...-database.html, assuming that is what you meant, I am unable to locate the specific document for the glovebox removal, searching online, it appears that I might just be able to disconnect the cables and get it fully out and then reconnect them after I get the lost screw from behind the assembly? What do you think? BettyZ likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No Cabin Filter on the 2009 370Z?	drisko	Nissan 370Z General Discussions	36	01-19-2023 03:26 AM
In Cabin Air Filter?	caneman88	Exterior & Interior	13	08-11-2012 11:50 AM
Cabin Filter	polarity	Nissan 370Z General Discussions	11	11-11-2009 12:24 AM
Confused Micro-Cabin Filter on 09's or just 2010?	Asheth	Nissan 370Z General Discussions	5	08-18-2009 11:00 PM
Cabin air filter	av370	Nissan 370Z General Discussions	3	07-17-2009 09:29 PM

06-27-2022, 05:37 PM	#228 (permalink)
millerdiller Base Member Join Date: Dec 2021 Location: San Jose Posts: 4 Drives: 2012-370z-White-Man Rep Power: 3	So it has been a little frustrating for me, the screw #6; I hate that one, it has fallen somewhere in the back of the glovebox assembly and although I can hear the screw rattle, I cannot seem to be able to take it out, plus I am not sure if I have broken some of the screw holding structure (U-nuts?), I am wondering if I need to remove the electric cabling to get the screw out and if I need something else to put the screw back in, would a magnetic long screwdriver and some U nuts be enough to get this done?