HID Bulb Change

RockStarKick · 02-03-2011, 12:54 PM

Quote:

Originally Posted by Falcor

i decided to try my luck with the ijdm bulbs. I'll let y'all know if they work.

Sounds good..

When the bulbs from retrofit source didn't work, they are sending me some new ones. He recommended these in 6000k, RIGG : HID : 35W ??????????? ..
Yeah I know it's in Japanese.. I should be getting them today.. If I install, I
will take pictures..

Z_you_Later · 02-09-2011, 08:14 PM

Thanks for the advice guys .. I just swapped out my headlight bulbs without having to remove the tire or jacking up the car .. It was a tight squeeze but got it done.. This write-up was most definitely helpful +1 Rep

Falcor · 02-09-2011, 08:32 PM

see post here for my bulbs.

What HID bubls are people using ???

A 2 Z · 02-12-2011, 04:11 PM

Im installing 8000k Deep Blue HIDs on my car today. Done with the drivers side. As far as taking off the front wheels is a must. I tried doing it with the wheel turn method and was epically failing.

As far as removing the grey housing and bulb itself its really easy. Ill post up pics after im done. BTW i got the same bulbs the member Westwood has on his Z.

P.s. Hope the police around my area arent to anal bout my lights. Such a PITA just to swap headlight bulbs lol.

RockStarKick · 02-13-2011, 11:29 AM

Quote:

Originally Posted by A 2 Z

Im installing 8000k Deep Blue HIDs on my car today. Done with the drivers side. As far as taking off the front wheels is a must. I tried doing it with the wheel turn method and was epically failing.

As far as removing the grey housing and bulb itself its really easy. Ill post up pics after im done. BTW i got the same bulbs the member Westwood has on his Z.

P.s. Hope the police around my area arent to anal bout my lights. Such a PITA just to swap headlight bulbs lol.

8K, how much light output did you lose? Is it very noticeable ?

I have changed the headlights out in my car about 6 times so far and I can
assure you that it can be done without taking the wheel off..

Example, If I'm doing the passenger side, I will turn the wheel all the way left.
If I'm doing the driver side I turn the wheel all the way right. That gives plenty of room to pull back the fender liner and change the bulb. I don't remove the fender liner entirely just peel it back enough to get hand in ..

Falcor · 02-13-2011, 03:45 PM

i found it easier to leave the wheels straight. and just jack up the car on the side you are changing the bulbs on (with the supplied jack on front jack point) to let the wheels hang lowe. I have a lowered car and this works well for me, more than enough room to work.

A 2 Z · 02-14-2011, 12:19 AM

Quote:

Originally Posted by RockStarKick

8K, how much light output did you lose? Is it very noticeable ?

I have changed the headlights out in my car about 6 times so far and I can
assure you that it can be done without taking the wheel off..

Example, If I'm doing the passenger side, I will turn the wheel all the way left.
If I'm doing the driver side I turn the wheel all the way right. That gives plenty of room to pull back the fender liner and change the bulb. I don't remove the fender liner entirely just peel it back enough to get hand in ..

You slightly lose a little light output, but the cool thing about the lights I got is that when it shines on the white markers and signs on the road it gives this glowing effect to it. So technically it enhances your view in my opinion.

The color and look of it is perfect since I got the MB Z.

1325 · 02-14-2011, 03:04 PM

I just received my Philips Ultinon bulbs and installed them. Did not remove the wheels but I jacked up the car slightly. Can't wait to see how these new lights perform at night.

A 2 Z · 02-14-2011, 03:13 PM

Left: 8000k Deep Blue HID
Right: Stock HID

RockStarKick · 02-14-2011, 03:20 PM

Quote:

Originally Posted by Falcor

i found it easier to leave the wheels straight. and just jack up the car on the side you are changing the bulbs on (with the supplied jack on front jack point) to let the wheels hang lowe. I have a lowered car and this works well for me, more than enough room to work.

Gotcha, my car is factory height, no jacking up needed.. Still tight but can be done..

RockStarKick · 02-14-2011, 03:21 PM

Quote:

Originally Posted by A 2 Z

Left: 8000k Deep Blue HID
Right: Stock HID

Damn, that's a huge difference.. !!!

A 2 Z · 02-15-2011, 01:42 PM

Quote:

Originally Posted by RockStarKick

Damn, that's a huge difference.. !!!

hahaha... yeah it is but its great driving down a dark road (especially a highway) and the white lane markers and white on signs glow at you. Feel like im in Tron.

1325 · 02-15-2011, 10:12 PM

So here's my input on Philips Ultinon 6000K bulbs. The beam pattern is identical to stock, no more yellow tinge to the light beam, and it's pure white; no hint of blue at all. The high beam will suffer noticeable loss of throw when compared to stock 4300K, but you'll still be able to get by. I do notice my driver side bulb upon start-up flickers two times to a red color, and I assume it's the red burner core (unique to Philips) that is being vaporized inside the bulb casing upon warm up. I don't think this is the flicker problem people are facing when the bulbs fail to ignite at all.

Overall, good investment and the lights add positive aesthetics.

RockStarKick · 02-15-2011, 11:20 PM

Quote:

Originally Posted by 1325

So here's my input on Philips Ultinon 6000K bulbs. The beam pattern is identical to stock, no more yellow tinge to the light beam, and it's pure white; no hint of blue at all. The high beam will suffer noticeable loss of throw when compared to stock 4300K, but you'll still be able to get by. I do notice my driver side bulb upon start-up flickers two times to a red color, and I assume it's the red burner core (unique to Philips) that is being vaporized inside the bulb casing upon warm up. I don't think this is the flicker problem people are facing when the bulbs fail to ignite at all.

Overall, good investment and the lights add positive aesthetics.

Thanks for the review.. Now we need some pics !!! The bulbs will colorshift after a while of being on .. Probably get a tinge of blue in them.

ddanis60 · 04-27-2011, 04:50 PM

I bought some 24 dollar 6000k's from ebay and they have been working just fine for about a year now. never a single mis-fire and they have never failed to ignite. just fyi.

not sure on the brand.

02-09-2011, 08:14 PM	#47 (permalink)
Z_you_Later Base Member Join Date: May 2009 Location: L.A. BABY !! 323 area Posts: 183 Drives: 09 370z Mag Blk MT6 Rep Power: 16	Thanks for the advice guys .. I just swapped out my headlight bulbs without having to remove the tire or jacking up the car .. It was a tight squeeze but got it done.. This write-up was most definitely helpful +1 Rep __________________ Mag Blk 09 6 MT Touring + Navi / Color Matched Door Handles / Custom Injen CBE / Swift Spec R Springs / Rear Nismo Conversion Debadged / Sunline Front Lip + Sideskirts / Tinted (front to back) / Black Nismo Plate / Nismo Neck Pillows / White LED Kickplates / GTR Button / Evo-R CF Pillars + More Mods to COME ...

02-12-2011, 04:11 PM	#49 (permalink)
A 2 Z Base Member Join Date: Apr 2010 Location: Maryland Posts: 147 Drives: 09 MB 370Z AT Rep Power: 15	Im installing 8000k Deep Blue HIDs on my car today. Done with the drivers side. As far as taking off the front wheels is a must. I tried doing it with the wheel turn method and was epically failing. As far as removing the grey housing and bulb itself its really easy. Ill post up pics after im done. BTW i got the same bulbs the member Westwood has on his Z. P.s. Hope the police around my area arent to anal bout my lights. Such a PITA just to swap headlight bulbs lol. __________________ 09 MB 370z Sport/Touring AT \| 2015 Nismo Body \| Swift Springs \| Avant Garde M310s \| Stillen G3 \| F.I. Exhaust w/ HFC's \| Morimoto head/taillights \| MK2 Brainiac tablet

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: License Plate LED bulb Installation	AK370Z	DIY Section (Do-It-Yourself)	98	06-29-2017 09:09 PM
OEM HID bulb color?	kannibul	Exterior & Interior	6	01-25-2010 09:54 AM
HID Headlight Bulb Install....	Puma0183	Exterior & Interior	6	08-31-2009 02:26 AM
Headlight bulb size?	Bster	Exterior & Interior	7	03-22-2009 09:14 PM

02-09-2011, 08:32 PM	#48 (permalink)
Falcor Enthusiast Member Join Date: Sep 2010 Location: North Wilkesboro, NC Posts: 347 Drives: 2010 370 CFR edition Rep Power: 15	see post here for my bulbs. What HID bubls are people using ???

02-13-2011, 03:45 PM	#51 (permalink)
Falcor Enthusiast Member Join Date: Sep 2010 Location: North Wilkesboro, NC Posts: 347 Drives: 2010 370 CFR edition Rep Power: 15	i found it easier to leave the wheels straight. and just jack up the car on the side you are changing the bulbs on (with the supplied jack on front jack point) to let the wheels hang lowe. I have a lowered car and this works well for me, more than enough room to work.

02-14-2011, 03:04 PM	#53 (permalink)
1325 Enthusiast Member Join Date: Jul 2010 Location: Florida Posts: 287 Drives: 10 370Z BLK 6M Rep Power: 15	I just received my Philips Ultinon bulbs and installed them. Did not remove the wheels but I jacked up the car slightly. Can't wait to see how these new lights perform at night.

02-15-2011, 10:12 PM	#58 (permalink)
1325 Enthusiast Member Join Date: Jul 2010 Location: Florida Posts: 287 Drives: 10 370Z BLK 6M Rep Power: 15	So here's my input on Philips Ultinon 6000K bulbs. The beam pattern is identical to stock, no more yellow tinge to the light beam, and it's pure white; no hint of blue at all. The high beam will suffer noticeable loss of throw when compared to stock 4300K, but you'll still be able to get by. I do notice my driver side bulb upon start-up flickers two times to a red color, and I assume it's the red burner core (unique to Philips) that is being vaporized inside the bulb casing upon warm up. I don't think this is the flicker problem people are facing when the bulbs fail to ignite at all. Overall, good investment and the lights add positive aesthetics.

04-27-2011, 04:50 PM	#60 (permalink)
ddanis60 Base Member Join Date: Jun 2010 Location: Santa Maria, Ca Posts: 61 Drives: 2007 C6 Z06 Rep Power: 15	I bought some 24 dollar 6000k's from ebay and they have been working just fine for about a year now. never a single mis-fire and they have never failed to ignite. just fyi. not sure on the brand.