Nissan 370Z Forum - DIY: Longtube header install (PPE)

Nissan 370Z Forum (http://www.the370z.com/)

- DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)

- - DIY: Longtube header install (PPE) (http://www.the370z.com/diy-section-do-yourself/103828-diy-longtube-header-install-ppe.html)

j-rho

05-18-2015 02:32 AM

DIY: Longtube header install (PPE)

PPE Long-Tube Header install « J-Rho's '67 Camaro Z28 STX build

From
http://www.rhoadescamaro.com/build/w...n-1024x768.jpg
to
http://www.rhoadescamaro.com/build/w...e-1024x768.jpg

Jordo!

05-18-2015 05:02 AM

Nice -- it is a huge chore to get on, but you will not be disappointed.

Expect gains around 20 whp -- it loses a little in a narrow band in the mid range, but the addition of a HFC may mitigate that. Tuning is a must, and if you can tune VVEL you will see even greater gains.

Good luck and keep us posted! :tup:

Mandingo

05-21-2015 08:57 PM

Great job! I hope to do this one day

Brandonnye

05-25-2019 08:41 PM

I know it's been awhile since you posted this but I cannot tighten this last nut. It's the lower middle nut on the driver's side. Do you have any tips on how to get to it? I'm laying down by the transmission trying to reach in but it's not getting me anywhere

Sent from my Pixel 3 XL using Tapatalk

All times are GMT -5. The time now is 02:40 PM.