Replacing OEM Door Speakers & Tweeters

sdeanjr1991

Hey guys,

I bought some Kicker 6.5's for my doors that will drop in fine with new mounting holes drilled, but I had one question. I've got the speaker grills off for the tweeters, but the fosgates I bought say I need to splice into the wiring for the tweeters.

It has been YEARS since I worked on car audio. When I pull these tweeters off and undo the wires connected to it, am I just looking to splice directly into those after cutting the connectors?

I couldnt find this question with the appropriate answer using the search function, so I am sorry if this has been asked multiple times.

Thanks!

RonRizz

that depends.. did your fosgate tweeters come with crossovers? are they inline, or mounted to the tweeter.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

YzGyz

Yup yup.. If the speaker set came with a crossover, you will run you amp -/+ into the corssover then into the respective driver/tweeter. If the set did not come with a crossover, I would tie them directly into the 6.5'' driver terminals and be done with it. However, most decent speakers come with a crossover or bass blocker or something to sire to the tweeters.

YzGyz

__________________
http://www.the370z.com/members-370z-...gyzs-turn.html

YzGyz