DIY: SpawnAero CF B-Pillars

bullitt5897 · 10-11-2009, 05:42 PM

Hey everybody,

Here is the long over due DIY for the CF B-pillars from SpawnAero. Enjoy the pictures and videos!

Step 1: Remove the OEM B-pillars try not to break the brackets on the back

Step 2: Put all the tabs into their places

Step 3: Apply strips of 3M double sided tape to the back of the clips (3 strips for the top clip and 4 strips for the bottom 2 clips)

Step 4: Align and place the CF B-Pillars ontop of the clips (press down onto the clips)

Step 5: Slowly remove the CF B-Pillar from the door to the back (make sure all the 3M tape stay on the CF B-Pillar)

Step 6: Remove the clips and place them on the CF B-Pillars

Step 7: Apply the Super glue around the base of the clips and cover the 3M all the way to the CF backing (make sure to have a good bead of glue on the CF backing)

Step 8: Let it dry for about 5-10 minutes

Step 9: Plug them in

Step 10: Your Done go Drink a Beer!

Vids:

YouTube - SpawnAero DIY B Pillars 1/4

YouTube - SpawnAero DIY B Pillars 2/4

YouTube - SpawnAero DIY B Pillars 3/4

YouTube - SpawnAero DIY B Pillars 4/4

ZkansasZ · 10-11-2009, 05:57 PM

awesome project!!!
All of your car parts flow together!

bullitt5897 · 10-11-2009, 09:07 PM

Thanks!

MacDaddy · 10-12-2009, 11:41 AM

Great install DIY, I finally received mine and hopefully will be installing this week. Question, looks like you have rubber stripping on the top and one side of the CF piece. Did this come off the OEM piece or something that you added.
Thanks

mAc

bullitt5897 · 10-12-2009, 01:22 PM

It is OEM when you pull your stock B-Pillars off you will see them. I lost one of the top ones so I went to the auto store and bought some black duct tape. I folded it in half and taped and trimmed it so that only 3-4mm showed. When the B-Pillar is in place you cant even tell

if you have any questions on the install feel free to ask

bullitt5897 · 10-12-2009, 02:29 PM

You got PM

kenchan · 10-12-2009, 02:50 PM

very purdy. nice job.

spearfish25 · 11-05-2009, 12:01 PM

Thanks for the DIY. Couple questions:

1) Are the stock B pillars trash once you take them off? IE, do those tabs break off the stock B pillars or is there a bracket that they seat into? I suppose a little more info on how to remove the stock B pillars is all I need

2) You use the 3M tape on the car to transfer it to the correct spot on the new CF B pillars. When you pull the grommets off the car to put back on the tape to glue, how did you line things up again? It seems easy to put them back on the tape slightly off-center and then final B pillar mounting will be misaligned. I'll try another look through the videos in the mean time.

bullitt5897 · 11-05-2009, 01:05 PM

Spear I applied the tape extremely light to the clips when I went to align the CF B-Pillar... Once I got that aligned I pressed the B-Pillars somewhat firmly but not too much and peeled the B-pillar like in the video. when that happened the tape stuck to the B-Pillar and not the clip leaving me accurate placement to glue the clips to.

In regards to stock removal... the Stock pieces have built it plastic pieces that allow the clips to lock into. However the openings point toward each other only allowing you to pull the B-Pillar out to remove it. I recommend getting a screw driver *BE CAREFUL* and as you begin to pull the B-Pillar work the clips out. Take your time cause the brackets on the back of the B-Pillars are cheap and will break easily.

I hope that helps

AK370Z · 12-09-2009, 06:46 PM

lol.. Mike, any reason WHY you weren't wearing a shirt? Was this upon "Frost's" request?

J/K frost!

kdo2milger · 12-15-2009, 04:16 PM

^

henryv007 · 01-18-2010, 09:14 PM

You might want to try using double back tape and attaching to the stock units. Tried the suggested way and it never really worked out worth a darn. And when you break the stock units they are about $70.00 per side!! Maybe Spawn could make them thinner so they would lay down better with tape. Why replace the stock unit with the chance for a poor fit. The double back tape thing was an issue as listed above. I ended taking mine off as they just didnt fit well enough to match the car.Anyone want them? PM me.

fxroar · 02-14-2010, 07:16 PM

Installing mine right now. I'll provide some phone quality pics when done

fxroar · 02-16-2010, 01:42 AM

Left side turned out perfect. The right side has a tad bit of lift on the top left corner. I'll post pics as soon as I remedy the situation. Might take a few days. I'm a busy man.

henryv007 · 02-17-2010, 05:13 PM

I had the same issues and was not happy with the fit and finish. They didnt fit tight and the tape and glue tended to let go and lift a bit. Good luck, but you might consider just a double back tape to attach them to the stock units. Not near as easy as made out! Good luck, like to see how yours work out.

10-11-2009, 05:42 PM	#1 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	DIY: SpawnAero CF B-Pillars Hey everybody, Here is the long over due DIY for the CF B-pillars from SpawnAero. Enjoy the pictures and videos! Step 1: Remove the OEM B-pillars try not to break the brackets on the back Step 2: Put all the tabs into their places Step 3: Apply strips of 3M double sided tape to the back of the clips (3 strips for the top clip and 4 strips for the bottom 2 clips) Step 4: Align and place the CF B-Pillars ontop of the clips (press down onto the clips) Step 5: Slowly remove the CF B-Pillar from the door to the back (make sure all the 3M tape stay on the CF B-Pillar) Step 6: Remove the clips and place them on the CF B-Pillars Step 7: Apply the Super glue around the base of the clips and cover the 3M all the way to the CF backing (make sure to have a good bead of glue on the CF backing) Step 8: Let it dry for about 5-10 minutes Step 9: Plug them in Step 10: Your Done go Drink a Beer! Vids: YouTube - SpawnAero DIY B Pillars 1/4 YouTube - SpawnAero DIY B Pillars 2/4 YouTube - SpawnAero DIY B Pillars 3/4 YouTube - SpawnAero DIY B Pillars 4/4 NismoZ3409 likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054* Last edited by bullitt5897; 10-11-2009 at 05:45 PM.

10-11-2009, 09:07 PM	#3 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Thanks! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

10-12-2009, 01:22 PM	#5 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	It is OEM when you pull your stock B-Pillars off you will see them. I lost one of the top ones so I went to the auto store and bought some black duct tape. I folded it in half and taped and trimmed it so that only 3-4mm showed. When the B-Pillar is in place you cant even tell if you have any questions on the install feel free to ask __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

10-12-2009, 02:29 PM	#6 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	You got PM __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

11-05-2009, 12:01 PM	#8 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	Thanks for the DIY. Couple questions: 1) Are the stock B pillars trash once you take them off? IE, do those tabs break off the stock B pillars or is there a bracket that they seat into? I suppose a little more info on how to remove the stock B pillars is all I need 2) You use the 3M tape on the car to transfer it to the correct spot on the new CF B pillars. When you pull the grommets off the car to put back on the tape to glue, how did you line things up again? It seems easy to put them back on the tape slightly off-center and then final B pillar mounting will be misaligned. I'll try another look through the videos in the mean time. __________________ 2013 Cadillac V-Wagon, RIP Z

10-11-2009, 05:57 PM	#2 (permalink)
ZkansasZ Base Member Join Date: Oct 2009 Location: www.my350z.com Posts: 31 Drives: Z Rep Power: 16	awesome project!!! All of your car parts flow together!

10-12-2009, 11:41 AM	#4 (permalink)
MacDaddy Base Member Join Date: May 2009 Location: NRH2O, Texas Posts: 32 Drives: 09 370Z MB 7AT Rep Power: 16	Great install DIY, I finally received mine and hopefully will be installing this week. Question, looks like you have rubber stripping on the top and one side of the CF piece. Did this come off the OEM piece or something that you added. Thanks mAc

10-12-2009, 02:50 PM	#7 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	very purdy. nice job.

11-05-2009, 01:05 PM	#9 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Spear I applied the tape extremely light to the clips when I went to align the CF B-Pillar... Once I got that aligned I pressed the B-Pillars somewhat firmly but not too much and peeled the B-pillar like in the video. when that happened the tape stuck to the B-Pillar and not the clip leaving me accurate placement to glue the clips to. In regards to stock removal... the Stock pieces have built it plastic pieces that allow the clips to lock into. However the openings point toward each other only allowing you to pull the B-Pillar out to remove it. I recommend getting a screw driver BE CAREFUL and as you begin to pull the B-Pillar work the clips out. Take your time cause the brackets on the back of the B-Pillars are cheap and will break easily. I hope that helps __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

12-09-2009, 06:46 PM	#10 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	lol.. Mike, any reason WHY you weren't wearing a shirt? Was this upon "Frost's" request? J/K frost! __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

12-15-2009, 04:16 PM	#11 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 59	^ __________________ Project *NISMO*

01-18-2010, 09:14 PM	#12 (permalink)
henryv007 Base Member Join Date: Jul 2009 Location: San Juan Islands Posts: 29 Drives: 2009 370z Nismo Rep Power: 16	You might want to try using double back tape and attaching to the stock units. Tried the suggested way and it never really worked out worth a darn. And when you break the stock units they are about $70.00 per side!! Maybe Spawn could make them thinner so they would lay down better with tape. Why replace the stock unit with the chance for a poor fit. The double back tape thing was an issue as listed above. I ended taking mine off as they just didnt fit well enough to match the car.Anyone want them? PM me.

02-14-2010, 07:16 PM	#13 (permalink)
fxroar Track Member Join Date: Oct 2009 Location: San Diego, CA Posts: 525 Drives: '10 40th Anniversary Rep Power: 17	Installing mine right now. I'll provide some phone quality pics when done __________________ Fast Intentions / K&N / Blox / Evo-R / Uprev / Forgestar 19" F14 / R40 / NST / Z1 / SDCE / H&R / Kenwood / ISS Forged 20" FM10R

02-16-2010, 01:42 AM	#14 (permalink)
fxroar Track Member Join Date: Oct 2009 Location: San Diego, CA Posts: 525 Drives: '10 40th Anniversary Rep Power: 17	Left side turned out perfect. The right side has a tad bit of lift on the top left corner. I'll post pics as soon as I remedy the situation. Might take a few days. I'm a busy man. __________________ Fast Intentions / K&N / Blox / Evo-R / Uprev / Forgestar 19" F14 / R40 / NST / Z1 / SDCE / H&R / Kenwood / ISS Forged 20" FM10R

02-17-2010, 05:13 PM	#15 (permalink)
henryv007 Base Member Join Date: Jul 2009 Location: San Juan Islands Posts: 29 Drives: 2009 370z Nismo Rep Power: 16	I had the same issues and was not happy with the fit and finish. They didnt fit tight and the tape and glue tended to let go and lift a bit. Good luck, but you might consider just a double back tape to attach them to the stock units. Not near as easy as made out! Good luck, like to see how yours work out.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wtb A pillars	captain-nok	Body Interior/Exterior	0	05-04-2012 07:43 PM
A-Pillars blacked out?	FromG2Z	Nissan 370Z General Discussions	25	07-12-2011 03:17 PM
WTB: STOCK B Pillars	htt760	Parts for sale (Private Classifieds)	3	11-18-2010 04:47 PM
OEM B Pillars	phelan	Wanted	1	02-07-2010 05:45 PM
SpawnAero Carbon Fiber?	SOLISIMO	Nissan 370Z General Discussions	20	08-28-2009 05:41 PM