Some Clear Bra Questions

kenchan · 08-05-2014, 09:39 AM

Quote:

Originally Posted by XPEL

kenchan,

Has this happened multiple times or was this your experience from one installation?

multiple times, multiple cars. ive been installing clearbra on my personal cars for a while... they are all
cut like nearly 1/2" too short and requires a lot stretching to fit. and as you know, unless one is VERY careful,
we end up with stretch marks.

XPEL · 08-05-2014, 09:50 AM

Quote:

Originally Posted by kenchan

multiple times, multiple cars. ive been installing clearbra on my personal cars for a while... they are all
cut like nearly 1/2" too short and requires a lot stretching to fit. and as you know, unless one is VERY careful,
we end up with stretch marks.

kenchan,

I completely understand. You're right, the installer must be careful to avoid lift lines, stretch marks, etc... I'm sorry to hear about your experience with the pre-cut patterns. 99% of the time they are spot on to the body line.

Let me know if we can help in any way before the next installation.

tommyguns · 08-05-2014, 04:03 PM

Two questions, how long should I wait to install after having the car repainted, can you recommend an installer in the NY Westchester area.
Thanks

SteveT · 08-07-2014, 10:18 AM

So there are 2 places close to me that use XPEL. I was going to drive over there today to get some estimates on just the bra, the front half, and the whole car. What should I expect to be in the range of pricing for these services? I want to get opinions here before I go over there so I know if they're being honest on their estimates.

Thanks,
Steve

90 ST · 08-07-2014, 11:53 AM

Quote:

Originally Posted by SteveT

So there are 2 places close to me that use XPEL. I was going to drive over there today to get some estimates on just the bra, the front half, and the whole car. What should I expect to be in the range of pricing for these services? I want to get opinions here before I go over there so I know if they're being honest on their estimates.

Thanks,
Steve

I would also look at getting the rockers done, if you don't get the whole car done, and if your going to DD it. If I did it over now knowing where the problems are I would just do the front half and rockers.

pfdaxe · 08-07-2014, 11:29 AM

For Xpel: Can you do Amuse bumpers? I see on local site everything is precut

SteveT · 08-07-2014, 11:56 AM

Thanks 90 ST

Any idea on prices of parts/labor?

90 ST · 08-07-2014, 12:09 PM

Quote:

Originally Posted by SteveT

Thanks 90 ST

Any idea on prices of parts/labor?

I don't, i'm in Canada so our pricing is probably very different. But get a good film, as the guys have mentioned.

kenchan · 08-07-2014, 01:45 PM

i just used a generic 6" width roll of clearbra for the rockers

08-05-2014, 04:03 PM	#3 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 18	Two questions, how long should I wait to install after having the car repainted, can you recommend an installer in the NY Westchester area. Thanks __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

08-07-2014, 11:29 AM	#6 (permalink)
pfdaxe A True Z Fanatic Join Date: Aug 2012 Location: Phoenix, AZ Posts: 1,070 Drives: 09 Touring AT Sport Rep Power: 16	For Xpel: Can you do Amuse bumpers? I see on local site everything is precut __________________ Build Thread: http://www.the370z.com/members-370z-...xes-build.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Paint-chip touch-up and then clear-bra? Or re-spray and then clear-bra? Or neither?	ruxtpin	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	14	12-23-2013 08:00 PM
Anyone Use Clear Plastidip in place of Clear Bra?	sv nismo	Exterior & Interior	13	10-11-2012 09:01 AM
Questions, questions and more questions for a potential 370z buyer!	tag824	Nissan 370Z General Discussions	67	09-18-2010 12:07 AM
clear bras are sheets of clear laminate film?	elm_tx	Exterior & Interior	9	08-25-2010 08:46 AM

08-07-2014, 10:18 AM	#4 (permalink)
SteveT Base Member Join Date: Oct 2012 Location: Phoenix, AZ Posts: 16 Drives: 2014 Nismo White Rep Power: 13	So there are 2 places close to me that use XPEL. I was going to drive over there today to get some estimates on just the bra, the front half, and the whole car. What should I expect to be in the range of pricing for these services? I want to get opinions here before I go over there so I know if they're being honest on their estimates. Thanks, Steve

08-07-2014, 11:56 AM	#7 (permalink)
SteveT Base Member Join Date: Oct 2012 Location: Phoenix, AZ Posts: 16 Drives: 2014 Nismo White Rep Power: 13	Thanks 90 ST Any idea on prices of parts/labor?

08-07-2014, 01:45 PM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i just used a generic 6" width roll of clearbra for the rockers