DIY: 370z Oil Galley

Orestp · 01-27-2019, 05:04 PM

Thanks for the write up!

Wondering if it's necessary to release fuel pressure before taking everything apart - did you do the fuel pressure release procedure?

jwick · 01-27-2019, 05:39 PM

Quote:

Originally Posted by Orestp

Thanks for the write up!

Wondering if it's necessary to release fuel pressure before taking everything apart - did you do the fuel pressure release procedure?

There was very little fuel pressure, if any, when I did my turbo install. If you let it set for a day or so, there likely won’t be any.

Rusty · 01-27-2019, 07:45 PM

Quote:

Originally Posted by jwick

There was very little fuel pressure, if any, when I did my turbo install. If you let it set for a day or so, there likely won’t be any.

I have phunk's fuel pressure gauge. After 24hrs of sitting, it's almost to zero.

jwick · 01-27-2019, 07:56 PM

Quote:

Originally Posted by Rusty

I have phunk's fuel pressure gauge. After 24hrs of sitting, it's almost to zero.

Exactly. That’s where I started, with Phunk’s fuel gauge fitting.

01-27-2019, 05:04 PM	#1 (permalink)
Orestp Base Member Join Date: Jul 2011 Location: Edmonton, Alberta Posts: 43 Drives: 2010 370Z Rep Power: 14	Fuel pressure release Thanks for the write up! Wondering if it's necessary to release fuel pressure before taking everything apart - did you do the fuel pressure release procedure? __________________ GTM Twin Supercharger / GTM Large Capacity Oil Pan / GTM Valve Body Upgrade / Setrab 34 row oil cooler <- Deleted, Replaced with Laminova water to oil oil cooler / MotorDyne ART pipes / Cusco RS LSD / Tuned by Specialty Z / 15mm Ichiba spacers front & rear