QuickJack Lift System

BettyZ

Your garage is almost as OCD-clean as mine.. good to see I'm not the only one out there

__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods

Felix 808

They sell these
https://www.quickjack.com/accessorie...l-hangers.html

__________________
Semper Fi

Μολὼν λαβέ

OxZed

lol. Yep! It's actually pretty messy in the pics as I have two bikes I've been working on - parts here 'n there.

YzGyz

Ox, that's nice but why not have then standing vertical? That would save you some space.
Very nice rack you got there.

__________________
http://www.the370z.com/members-370z-...gyzs-turn.html

YzGyz

OxZed

Well, I did look at QuickJack's vertical wall-mount offering & it's neat; but, I would've had to get mine high enough to clear the base molding (dang finished garage) and make some sort of "bumper" to keep them banging the heck out of the walls. Things have some weight on 'em too.

Ultimately though, I have an "attached" & "detached" garage - I wanted to have some way to easily move them between the two without tearing up the mini-wheels on the jacks themselves. Having caster wheels on my "rack" did the trick.

old guy

Has anybody lifted their car and disconnected the pump ( to get it out of the way ) for a week or so ? Any problems because of that ?

Thanks

__________________
I better walk before they make me run....

CB1

I lift my Z up to have it up all winter without the pump or hoses connected.
I've done that for a couple Winters now with no issue.

Sent from my SM-G975U1 using Tapatalk

__________________
2011 Metallic Black, Touring/Sport, Nav, AT
| F.I. Twin Turbo #060 | E85 | F.I. Built 7AT | F.I. Flex Plate | F.I. 34 Row Oil Cooler | F.I. 19 Row 7AT Cooler | ECUTEK Tuned By Sebastian | 647 WHP 605 TQ |

BettyZ

No issues. The manual states the system is designed so you can do that .

Sent from my SM-G955U using Tapatalk

__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods

old guy

Thanks guys!

__________________
I better walk before they make me run....

TBatt

I have found a good storage solution for the pump, rubber blocks and hoses. It's the Stanley STST33031 tool storage cart. It has wheels and a collapsible handle to easily move it around.

It is available through Amazon https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1

I'm the OP of this thread and have been using the cardboard box that the pump was shipped in for storage for all of these years. Well, it finally started to come apart and I wanted a good solution for storage. This Stanley case works perfect. It holds everything except the stands themselves. Even room to store extra transmission fluid.

As far as disconnecting the pump after the car is up it is not a problem as the mechanical stop is what prevents the lift from going down.

Attached Images

QJ Case.jpg (639.5 KB, 36 views)

__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

ZoomZ

Great Idea. Will do the same! Thanks

Zingston

Cool nike sticker on the rear fender, bro!

BettyZ

Go home Zingy, you're drunk.

Sent from my SM-G955U using Tapatalk

__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods

Rusty

It's in the first picture.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Zingston

Put your glasses on old man.