QuickJack Lift System

Fuzzzy · 06-14-2019, 02:18 PM

Quote:

Originally Posted by Spoiler

If everyone keeps talking about these dang jacks, I’m going to wind up buying some too....

Damn you all...

I know exactly what you mean. My back won't allow me to crawl under the car--or get back out--but I have been thoroughly enjoying this thread vicariously. I don't know whether to be annoyed or grateful that these weren't around much earlier.

JLarson · 06-21-2019, 08:39 PM

Got mine up and running tonight. Took multiple bleed attempts but now it's smooth!

BettyZ · 06-22-2019, 08:37 AM

Protip: check the pressure on the air cylinders every 3 or 4 lift cycles.

Sent from my SM-G955U using Tapatalk

JLarson · 06-22-2019, 08:41 AM

Quote:

Originally Posted by BettyZ

Protip: check the pressure on the air cylinders every 3 or 4 lift cycles.

Sent from my SM-G955U using Tapatalk

Good note. What are you using to pressurize yours? I have a small pump, but it's not awesome.

BettyZ · 06-22-2019, 09:29 AM

Quote:

Originally Posted by JLarson

Good note. What are you using to pressurize yours? I have a small pump, but it's not awesome.

I have a HF 21 gallon air compressor in my garage. It's so loud I have to put on HF earmuffs when I run it, but it does the job and it's cheap. The $$$ I saved went towards hookers and blow.. both of which I did on the QuickJack

JLarson · 06-23-2019, 06:57 AM

Quote:

Originally Posted by BettyZ

I have a HF 21 gallon air compressor in my garage. It's so loud I have to put on HF earmuffs when I run it, but it does the job and it's cheap. The $$$ I saved went towards hookers and blow.. both of which I did on the QuickJack

I'll have to see if I can find an attachment for mine, I hadn't even thought of using the compressor.

Used the QJ yesterday to rotate tires on wife's car, it went great! Love this thing.

BettyZ · 06-23-2019, 10:37 AM

Quote:

Originally Posted by JLarson

I'll have to see if I can find an attachment for mine, I hadn't even thought of using the compressor.

Used the QJ yesterday to rotate tires on wife's car, it went great! Love this thing.

You can find a digital tire pressure gauge on Amazon for relatively cheap.

BettyZ · 06-24-2019, 09:24 PM

Walked out of the grocery store and found this fella and his passenger-side partner chilling on my pinch welds lol. Always check that all your blocks are off the car!!

Sent from my SM-G955U using Tapatalk

JLarson · 06-25-2019, 02:41 PM

Quote:

Originally Posted by BettyZ

Walked out of the grocery store and found this fella and his passenger-side partner chilling on my pinch welds lol. Always check that all your blocks are off the car!!

Sent from my SM-G955U using Tapatalk

I learned that lesson when my brother's friend drove off with one of mine still on his car...

JARblue · 06-25-2019, 03:02 PM

I've lost several hockey pucks that way. $1 apiece used so not a big deal. Those pinch blocks aren't quite as cheap though...

BettyZ · 06-25-2019, 04:00 PM

Quote:

Originally Posted by JARblue

I've lost several hockey pucks that way. $1 apiece used so not a big deal. Those pinch blocks aren't quite as cheap though...

Yeah.. glad they stayed on. I'm thinking imma spraypaint them dayglo yellow.

Sent from my SM-G955U using Tapatalk

JLarson · 06-25-2019, 04:15 PM

Quote:

Originally Posted by JARblue

I've lost several hockey pucks that way. $1 apiece used so not a big deal. Those pinch blocks aren't quite as cheap though...

Personally, I grabbed 4 of the rubber hockey pucks and used them on the QJ. Worked just fine, and definitely a lot cheaper...

Felix 808 · 07-13-2019, 10:31 AM

Great deals for Quick Jack going on now.

https://www.quickjack.com/garage-sal...6b48-458090361

OxZed · 07-13-2019, 10:22 PM

Quote:

Originally Posted by OxZed

I've had mine for about a year & love 'um … just gotta find a better way to store them in the garage! ~Thinking of welding up some sort rack on caster wheels.

Anybody found a nifty storage solution?

Here's what I ended up doing … I wanted them "mobile" & stored off the garage floor, so this works for me.

DarkJak · 07-14-2019, 08:35 PM

I've seen some folks use a chain against the wall to stand them up and store them vertically. I need to find a better solution than just keeping them in between my cars.

06-21-2019, 08:39 PM	#212 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,074 Drives: 14 Nissan 370z MR M6 Rep Power: 2684370	Got mine up and running tonight. Took multiple bleed attempts but now it's smooth! JARblue, Hotrodz, old guy and 4 others like this. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

06-22-2019, 08:37 AM	#213 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 38 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Protip: check the pressure on the air cylinders every 3 or 4 lift cycles. Sent from my SM-G955U using Tapatalk Hotrodz, ZontheRocks and JLarson like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

06-24-2019, 09:24 PM	#218 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 38 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Walked out of the grocery store and found this fella and his passenger-side partner chilling on my pinch welds lol. Always check that all your blocks are off the car!! Sent from my SM-G955U using Tapatalk JARblue, madwi, TBatt and 2 others like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

06-25-2019, 03:02 PM	#220 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I've lost several hockey pucks that way. $1 apiece used so not a big deal. Those pinch blocks aren't quite as cheap though... BettyZ likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

07-13-2019, 10:31 AM	#223 (permalink)
Felix 808 A True Z Fanatic Join Date: Oct 2011 Location: Camarillo, CA Posts: 1,063 Drives: 2011 PW/Grey T/S 7AT Rep Power: 2807	Great deals for Quick Jack going on now. https://www.quickjack.com/garage-sal...6b48-458090361 __________________ Semper Fi Μολὼν λαβέ

07-14-2019, 08:35 PM	#225 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	I've seen some folks use a chain against the wall to stand them up and store them vertically. I need to find a better solution than just keeping them in between my cars. __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KW HLS (Hydraulic Lift System)	CLOUD10	Brakes & Suspension	45	02-09-2017 11:18 AM
Too low to lift car	laricb	Brakes & Suspension	18	01-07-2012 04:12 PM
Garage Lift System	maxtodorov	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	9	06-05-2010 07:26 PM