![]() |
Double din wiring
Installing a kenwood ddx373bt, i have the metra 70-7553 wiring harness. The wires are all color matched to the ones on the radio I haven't soldered them yet just twisted together to make sure everything works. when I pop the start button back on and turn the car on the head unit does not come on. Do I need to connect the ground wires together or ground them to the chasis? I read with this harness I don't need to do that Or am I forgetting a part.
Also the light green parking wire has a connector on the end but I don't see where it connects. * there's a million posts on how to install the radio but none on the actual wiring( which is the hard part) unless i just can't find them |
If I remember correctly the pins on the 70-7553 metra have to be switched around. You need to look at the service manual
Sent from my iPhone using Tapatalk |
Quote:
|
They match up so idk why it's not turning on.. there's also 3 other harness plugs that don't plug into anything now. Think I'm just gonna take it to the shop
|
Check your fuses just to make sure it's not blown. Ground wires together and connected to ground wire that is connected to chassis
Sent from my iPhone using Tapatalk |
Quote:
|
All times are GMT -5. The time now is 03:02 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2