DIY:REAR Fog Light install with New harness for US spec 370Z + Radar hardwire w/pics

Spartan 1771

Excellent! I just purchased the fog light. Now I need to get the stalk.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

Baronsmokes

Blank Electrical.10 amp fuses.Two in place.Fill the other 2 slots.

Attached Images

IMG_1208_zps9arjvzq3.jpg (169.3 KB, 33 views)

JARblue

Any links to the purchase the stalk? I did not find any searching Part# 25560-1EA0C on several parts websites including Nissan's. When I searched for the stalk, the only ones that came up were JDM.

__________________

Spartan 1771

I don't think this is going to be easy to obtain here in the States.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

JARblue

It's the normal Canadian stalk right? I know a few forum members up in Canadia - I'll probably just ask one of them

__________________

Spartan 1771

Let me know if they are willing to help others out. I'm absolutely willing to send them the funds to cover the purchase, shipping and their time and effort.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

JARblue

It certainly makes sense to combine efforts. I will inquire and see if that is something that might be doable.

__________________

Spartan 1771

Thanks! Let me know how it pans out.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

BboyZ

not sure if this what you looking for. NO pic though from EBay
https://www.ebay.com/i/332541060117?chn=ps

JARblue

I actually did come across that. The ad has zero information though. Shipping from the UAE. And when I came across it, I think I was still figuring out that the second to last character in the part number is the number zero and not the letter O. So I couldn't be sure on what the actual part was in the ad. But that does indeed look like it.

__________________

BboyZ

I would say 0 as this part catalog indicate same part number scheme.

Just had nothing to do. While doing laundry, trying to help.

When I looked up the code 25540M, there are 4 part numbers that comes up.

https://parts.nissanusa.com/nissanpa...artcode=25540M

Attached Images

	25560-1EA0C.JPG (28.0 KB, 20 views)
	25560-1EA0C-2.JPG (26.4 KB, 30 views)

Baronsmokes

Hi
The part number for stalk will only show in Canadian Nissan.Will not show in US parts books.My car is 2016 so I hope this works in cars made before and after.LOL not many changes over the years.Once it is hooked to Factory harness and fuses are in it will light.Will not show on dash.To see icon on dash you have to put the bulb in.This kind of time consuming to do so it is your choice.

Spartan 1771

Do you also have to run the wiring harness to the lamp from the stalk, or is it already installed from the factory?

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

Baronsmokes

Was already installed from factory.

Spartan 1771

That is excellent! Like I said, I just got the light in the other day, so all I need is the stalk.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...