Paint correction - what do i need to buy? And hard water Q

BrandonSS · 03-20-2014, 01:05 PM

I always wash the car in a self serve bay at Mike's and never dry with anything other than air OR I wash it at home with a wool mitt and again air dry.

However, the car is riddled with swirl marks and it needs fixed. I used my generic mequires compound and it's not making any impact.

So, what do I need and where do I get it? Someone help me with a shopping cart list.

Thanks!

Oh and the line to my garage is not on the softner line, so it gives me hard water. I thought about rigging a RV style filter in line but curious as to what others have done. This is primarily why I have been going to mikes since their spot free rinse is filtered.

zaimer · 03-20-2014, 01:13 PM

Meguiar's Ultimate Compound follow by Ultimate Polish using a buffer/DA should take the swirls out..unless they are severe. I would also walk through your wash process and figure out what it is causing the swirls on your paint (unless they were there when you got the car?). There's no point in paint correction if your washing is going to make swirls again.

As far as washing a car using hard water..it is possible. It is bit more time sensitive though. The main thing is do not let the water DRY on your car. You don't necessarily need soft water..just be sure to wipe the car down when you are done washing it. If you are washing the car in the sun or hot temperatures (which I don't recommend anyway), you may want to wash the car one panel at a time, drying it as you go.

Chuck33079 · 03-20-2014, 01:19 PM

Are you doing this by hand? If so, give up and buy a polisher. I love my Porter Cable. Others swear by the flex. Then PM Junkman here because he will give you more info in one pm that we will in a long thread.

BrandonSS · 03-20-2014, 01:44 PM

No I have a random orbital. But wouldnt be opposed to buying a new one. The Meguires Ultimate Compound hasnt made any noticeable difference in the finish.

As for wash methods... I use the two bucket method.

Chuck33079 · 03-20-2014, 01:46 PM

I don't think that's going to be the difference maker. I bought the Prima sampler and their "cut" polish did a great job on my swirls, but they weren't too bad to start with. Maybe a more aggressive pad?

BigT · 03-20-2014, 02:41 PM

What color pads, pressure, and # of passes are you polishing with?

critical · 03-20-2014, 02:45 PM

junkman

search for his youtube videos

BrandonSS · 03-20-2014, 02:59 PM

instead of asking me questions, tell me what I should use

I'm 31 and my 370 is my 17th car. I've always just washed, clayed, polished, waxed, etc. Any paint correction needed I took to a buddy that owned a detailing business but he has since moved. I'd rather begin doing it myself.

As for color pads, nope. Just using a r.o with either wool, microfiber, or terry... definitely not the right stuff for the job. I need to add a circular and foam pads to my arsenal.

My paint is no way painful to look at, but i definitely see swirls, especially at an angle.

zaimer · 03-20-2014, 04:17 PM

If your random orbital isn't some cheapo, i would think it should work. Maybe it doesn't have enough speed to do the job

. Or as a previous member had mentioned, you may need a more aggressive pad. I had fairly decent swirls on my 350z and I used a foam pad with Meguiar's Ultimate compound. The finish was flawless after I was done. I can't imagine that you have bad enough swirls that it wouldn't work.

BrandonSS · 03-20-2014, 04:44 PM

Quote:

Originally Posted by zaimer

If your random orbital isn't some cheapo, i would think it should work. Maybe it doesn't have enough speed to do the job

. Or as a previous member had mentioned, you may need a more aggressive pad. I had fairly decent swirls on my 350z and I used a foam pad with Meguiar's Ultimate compound. The finish was flawless after I was done. I can't imagine that you have bad enough swirls that it wouldn't work.

I've never used foam pads so that very well may do the trick. I can at least start there but was hoping to get some recommendations on better products than meguires. Or, are they "good enough?"

Junkman2008 · 03-20-2014, 10:02 PM

Quote:

Originally Posted by BrandonSS

I've never used foam pads so that very well may do the trick. I can at least start there but was hoping to get some recommendations on better products than meguires. Or, are they "good enough?"

You are Charles Barkley on a golf course. I stood on the hood of my car and dug my shoes into the paint. I then commenced to fixing that damage with the very products that you say are not working. Do you know why? I do, it's called technique. No matter what you use, you are never going to have any success until you learn a proper buffing technique. The guys in this thread are trying to answer your questions but you are not listening. So let me make it real easy for you.

WATCH.

BrandonSS · 03-20-2014, 11:16 PM

No need to be a ****. I want the proper supplies and then I will learn to use them prior to busting them out.

I swear, detail guys are the snobbiest of them all...

Junkman2008 · 03-21-2014, 06:40 AM

Quote:

Originally Posted by BrandonSS

No need to be a ****. I want the proper supplies and then I will learn to use them prior to busting them out.

I swear, detail guys are the snobbiest of them all...

I'm not being snobby, I'm just trying to wake you up. Since I can't reach across TCP/IP and shake you real hard, this is the best that I can do. Straight forward, plain and simple to the point advice. Like I said, the other guys in this thread were trying to tell you what to do and you weren't listening. It seems that I have gotten your attention.

We Marines kinda have a way of doing that.

MacCool · 03-21-2014, 06:52 AM

If you don't want to take Junkman's excellent advice, go over to Adam's Polishes and review their video series.

Instructional Detailing Videos

H2O_Doc · 03-21-2014, 06:55 AM

Hard to be snobby when your name is Junkman.

Now if you had gone with another title I could see it. Something like -

The Grand Poobah of Carnuba

The Boss of Gloss

The Wax-tastic Master of Shine

The Polymer Prince

Sir Buffsalot

The Prime Minister of a Shine so Sinister

The Saint of Paint

I can keep going...probably for days.

03-20-2014, 01:05 PM	#1 (permalink)
BrandonSS Track Member Join Date: Apr 2013 Location: Indianapolis Age: 43 Posts: 644 Drives: 2009 370z T/S/techM6 Rep Power: 13	Paint correction - what do i need to buy? And hard water Q I always wash the car in a self serve bay at Mike's and never dry with anything other than air OR I wash it at home with a wool mitt and again air dry. However, the car is riddled with swirl marks and it needs fixed. I used my generic mequires compound and it's not making any impact. So, what do I need and where do I get it? Someone help me with a shopping cart list. Thanks! Oh and the line to my garage is not on the softner line, so it gives me hard water. I thought about rigging a RV style filter in line but curious as to what others have done. This is primarily why I have been going to mikes since their spot free rinse is filtered.

03-20-2014, 01:19 PM	#3 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Are you doing this by hand? If so, give up and buy a polisher. I love my Porter Cable. Others swear by the flex. Then PM Junkman here because he will give you more info in one pm that we will in a long thread. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

03-20-2014, 01:44 PM	#4 (permalink)
BrandonSS Track Member Join Date: Apr 2013 Location: Indianapolis Age: 43 Posts: 644 Drives: 2009 370z T/S/techM6 Rep Power: 13	No I have a random orbital. But wouldnt be opposed to buying a new one. The Meguires Ultimate Compound hasnt made any noticeable difference in the finish. As for wash methods... I use the two bucket method. Last edited by BrandonSS; 03-20-2014 at 01:47 PM.

03-20-2014, 01:46 PM	#5 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	I don't think that's going to be the difference maker. I bought the Prima sampler and their "cut" polish did a great job on my swirls, but they weren't too bad to start with. Maybe a more aggressive pad? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

03-20-2014, 02:41 PM	#6 (permalink)
BigT Enthusiast Member Join Date: Jan 2012 Location: NJ Posts: 469 Drives: 98 2g DSM Rep Power: 13	What color pads, pressure, and # of passes are you polishing with? __________________ 2014 Jeep GC 1998 Talon TSI awd 2011 Z Sport - SOLD

03-20-2014, 01:13 PM	#2 (permalink)
zaimer Base Member Join Date: Jan 2014 Location: Wisconsin Posts: 160 Drives: Q60S Rep Power: 11	Meguiar's Ultimate Compound follow by Ultimate Polish using a buffer/DA should take the swirls out..unless they are severe. I would also walk through your wash process and figure out what it is causing the swirls on your paint (unless they were there when you got the car?). There's no point in paint correction if your washing is going to make swirls again. As far as washing a car using hard water..it is possible. It is bit more time sensitive though. The main thing is do not let the water DRY on your car. You don't necessarily need soft water..just be sure to wipe the car down when you are done washing it. If you are washing the car in the sun or hot temperatures (which I don't recommend anyway), you may want to wash the car one panel at a time, drying it as you go.

03-20-2014, 02:45 PM	#7 (permalink)
critical A True Z Fanatic Join Date: Oct 2012 Location: Washington Posts: 1,252 Drives: 09' 370z 7AT Rep Power: 16	junkman search for his youtube videos SouthArk370Z likes this. __________________ Quaife w/ gears \|Stillen Gen 3\|SOLD FI Resonated Test Pipes \|SOLD FI 18'' \| 25row Stillen Race \| Progress 35mm/25mm sways \| Swifts/Koni\|Volk G25's\| Stoptech SS lines\|\|SPL Front/Rear Arms\|

03-20-2014, 02:59 PM	#8 (permalink)
BrandonSS Track Member Join Date: Apr 2013 Location: Indianapolis Age: 43 Posts: 644 Drives: 2009 370z T/S/techM6 Rep Power: 13	instead of asking me questions, tell me what I should use I'm 31 and my 370 is my 17th car. I've always just washed, clayed, polished, waxed, etc. Any paint correction needed I took to a buddy that owned a detailing business but he has since moved. I'd rather begin doing it myself. As for color pads, nope. Just using a r.o with either wool, microfiber, or terry... definitely not the right stuff for the job. I need to add a circular and foam pads to my arsenal. My paint is no way painful to look at, but i definitely see swirls, especially at an angle.

03-20-2014, 04:17 PM	#9 (permalink)
zaimer Base Member Join Date: Jan 2014 Location: Wisconsin Posts: 160 Drives: Q60S Rep Power: 11	If your random orbital isn't some cheapo, i would think it should work. Maybe it doesn't have enough speed to do the job . Or as a previous member had mentioned, you may need a more aggressive pad. I had fairly decent swirls on my 350z and I used a foam pad with Meguiar's Ultimate compound. The finish was flawless after I was done. I can't imagine that you have bad enough swirls that it wouldn't work.

03-20-2014, 11:16 PM	#12 (permalink)
BrandonSS Track Member Join Date: Apr 2013 Location: Indianapolis Age: 43 Posts: 644 Drives: 2009 370z T/S/techM6 Rep Power: 13	No need to be a ***. I want the proper supplies and then I will learn to use them prior to busting them out. I swear, detail guys are the snobbiest of them all... Last edited by BrandonSS; 03-20-2014 at 11:20 PM.*

03-21-2014, 06:52 AM	#14 (permalink)
MacCool A True Z Fanatic Join Date: Apr 2011 Location: Midwest Posts: 1,349 Drives: 370Z PW 2014 Rep Power: 16	If you don't want to take Junkman's excellent advice, go over to Adam's Polishes and review their video series. Instructional Detailing Videos

03-21-2014, 06:55 AM	#15 (permalink)
H2O_Doc A True Z Fanatic Join Date: Apr 2013 Location: Northern VA Posts: 1,083 Drives: '14 370Z, '12 4Runr Rep Power: 14	Hard to be snobby when your name is Junkman. Now if you had gone with another title I could see it. Something like - The Grand Poobah of Carnuba The Boss of Gloss The Wax-tastic Master of Shine The Polymer Prince Sir Buffsalot The Prime Minister of a Shine so Sinister The Saint of Paint I can keep going...probably for days. Junkman2008, dP3NGU1N, RonRizz and 2 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hard Water Spots HELP!	Mr&Mrs	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	14	11-06-2012 05:36 PM
Santa Clara hard or soft water?	Stuberty	Northern California Region	3	05-25-2012 08:03 PM
For those of you with hard town/city water..	Methodical4u	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	5	07-04-2011 03:40 PM
Hard water, rust stain removal advice	ban25	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	14	04-20-2011 09:03 AM
sprinkler or hard water on my paint..	darthanakin23	Nissan 370Z General Discussions	20	09-17-2010 07:32 PM