QuickJack Lift System

TBatt

Make sure you check out the part of this thread that shows how I mounted the pump to the cradle. If you have two people it is not a problem, but if you are trying to this alone, make sure you use some cardboard to shim the pump to help align the mounting holes. That was the only difficult thing about the assembly. Also, make sure you have a couple of quarts of auto transmission fluid and teflon tape on hand.

Let us know how it works out for you!

__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

Burnt350

Will do. Thanks.

Just any ole' ATF?


Sent from my iPhone using Tapatalk

__________________
2012 370z Sport - Black Cherry Metallic

TBatt

Yes, use the cheap stuff. I used O'Reilly's brand and it works fine.

It does not matter if it is Dextron or any of the other flavors.....

__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!