|
Measure voltage at battery with engine running - should be approximately 14 V. Take the car for a 1-2 hour trip then check battery voltage with engine off - should
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
06-14-2015, 06:29 AM
|
#4 (permalink) |
|
Premium Member
 
Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324198   |
Measure voltage at battery with engine running - should be approximately 14 V.
Take the car for a 1-2 hour trip then check battery voltage with engine off - should be around 13 V. Let car sit overnight and measure battery voltage again - if less than 12 V or so, you have a bad battery or a parasitic drain. Most electrical items in the car will auto-shutdown after a while when the ignition is off. I don't remember if the seat warmers are on that list but would be very surprised if not. FSM will have more info.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Battery, Alternator or Starter issue? | ShockWave | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 32 | 05-30-2020 06:27 PM |
| Clutch pedal soft at startup | Read T | Engine & Drivetrain | 14 | 11-06-2014 10:38 PM |
| Tach & speedo grinding upon startup | NXTAZEE | Exterior & Interior | 2 | 07-06-2013 03:12 PM |
| Guys battery issue | aalqaedi | Engine & Drivetrain | 6 | 06-04-2011 02:29 PM |
| knock on startup | Daishi | Engine & Drivetrain | 16 | 12-19-2010 09:41 PM |
1Likes
Threaded Mode
