DIY: Door handles (disassemble, paint, reassemble & swap out)

OldGuyFla

I started the painting today. I will be using a 4 step procedure. Adhesion promoter, primer, basecoat, & clearcoat. I got most of the paint at this site.
Automotive Touch Up Paint from PaintScratch - Order Pro Grade Paint - PaintScratch.com ( photo 1 )

! - Scuffed up the pieces with 400 wet or dry.
2 - wiped everything down with wax & grease remover.
3- Wiped it all down again with a tack rag.
4 - Sprayed the Adhesion promoter - 1 light coat flash time 5 min., 1 wet coat flash time 10 to 15 min. no longer than 30 min.
5_ Sprayed the primer - 1 light coat & 2 wet coats, flash time between coats 5 min. ( photo 3 )

Going to let the primer dry & I don't know if I will get to spraying the basecoat & clearcoat this weekend but Monday for sure.

Attached Images

	DSCF0174.JPG (392.3 KB, 87 views)
	DSCF0159.JPG (54.5 KB, 56 views)
	DSCF0157.JPG (55.8 KB, 103 views)

__________________