Installed a kenwood double din today. Everything works good but there's the flashing seat belt light on the tach... there was 2 factory harness that I had nothing to connect
|
|
LinkBack | Thread Tools | Display Modes |
01-02-2017, 12:05 PM | #1 (permalink) |
Base Member
Join Date: Sep 2016
Location: New Jersey
Posts: 34
Drives: 2009 6spd
Rep Power: 9 |
FLASHING SEAT BELT TACH. Light!!
Installed a kenwood double din today. Everything works good but there's the flashing seat belt light on the tach... there was 2 factory harness that I had nothing to connect to with the metra harness and antenna.. any help?!
|
01-02-2017, 02:16 PM | #2 (permalink) |
Base Member
Join Date: Sep 2015
Location: Dutchess Co., NY
Posts: 49
Drives: 2014 370Z 6MT
Rep Power: 10 |
you're going to have to reset the light. I assume that you undid the airbag indicator to the right of the radio? There is a write up in the stickies in the audio section. check that out and you should be fine if you follow the procedure.
__________________
Current Cars:2014 370z, 1988 Suzuki Samurai (mint) Past Cars: 2006 IS250, 2007 Scion TC (boosted), 2003 Civic SI EP3 and the list goes on... |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Soaked Seat Belt... | ChopsZ | Exterior & Interior | 3 | 09-06-2016 11:18 PM |
Seat belt swap | JaviZ | Exterior & Interior | 3 | 01-20-2014 11:38 PM |
seat belt | Axelsc1 | Wanted | 0 | 12-31-2011 09:01 AM |
Seat belt rubbing seat | axeman71 | Exterior & Interior | 6 | 08-23-2011 07:46 PM |
Seat belt light | Red370 | Nissan 370Z General Discussions | 10 | 02-26-2010 10:23 PM |