Would heating the housing with a heat-gun help remove the housing lens? Or baking it in the oven?

Baking, would be the way to go.

Thanks :tiphat:

Tbone, just did mine today http://www.the370z.com/exterior-inte...tml#post575961

http://i576.photobucket.com/albums/s...D/DSC04136.jpg

Wow turned out great. Hahahah told ya u gotta pry hard!

I love it! Car looks so nice from the back at night :drool: I never thought I can pry open it. Thanks :tup:

Here's mine:

http://www.the370z.com/members/yamah...4-l1020623.jpg

SWEET! Post some post install pictures Meow!!! :icon17:

Here you go:

http://www.the370z.com/members/yamah...6-img-0018.jpg

Same panel for interior (in pitch black garage):

http://www.the370z.com/members/yamah...7-img-0016.jpg

Checking in with the OP to see if these bulbs have burnt yet.

Something like this might also work

2x T10 168 W5W 9 SMD White LED Wedge Signal Car Lights - eBay (item 150520451323 end time Dec-14-10 17:11:19 PST)

Yes you can OR you can support our forum vendor Yourledshop. I bought mine from him and they are perfect! no burn out or anything. The 24 led surface leds are VERY reliable! After this license plate DIY install, I changed ALL MY LIGHTS to square SMD 24 led.

http://www.the370z.com/body-interior...your-370z.html

My thread: http://www.the370z.com/exterior-inte...tml#post568159

Would not think 24 of those would fit. Now I see why yours are blinding bright.

So the bulbs the SMD's that normally come in the kit for the lisence plate are just bulbs and not the panels? I didn't see on the site where to specify when you order. I only saw the SMD Panel menu option for the trunk lighting. So I only received 1 panel, and 4 smaller bulbs. I have no idea what goes where now.

looks great