DIY: Zele Cooling Panel Install
 

Quick install...it took me, a novice, about 10 minutes to install. It's as easy as pop off the fasteners, remove OEM piece, slide new piece in, tighten fasteners.

A note: You have to remove the fasteners on the bumper as well and then slide the Zele piece under it, just like how the OEM piece was. You may also need to remove the OEM hood prop from its resting place to get more clearance (as shown in pic 2).

OEM piece.

http://i4.photobucket.com/albums/y13...psibihe3je.jpg

OEM removed.

http://i4.photobucket.com/albums/y13...psvqkb9iq9.jpg

Zele piece put in.

http://i4.photobucket.com/albums/y13...psfzphcrum.jpg

Everything lines up perfectly.

http://i4.photobucket.com/albums/y13...psn4v16tvv.jpg

Done.

http://i4.photobucket.com/albums/y13...ps77vu5xce.jpg

Fitment is on point. Just as advertised.

http://i4.photobucket.com/albums/y13...pstwx5tb91.jpg

http://i4.photobucket.com/albums/y13...pspwdnghrr.jpg

http://i4.photobucket.com/albums/y13...psnbpv58qu.jpg

http://i4.photobucket.com/albums/y13...ps1fkfb4xe.jpg

http://i4.photobucket.com/albums/y13...psqrznot9e.jpg

http://i4.photobucket.com/albums/y13...psugxq152q.jpg