DIY: Adding In-Cabin air filter to the 370Z

Cheech

Thanks for the DIY.

So how did you guys get this to fit? It's too long!


Thanks in advance

__________________
Thought for the Day:
My wife just stopped and said, "You weren't even listening, were you?"

I thought, "That's a pretty weird way to start a conversation."

brancky3

That's what she said!

__________________

Cheech

I'd pull it out, slide it back in, pull it slide it back in, still wouldn't fit. Pulled it out again, just to make sure it was going in the right slot, still no go. Tried forcing it with it with one hand while guiding it in with the other. The mofo will not fit!! Shoulda known better than to force a charcoal filter into a white box.

__________________
Thought for the Day:
My wife just stopped and said, "You weren't even listening, were you?"

I thought, "That's a pretty weird way to start a conversation."

kenhdcgov

My Brother, once you go charcoal, you never go back!! LOL & SMH.
If you were not using one of there, you are trying to stick a square peg
in a round hole, my friend!

Any of these will work. I used the charcoal CF10140 with no problem. Go to
page one or two on this subject to make sure of your insertion orientation, ok?
Good Luck!

STP: CAF1766
Purolator: C35479
WIX: 24883
Fram: CF10157

__________________
DARKSDE