|
A couple of weeks ago I installed an AEM Boost/AFR gauge that has data logging capability. It obviously already has the boost pressure and air fuel ratio information but what
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
06-28-2016, 08:35 AM
|
#1 (permalink) |
|
Track Member
 
Join Date: Apr 2013
Location: Huntsville, AL
Posts: 832
Drives: 2019 GT-R
Rep Power: 20169   |
Tach signal made easy
A couple of weeks ago I installed an AEM Boost/AFR gauge that has data logging capability. It obviously already has the boost pressure and air fuel ratio information but what was missing was the engine RPM (tach signal). I contacted AEM and they sent me a link to MSD and a inductive sensor that they sell. Being inductive, it does not require you tapping into your cars wiring, it simply mounts to the 12V wire that either fires an injector or coil pack. It detects the signal using an inductive pickup and the re-creates the signal at the proper 12 volt level. Just what I needed.
Mine is on the way! https://www.msdperformance.com/produ...ers/parts/8918 Rep points welcome!
__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE! |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Whiteline Diff Bushings (Made Easy) | Nut_N_Much | DIY Section (Do-It-Yourself) | 7 | 02-17-2024 07:08 AM |
| tach signal wire? | Snakes709 | Engine & Drivetrain | 4 | 07-04-2018 12:42 PM |
| Tach/RPM signal | rosten99 | Engine & Drivetrain | 3 | 02-01-2016 12:14 AM |
| Tach signal for data logger | pokeyl | Tuning | 3 | 05-18-2013 03:18 PM |
| Tach signal on the z370's ICU | pulgoso33 | Track / Autocross / Drifting / Dragstrip | 0 | 04-15-2009 08:58 PM |
3Likes
Threaded Mode
