Nissan 370Z Forum  

DIY: Oil Cooler Installation on a Nismo (Damper Included!) - vipor

Originally Posted by martin82 is it better to have it infront or behind it? If you are talking to me then it doesn't really matter but you must get either

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > DIY Section (Do-It-Yourself)


Like Tree2Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 02-14-2012, 07:05 PM   #91 (permalink)
A True Z Fanatic
 
Baer383's Avatar
 
Join Date: Aug 2010
Location: Lawrenceville,Ga
Posts: 4,293
Drives: My foot up your azz
Rep Power: 30
Baer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond reputeBaer383 has a reputation beyond repute
Default

Quote:
Originally Posted by martin82 View Post
is it better to have it infront or behind it?
If you are talking to me then it doesn't really matter but you must get either a pusher fan or a puller, pusher goes in front puller goes in the back.
__________________
2013 ZL1

754 rwhp 747 rwtq
Baer383 is offline   Reply With Quote
Old 02-15-2012, 09:20 AM   #92 (permalink)
The370Z.com Sponsor
 
Dustin@Z1's Avatar
 
Join Date: Jun 2009
Location: NLA
Posts: 1,313
Drives: NLA
Rep Power: 18
Dustin@Z1 is a jewel in the roughDustin@Z1 is a jewel in the roughDustin@Z1 is a jewel in the rough
Default

Depending on how you position the core, you will most likely have to do a "Pusher" style fan. Keep in mind, the small the fan diameter (for the most part) the thicker the fan.
Dustin@Z1 is offline   Reply With Quote
Old 02-15-2012, 01:23 PM   #93 (permalink)
A True Z Fanatic
 
martin82's Avatar
 
Join Date: Nov 2011
Location: los angeles
Posts: 2,636
Drives: 12 Nissan 370Z MB M6
Rep Power: 20
martin82 has much to be proud ofmartin82 has much to be proud ofmartin82 has much to be proud ofmartin82 has much to be proud ofmartin82 has much to be proud ofmartin82 has much to be proud ofmartin82 has much to be proud ofmartin82 has much to be proud ofmartin82 has much to be proud of
Send a message via AIM to martin82
Default

Dustin, can you email me the new installation manual for a 2012 with stock cooler? Thanks! martin.ccpi@gmail.com
martin82 is offline   Reply With Quote
Old 04-13-2012, 10:10 PM   #94 (permalink)
A True Z Fanatic
 
Calvin's Avatar
 
Join Date: Aug 2009
Location: Castro Valley, CA
Age: 34
Posts: 1,418
Drives: 4GS, R8v10
Rep Power: 18
Calvin has a spectacular aura aboutCalvin has a spectacular aura about
Send a message via AIM to Calvin
Default

What did you end up doing instead of zip tieing the hoses?
__________________
Calvin is offline   Reply With Quote
Old 04-14-2012, 09:30 AM   #95 (permalink)
The370Z.com Sponsor
 
Dustin@Z1's Avatar
 
Join Date: Jun 2009
Location: NLA
Posts: 1,313
Drives: NLA
Rep Power: 18
Dustin@Z1 is a jewel in the roughDustin@Z1 is a jewel in the roughDustin@Z1 is a jewel in the rough
Default

Zip tieing seems to be the most cost efficient method. However, a few companies do make special billet aluminum brackets that help to space oil cooler lines apart evenly. I cannot find any at the moment, but they do exist. They use allen head style bolts to secure the brackets to the lines. They can be expensive, but are much nicer and make for a much cleaner install.
Dustin@Z1 is offline   Reply With Quote
Old 04-14-2012, 03:24 PM   #96 (permalink)
A True Z Fanatic
 
Calvin's Avatar
 
Join Date: Aug 2009
Location: Castro Valley, CA
Age: 34
Posts: 1,418
Drives: 4GS, R8v10
Rep Power: 18
Calvin has a spectacular aura aboutCalvin has a spectacular aura about
Send a message via AIM to Calvin
Default

Quote:
Originally Posted by Dustin@Z1 View Post
Zip tieing seems to be the most cost efficient method. However, a few companies do make special billet aluminum brackets that help to space oil cooler lines apart evenly. I cannot find any at the moment, but they do exist. They use allen head style bolts to secure the brackets to the lines. They can be expensive, but are much nicer and make for a much cleaner install.
ooo thank you! haha if you do find where I can get these brackets please lmk!
__________________
Calvin is offline   Reply With Quote
Old 04-15-2012, 07:42 AM   #97 (permalink)
A True Z Fanatic
 
spearfish25's Avatar
 
Join Date: Mar 2009
Location: Naples, FL
Posts: 4,117
Drives: to work
Rep Power: 1856
spearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond repute
Send a message via AIM to spearfish25
Default

Unless you're really worried about showing off your car from underneath or with the front fascia removed, I strongly suggest you just wrap the lines in heater hose and zip tie. Spend your hard earned money on more meaningful things.
__________________
2013 Cadillac V-Wagon, RIP Z
spearfish25 is offline   Reply With Quote
Old 04-15-2012, 04:43 PM   #98 (permalink)
A True Z Fanatic
 
Calvin's Avatar
 
Join Date: Aug 2009
Location: Castro Valley, CA
Age: 34
Posts: 1,418
Drives: 4GS, R8v10
Rep Power: 18
Calvin has a spectacular aura aboutCalvin has a spectacular aura about
Send a message via AIM to Calvin
Default

Quote:
Originally Posted by spearfish25 View Post
Unless you're really worried about showing off your car from underneath or with the front fascia removed, I strongly suggest you just wrap the lines in heater hose and zip tie. Spend your hard earned money on more meaningful things.
well mine is currently zip tied near the front sway bars, and i was worried about it hitting. then again i just raised up my car so it shouldn't be a problem, was just worried of it smacking back and fourth on the ground cause of the height of my car -__- .

lol thanks xP
__________________
Calvin is offline   Reply With Quote
Old 04-15-2012, 11:21 PM   #99 (permalink)
Enthusiast Member
 
Join Date: Dec 2011
Location: Cypress
Posts: 277
Drives: 2011 Nismo #4 MB
Rep Power: 14
Compdoc777 is on a distinguished road
Default

Thanks for the write up, I'll be installing mine this weekend I got the 24 row, but found a used 34 row for $90 Setrab. Going to send the $238 buggar back!

Can't believe they don't have these standard.
Compdoc777 is offline   Reply With Quote
Old 09-17-2012, 01:14 AM   #100 (permalink)
Base Member
 
anhdat503's Avatar
 
Join Date: Jul 2012
Location: Portland Oregon
Posts: 216
Drives: 12 Nissan 370z NismO
Rep Power: 13
anhdat503 is on a distinguished road
Default

i will do it one next thank for sharing it
__________________
Injen Intakes*HKS Hi-Power Ti Exhaust*Tein Lowering*Stillen Sway Bars*SPC Front & Rear*Black Door Handle*BlackOut TailLights*Nismo CF Shift Knob*CF Hood Struts*CF Cubby Door*CF Shifter Trim*CF Radiator Cover*CF Brake Fluid Cover & Battery Cover
anhdat503 is offline   Reply With Quote
Old 05-31-2013, 06:24 PM   #101 (permalink)
Enthusiast Member
 
Join Date: Apr 2013
Location: Gilbert, AZ
Posts: 252
Drives: 2012 Nismo
Rep Power: 12
olddudesrule is on a distinguished road
Default Just adding some tips for 2012 owners...

Just finished the install of the Z1 Motorsports oil cooler kit (25 row Setrab w/ Mocal thermostatic sandwich plate). Overall, the install took me @ 4 hours start to finish, but I'm new to the car, and I generally read and reread the instructions. I didn't take any pictures because it pretty much mirrored the DYI already on here.

Went pretty smoothly, and per the DYI's I've seen, with just a couple of minor issues, specifically related to the 2012's and their factory oil cooler sandwich plate. The instructions from Z1 cover the difference in sandwich plate orientation (fittings come out @ 7:00 vice 10:00 when mounted), but in just a small section. I actually had to have my cooler line come in from two different angles (still merging at 7:00 on the plate) so that I could get the filter in there. Also, I chose to use the smaller (stock sized) filter, as opposed to the newer Purolater L14610 (stock sized in the L14612) because there just wasn't enough room for the larger filter. With the new factory oil cooler (water cooled), and the Mocal sandwich plate on there, there is little room for the bigger filter. I think I could have squeezed it in there, with the end of the bigger filter about 1/4" from the frame rail, but said "**** it" and went with the smaller filter.

Other than that issue, the only dig on the instructions is that the cooler line routing pics are from an older model, and with the 2012+, you'll have to find the best way to run yours. I ended up cutting a small piece of the hard plastic plate just under and right of the coolant bottle to run the lines up and over the frame rail, and down to the sandwich plate.

Lastly, since I have a Nismo, I needed to flip the front damper rod, but I also added the extra step of flipping the mounting plates too, so the writing on the damper sticker is face up. The kit came with four 1/8" washers to push the damper out forward a bit to clear the cooler, but I needed to add another 1/8"-1/4" to get sufficient clearance. Just to be safe, I also added some rubber fuel hose, two 1" sections, around the damper bar at the edges of the cooler to ensure the bar remains off the cooler fins.

Oh yea, the cooler mounting holes at the bottom, the right one specifically, needed to be elongated to allow me to get to the bolt hole. No biggie, but another mod needing attention.

Overall, I'm pleased so far. Have just started it and let it run a couple of times to check for leaks before I put the under tray back on. No leaks, but you are adding another five points of failure to the oil cooling system (two connections at the cooler, two at the Mocal sandwich plate, and the Mocal sandwich plate against the factory plate. This makes me leary, and I'll be keeping an eye on it.

I'll add a post after I've gotten a chance to see the difference in oil temps. We're already hovering @ 100+ here in Phoenix, so it's gonna be needed....
olddudesrule is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
370Z NISMO Exhaust Installation Instructions AK370Z Nissan 370Z Owners Manual / Service Manuals 6 01-11-2012 08:48 AM
370z Nismo White, Pics included mdbrich New Nismo 370Z Owner 36 08-26-2010 03:03 AM
Oil cooler installation sminky63 Nissan 370Z General Discussions 24 11-23-2009 08:58 PM
Oil Cooler Installation DIY Request. spearfish25 DIY Section (Do-It-Yourself) 3 05-16-2009 03:58 PM


All times are GMT -5. The time now is 03:54 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2