Anyone with a windshield removal DIY??

RonRizz

Like title states. looking for DIY to remove windshield, to install some dash speakers

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

OxZed

Like something custom? ~ Cause you can easily remove the factory top-mounted dash speakers with the windshield in.

Jayhovah

You're definitely going to end up seducing a safelite guy.

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted

RonRizz

yes, something custom.
My local glass guy wont do it, safelite wants to charge full price, as if they were supplying the glass.
I may end up having a go at it myself, worst that can happen is safelite has to replace it anyways if i damage it.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

Zingston

Sounds dirty...

SG4247

Dude you are crazy. Taking the front glass out of these cars is a BITC*.

I know, I have had two put in. Paint damage, broken clips on the A-pillars you name it.

If you really must do it, have a no SHI* professional take it out (one that has done a 370Z before), they will likely break that glass too.

Then have the same guy put in a new one.

Trips

I never heard of the windshield having to be removed to install/remove those front dash mounted speakers.

__________________

RonRizz

Just to be clear... The factory speakers have been out of my car for 6 years, and replaced with aftermarket drivers. (and yes, I did it from inside.)
My intention is to make a custom mount in the dash location for a midrange driver that is larger than the factory grill, so there will be a good deal of modifications made to fit them in, and possibly custom grills as well.
I need room to get my gorilla hands in there to perform the surgery.
I am also aware of the possibilty that the windshield MAY have to be removed if the need to replace them arises. I am working on that design snafu.
I am willing to go through this to make these mods. I never said I was rational, or sane.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

Trips

Ah Gotcha!

Well, From the looks of it you may have to budget for a replacement windshield.

Your caught between a rock and a hard place.

But you already know that your less painful $$ option is to simply place those speakers elsewhere

Good Luck!

EDIT: I don't think there's a DiY made for such a thing here, But there's always Youtube for basic directions

__________________

DrNumbers

Hahaha... the quest for improved sound quality. 2" mid-ranges in the dash just really don't cut it. I've also thought of cutting my dash to fit bigger mids in there. Another possibility is to put in kickpanels (and move up to mod street), although I'm in a 7AT. I don't know if there would be room in a 6MT.

Are you putting new speakers in the dash or just relocating your old ones?

RonRizz

New speakers. Pre ordered a set of Stereo integrity M3 midranges. I hope to have them in hand soon.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

GaleForce

I would pull the dash, do the work, reinstall.

__________________

RonRizz

Really?? do you think it would be that much easier?
I've never done one before, but to ME that seems like a daunting task.
Bear in mind I'm over 50, Shoulder replaced, Knee replaced, round in the middle, so I don't bend and stretch like I did 20 years ago... Lol
Don't get me wrong, I'm not afraid to attempt nearly any task, and am quite mechanically inclined, so maybe I'll look into that route.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

DrNumbers

If you pull the dash, you could build enclosures for your speakers and get the most out of them. I think you should do it! And you should also put together a DIY so I can do the same thing later on when I finally decide on my "final" set of mid-ranges.

RonRizz

there is a DIY for pulling dash on the site already.... You first!

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals