DIY: [How-To:] Racing Seat airbag light fix

vq37818 · 06-06-2019, 10:57 PM

Anyone try the passenger airbag sensor in a fixed Bride seat? Wondering if the pad would fit fine under the cushions... Thanks in advance.

forza370z · 10-01-2019, 01:33 AM

Quote:

Originally Posted by CJBinder

So I have used up all the extra wiring from the connector on the seat. Anyone know the size of the connector pins for the airbag connectors?

Sent from my iPhone using Tapatalk

Quote:

Originally Posted by SouthArk370Z

I'd solder a piece of wire to the pins. YMMV

That's a good question. I wish there is an aftermarket connector that we can just plug and play. Coz those resistors might not last long. It would be nice to switch out the resistors easily.

NorthStyle · 10-01-2019, 06:17 AM

Just find someone who's parting out a wrecked Z and buy the pigtails. Always a few up on Facebook or if you're not in FB, car-part.com has a hundred or so wrecked Z's from all over the country.

redondoaveb · 02-06-2020, 03:20 PM

I just did the resistor add for the Recaro that I just installed. I had to cut the plug off my stock seat (but I didn't care). I did the airbag reset and it worked perfectly.

SouthArk370Z · 02-06-2020, 04:21 PM

Quote:

Originally Posted by redondoaveb

I just did the resistor add for the Recaro that I just installed. I had to cut the plug off my stock seat (but I didn't care). I did the airbag reset and it worked perfectly.

LENTZ · 03-24-2020, 02:27 PM

ISO: SEAT AIRBAG CONNECTORS

I spent the morning calling all the junkyards within a hour of my house and not a single 370Z at any of them. I checked ebay, Amazon, Google Marketplace all without success. I even tried finding the OEM Nismo Airbag Bypass product without success. I posted on Facebook marketplace a week ago without success as well. I have the resistors and weight sensor bypass, however these little yellow plugs are impossible to find. Does anybody know where I can find them or have some for sale? I will pay good money for them, I just need to find them.

SouthArk370Z · 03-24-2020, 03:55 PM

Quote:

Originally Posted by LENTZ

ISO: SEAT AIRBAG CONNECTORS

...

The FSM will have the plug specs listed. There is a generic connector type given. You should be able to find a supplier online.

Stormtroopr · 08-20-2020, 07:10 AM

Hi !
I installed 4.7ohm resistors as explained in the first post.
My problem is I m not able to reset this stupid light on my 2016 Z. I tried these process :
Flashing Airbag Light After HU Install

separris · 01-28-2022, 03:27 PM

There are two airbag lights...one located with the tach, and the other near the glove box for the passenger seat airbag.

To confirm, the airbag light located with the tach will turn off with the install of the two resistors and without installing the passenger weight sensor. Correct?

I have replaced my seats, and have the oem seatbelts connected. I have the resistor in place on both the drive and passenger airbag plug under the seat. I do not have the passenger weight sensor connected. I am getting a airbag code 15 (1 long, 5 short flashes on airbag light located with tach).

I just need to confirm that I do not have to have the passenger weight sensor installed in order to make the flashing airbag light go out that is located with the tach.

2011 Nismo#91 · 05-20-2022, 08:21 AM

Will the 4.7ohm resistor work for any airbag in the car?

Txernyuk · 09-05-2022, 07:28 PM

Quote:

Originally Posted by Equinox

4.7k will not work, you need 4.7 ohm, you may need to buy online.

http://shop.vetcosurplus.com/catalog...oducts_id=8054

Where is this resistance value (4.7Ω) being referenced from?

mikeg32494 · 11-07-2023, 02:34 PM

Getting ready to do this to my 2018, hopefully the procedure is the same.....

ZETIRED · 08-04-2024, 06:15 PM

Quote:

Originally Posted by redondoaveb

I just did the resistor add for the Recaro that I just installed. I had to cut the plug off my stock seat (but I didn't care). I did the airbag reset and it worked perfectly.

how does one do an Air bag reset? I have a 2010 roadster with sensor problems.
Thanks
Ralf Caliebe
r.caliebe@gmail.com

NorthStyle · 08-10-2024, 04:05 AM

Quote:

Originally Posted by ZETIRED

how does one do an Air bag reset? I have a 2010 roadster with sensor problems.
Thanks
Ralf Caliebe
r.caliebe@gmail.com

Flashing Airbag Light After HU Install

06-06-2019, 10:57 PM	#226 (permalink)
vq37818 Base Member Join Date: Aug 2016 Location: Glendale Posts: 97 Drives: 19' 370z 6MT Rep Power: 9	Anyone try the passenger airbag sensor in a fixed Bride seat? Wondering if the pad would fit fine under the cushions... Thanks in advance. __________________ 2019 370z Sport 6MT \| Magnetic Black

02-06-2020, 03:20 PM	#229 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,361 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	I just did the resistor add for the Recaro that I just installed. I had to cut the plug off my stock seat (but I didn't care). I did the airbag reset and it worked perfectly. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

01-28-2022, 03:27 PM	#234 (permalink)
separris Base Member Join Date: Jan 2019 Location: Lyman, South Carolina Posts: 5 Drives: 13 Nissan 370z Grey Rep Power: 6	Just to be clear...? There are two airbag lights...one located with the tach, and the other near the glove box for the passenger seat airbag. To confirm, the airbag light located with the tach will turn off with the install of the two resistors and without installing the passenger weight sensor. Correct? I have replaced my seats, and have the oem seatbelts connected. I have the resistor in place on both the drive and passenger airbag plug under the seat. I do not have the passenger weight sensor connected. I am getting a airbag code 15 (1 long, 5 short flashes on airbag light located with tach). I just need to confirm that I do not have to have the passenger weight sensor installed in order to make the flashing airbag light go out that is located with the tach.

05-20-2022, 08:21 AM	#235 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,400 Drives: slowly Rep Power: 40569	Will the 4.7ohm resistor work for any airbag in the car? __________________ GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
airbag light?	JAYNO20	Exterior & Interior	1	05-15-2012 10:19 PM
AIRBAG LIGHT ON ! help !	maurim3	Exterior & Interior	0	04-10-2012 08:52 PM
passenger airbag light	ThreeSeventyZ	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	07-06-2011 07:59 PM
airbag light	fonZie	Audio & Video	2	04-15-2011 05:10 PM

10-01-2019, 06:17 AM	#228 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,255 Drives: 2011 370Z Nismo Rep Power: 24277	Just find someone who's parting out a wrecked Z and buy the pigtails. Always a few up on Facebook or if you're not in FB, car-part.com has a hundred or so wrecked Z's from all over the country.

03-24-2020, 02:27 PM	#231 (permalink)
LENTZ Base Member Join Date: Jun 2015 Location: Maple Valley, WA Posts: 92 Drives: 2012 370Z Sport Rep Power: 10	ISO: SEAT AIRBAG CONNECTORS I spent the morning calling all the junkyards within a hour of my house and not a single 370Z at any of them. I checked ebay, Amazon, Google Marketplace all without success. I even tried finding the OEM Nismo Airbag Bypass product without success. I posted on Facebook marketplace a week ago without success as well. I have the resistors and weight sensor bypass, however these little yellow plugs are impossible to find. Does anybody know where I can find them or have some for sale? I will pay good money for them, I just need to find them.

08-20-2020, 07:10 AM	#233 (permalink)
Stormtroopr Base Member Join Date: Apr 2016 Location: Paris, FRANCE Posts: 30 Drives: 16 nismo 370Z Wh M6 Rep Power: 9	Hi ! I installed 4.7ohm resistors as explained in the first post. My problem is I m not able to reset this stupid light on my 2016 Z. I tried these process : Flashing Airbag Light After HU Install

11-07-2023, 02:34 PM	#237 (permalink)
mikeg32494 Base Member Join Date: May 2022 Location: CA Posts: 2 Drives: 18 370z ST Rep Power: 3	Getting ready to do this to my 2018, hopefully the procedure is the same.....