DIY: Adding In-Cabin air filter to the 370Z

eddix · 10-30-2015, 09:38 AM

Thanks for the help gentlemen. A quick jerk and that thing came right off. Filter changed and glove box back in place.

TreeSemdyZee · 10-30-2015, 02:10 PM

Glad to hear it!

ramoszx12r · 05-27-2016, 08:20 AM

That is Very good Thanks.

Quote:

Originally Posted by g96818

First off, i would like to thank you for pioneering this DIY, but I hope you don't mind if i expand a little more and make corrections on your DIY.
Do this at your own risk, I'm not responsible if you break something using this easier modified directions.

First off. there are 7 screws total. Screw #6 is sort of a hidden screw.

Remove screw 1 -> 4. if you have a super long screw driver then remove 5 -> 7 also, if not then read next step.

Next pull off the glove box. Grab the 2 spots circled in red and pull upwards. This allows you VERY easy access to screws 5 -> 7 as well as a much easier time removing the panel. This step is OPTIONAL, but as i mentioned, it gives you easy access to screws 5 -> 7 and it also gives you a spot to grab panel to pull it off. To put the glove box back, just line up the hinge and pop it back in.

Next GENTLY pull off the panel starting from the RIGHT side first. You don't wanna damage that extension area on the right side by pulling too hard on the left. Insert finger where the arrows are and grab the bottom with your other hand and pull. Do the same on the other side.
Removing the glove box lanyard is optional (actually, mines popped off as i was figuring how to put the glove box back in after accidentally removing it) but it gives you more space to work with.
Remember, pull GENTLY, you shouldn't have to pull hard after removing the hidden screw, #6.

The rest you can follow caneman88's to install/replace the filter. I just have one thing that I found might be useful and that is to cut 4 slots on the bottom of the filter wall so that you can close the vent door without smashing the filter. You'll know what i mean when you take off the vent door. Just line up the slots with the 4 things on the door and make like a 1/4" -> 1/2" cut. See pic for approx locations, measure the actual location with the vent door.

Yes the arrow on the filter points down. Air is sucked from the top and down into the circular thing.

I assume you guys know how to reverse the directions to put everything back.

Rep points much appreciated if you found this addition helpful

*edit* Fixed broken image. Let me know if the links are broken and I'll upload it again.

P's_Z · 06-11-2016, 08:01 AM

Quote:

Originally Posted by kenchan

kinda like tugging at a 5yr old to take away his teddy bear kind of tug.

not the kind of tugging u'd do like at a fat middle aged woman taking away her big jar of cookies she's getting ready to pay at check-out.

Sorry about bumping this, but too funny...

Maxefforts · 09-02-2016, 08:21 PM

Great job with the DIY. Bunch of cool peeps on here. This site or group has really answered so many questions a manual won't answer, and let's not even talk about some of the dealerships. they get real creative with some of their answers and OEW PRICES! Yes, I'm one of those that reads everything in the car manual but the safety part , I don't totally ignore it but let's just say I breeze through that. Hopefully this will help someone that needs a cabin air filter for the 370 Z at a really cheap price right now. Wal-Mart right now has the Purolator: C35479 for 6.79 free shipping. Yes free shipping. Of course I bought two. Thanks again for the DIY.

TreeSemdyZee · 09-02-2016, 09:22 PM

Quote:

Originally Posted by Maxeffors

Great job with the DIY. Bunch of cool peeps on here. This site or group has really answered so many questions a manual won't answer, and let's not even talk about some of the dealerships. they get real creative with some of their answers and OEW PRICES! Yes, I'm one of those that reads everything in the car manual but the safety part , I don't totally ignore it but let's just say I breeze through that. Hopefully this will help someone that needs a cabin air filter for the 370 Z at a really cheap price right now. Wal-Mart right now has the Purolator: C35479 for 6.79 free shipping. Yes free shipping. Of course I bought two. Thanks again for the DIY.

Just so you're not surprised, those aren't Purolator. They're aftermarket replacement. Not that it matters, I use replacements a lot, just thought I'd give a head's up.
Let us know if these fit well.
I just put a filter in yesterday and it cost me about three times that much. This would be a lot better as long as it fits well.

barncobob · 09-03-2016, 05:21 AM

cabin air filters are CHEEEEP on ebay, do some diggin

Swindler · 01-02-2017, 07:03 PM

Havin a hard time with these screws goin back in. They catch but then won't screw in much till they stop

Sent from my iPhone using Tapatalk

SG4247 · 01-02-2017, 07:15 PM

So, I did mine today after being in the car for seven years now!

I removed all the screws as shown in this thread, and then pulled on the glove box - and the whole assembly came out....

Really was easy, then look what I found when I opened the filter box door..

Thanks Nissan! Someone was in a hurry and didnt get it installed correctly.

Ohhh and the replacement filter was $7.87 from Oreilly's.

Thanks for the DIY!

SG4247 · 01-02-2017, 07:24 PM

Quote:

Originally Posted by Swindler

Havin a hard time with these screws goin back in. They catch but then won't screw in much till they stop

Sent from my iPhone using Tapatalk

I had same trouble with the screws also. If they went in hard, I just pulled the screw back out and picked another, until I found one that went in without high effort.

Swindler · 01-02-2017, 07:35 PM

Man yeah I can't even get one to fit in #6 lol it will go in a little and stay stuck guess that'll have to do I've been spending way too much time on this then I should. Frustrating

Sent from my iPhone using Tapatalk

TreeSemdyZee · 01-02-2017, 07:37 PM

Quote:

Originally Posted by Swindler

Man yeah I can't even get one to fit in #6 lol it will go in a little and stay stuck guess that'll have to do I've been spending way too much time on this then I should. Frustrating

Sent from my iPhone using Tapatalk

Make sure the clips that the screws go into are in the right position. This can cause headaches if not

Swindler · 01-02-2017, 07:42 PM

Yeah I tried checking even just screwing It into the little plate it goes into with the whole glove box encasing out but it wouldn't even go in lol

Sent from my iPhone using Tapatalk

Swindler · 01-02-2017, 07:50 PM

I got it out back together but not happy with it cuz the screws aren't flush in a couple spots. But I don't think it'll fall out it feels good. Just annoying I'll have to work on it again another time.

kinda hard to tell but 6 isn't in all the way although it won't move anywhere

Sent from my iPhone using Tapatalk

Wonka2581 · 01-02-2017, 08:06 PM

Subd

10-30-2015, 09:38 AM	#196 (permalink)
eddix Base Member Join Date: Nov 2013 Location: Raleigh, NC Posts: 13 Drives: 2013 370Z Rep Power: 12	Thanks for the help gentlemen. A quick jerk and that thing came right off. Filter changed and glove box back in place. TreeSemdyZee likes this.

10-30-2015, 02:10 PM	#197 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27409	Glad to hear it! __________________ Borla S-Type \| Motordyne \| Z1 (lots) \| South Bend \| K&N \| Nismo/Nismo S-Tune \| Eibach \| Aerojacket \| Fujimara \| Spl \| ZSpeed Performance \| Kenwood-Infinity-Sound Ordnance \| Whiteline \| Ecutek \| Hotchkis \| Clazzio \| VQ Vortex \|Morimoto XB \|Dynosty Tune 329.64hp 265.73 ft/lb

09-02-2016, 08:21 PM	#200 (permalink)
Maxefforts Base Member Join Date: Jan 2016 Location: Jacksonville, Fl Posts: 3 Drives: '16 370z Nismo Rep Power: 9	Great job with the DIY. Bunch of cool peeps on here. This site or group has really answered so many questions a manual won't answer, and let's not even talk about some of the dealerships. they get real creative with some of their answers and OEW PRICES! Yes, I'm one of those that reads everything in the car manual but the safety part , I don't totally ignore it but let's just say I breeze through that. Hopefully this will help someone that needs a cabin air filter for the 370 Z at a really cheap price right now. Wal-Mart right now has the Purolator: C35479 for 6.79 free shipping. Yes free shipping. Of course I bought two. Thanks again for the DIY. Presto and BeemaaZ like this.

01-02-2017, 08:06 PM	#210 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2612	Subd __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No Cabin Filter on the 2009 370Z?	drisko	Nissan 370Z General Discussions	36	01-19-2023 03:26 AM
In Cabin Air Filter?	caneman88	Exterior & Interior	13	08-11-2012 11:50 AM
Cabin Filter	polarity	Nissan 370Z General Discussions	11	11-11-2009 12:24 AM
Confused Micro-Cabin Filter on 09's or just 2010?	Asheth	Nissan 370Z General Discussions	5	08-18-2009 11:00 PM
Cabin air filter	av370	Nissan 370Z General Discussions	3	07-17-2009 09:29 PM

09-03-2016, 05:21 AM	#202 (permalink)
barncobob A True Z Fanatic Join Date: Sep 2015 Location: hangtown, CA Posts: 1,164 Drives: 16 370Z auto Rep Power: 590	cabin air filters are CHEEEEP on ebay, do some diggin

01-02-2017, 07:03 PM	#203 (permalink)
Swindler Base Member Join Date: Oct 2013 Location: Central CA Age: 35 Posts: 219 Drives: 2014 370Z PW Manual Rep Power: 12	Havin a hard time with these screws goin back in. They catch but then won't screw in much till they stop Sent from my iPhone using Tapatalk

01-02-2017, 07:35 PM	#206 (permalink)
Swindler Base Member Join Date: Oct 2013 Location: Central CA Age: 35 Posts: 219 Drives: 2014 370Z PW Manual Rep Power: 12	Man yeah I can't even get one to fit in #6 lol it will go in a little and stay stuck guess that'll have to do I've been spending way too much time on this then I should. Frustrating Sent from my iPhone using Tapatalk

01-02-2017, 07:42 PM	#208 (permalink)
Swindler Base Member Join Date: Oct 2013 Location: Central CA Age: 35 Posts: 219 Drives: 2014 370Z PW Manual Rep Power: 12	Yeah I tried checking even just screwing It into the little plate it goes into with the whole glove box encasing out but it wouldn't even go in lol Sent from my iPhone using Tapatalk

01-02-2017, 07:50 PM	#209 (permalink)
Swindler Base Member Join Date: Oct 2013 Location: Central CA Age: 35 Posts: 219 Drives: 2014 370Z PW Manual Rep Power: 12	I got it out back together but not happy with it cuz the screws aren't flush in a couple spots. But I don't think it'll fall out it feels good. Just annoying I'll have to work on it again another time. kinda hard to tell but 6 isn't in all the way although it won't move anywhere Sent from my iPhone using Tapatalk