Nissan 370Z Forum - fog light questions 13+

Nissan 370Z Forum (http://www.the370z.com/)

- DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)

- - fog light questions 13+ (http://www.the370z.com/diy-section-do-yourself/127386-fog-light-questions-13-a.html)

fishermanof93

06-13-2018 11:10 AM

fog light questions 13+

hi all i have done a lot of research on the forum for this and it seems there are mixed thoughts. i am wanting to take apart my fog lights to paint the crome black so that it matches my headlights. any information on this would be greatly appreciated. only had the car a month and am loving it.

redondoaveb

06-13-2018 11:15 AM

Quote:

Originally Posted by fishermanof93 (Post 3764204)

Are you talking about your drl's? If so, they have to be cut open.

Jayhovah

06-13-2018 02:41 PM

Quote:

Originally Posted by redondoaveb (Post 3764206)

Are you talking about your drl's? If so, they have to be cut open.

I don't think this is true, though it has been parroted around the forum. I cant remember who, but an older member on here did it and he opened them using an oven just as he did his headlights.

Can not confirm though, as I have not attempted this myself.

redondoaveb

06-13-2018 03:12 PM

Quote:

Originally Posted by Jayhovah (Post 3764251)

I had my drl's modded by a reputable company (Yunique LED) and he had to cut mine open.

Jayhovah

06-13-2018 03:28 PM

Quote:

Originally Posted by redondoaveb (Post 3764257)

I had my drl's modded by a reputable company (Yunique LED) and he had to cut mine open.

That sounds pretty definitive!!

fishermanof93

06-18-2018 08:30 AM

thanks for the information. do they just silicone them back together after?

redondoaveb

06-18-2018 09:36 AM

Quote:

Originally Posted by fishermanof93 (Post 3765276)

thanks for the information. do they just silicone them back together after?

My guy used some kind of glue/epoxy, hard to to where they were cut.

All times are GMT -5. The time now is 01:33 AM.